Effect of Reheating Temperature and Cooling Treatment on the Microstructure, Texture, and Impact Transition Behavior of Heat-Treated Naval Grade HSLA Steel
Source abstract
Abstract
In order to achieve the desired mechanical properties [YS > 390 MPa, total elongation >16 pct and Charpy impact toughness of 78 J at 213 K (−60 °C)] for naval application, samples from a low-carbon microalloyed steel have been subjected to different austenitization (1223 K to 1523 K) (950 °C to 1250 °C) and cooling treatments (furnace, air, or water cooling). The as-rolled steel and the sample air cooled from 1223 K (950 °C) could only achieve the required tensile properties, while the sample furnace cooled from 1223 K (950 °C) showed the best Charpy impact properties. Water quenching from 1223 K (950 °C) certainly contributed to the strength but affected the impact toughness. Overall, predominantly ferrite matrix with fine effective grain size and intense gamma-fiber texture was found to be beneficial for impact toughness as well as impact transition behavior. Small size and fraction of precipitates (like TiN, Nb, and V carbonitrides) eliminated the possibility of particle-controlled crack propagation and grain size-controlled crack propagation led to cleavage fracture. A simplified analytical approach has been used to explain the difference in impact transition behavior of the investigated samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. J. L. H. R.W. Hertzberg, R.P. Vinci, Deformation and Fracture Mechanics of Engineering Materials, Wiley New York, 1996.
2. S. Y. Shin, B. Hwang, S. Lee, N. J. Kim, and S. S. Ahn, Mater. Sci. Eng. A, 2007, vol. 458, pp. 281-289.10.1016/j.msea.2006.12.097 ↗
3. H. J. Jun, J. S. Kang, D. H. Seo, K. B. Kang, and C. G. Park, Mater. Sci. Eng. A, 2006, vol. 422, pp. 157-162.10.1016/j.msea.2005.05.008 ↗
4. Y. Terada, M. Yamashita, T. Hara, H. Tamehiro, and N. Ayukawa, Nippon Steel Tech. Rep., 1997, issue. 72, pp. 47–52.
5. B. K. Show, R. Veerababu, R. Balamuralikrishnan, and G. Malakondaiah, Mater. Sci. Eng. A, 2010, vol. 527, pp. 1595–1604.10.1016/j.msea.2009.10.049 ↗
6. T. Gladman, The Physical Metallurgy of Microalloyed Steels, Maney, London, 2002.
7. M. A. Linaza, J. L. Romero, J. M. Rodríguez-Ibabe, and J. J. Urcola, Scr. Metall. Mater., 1995, vol. 32, pp. 395-400.10.1016/S0956-716X(99)80071-5 ↗
8. A. Ghosh, A. Ray, D. Chakrabarti, and C. L. Davis, Mater. Sci. Eng. A, 2013, vol. 561, pp. 126-135.10.1016/j.msea.2012.11.019 ↗
9. A. Ghosh, S. Sahoo, M. Ghosh, R. N. Ghosh, and D. Chakrabarti, Mater. Sci. Eng. A, 2014, vol. 613, pp. 37-47.10.1016/j.msea.2014.06.091 ↗
10. R. Balamuralikrishnan, Studies of Bonding and Void Nucleation at Inclusion-Matrix Interfaces in Steel, Carnegie Mellon University, Pittsburgh, 1998.
11. M.-C. Kim, Y. Jun Oh, and J. Hwa Hong, Scr. Mater., 2000, vol. 43, pp. 205-211.10.1016/S1359-6462(00)00392-4 ↗
12. D. Bhattacharjee and C. L. Davis, Scr. Mater., 2002, vol. 47, pp. 825-830.10.1016/S1359-6462(02)00324-X ↗
13. A. Ghosh, S. Kundu, and D. Chakrabarti, Scr. Mater., 2014, vol. 81, pp. 8-11.10.1016/j.scriptamat.2014.02.007 ↗
14. B. Hwang, C. G. Lee, and S.-J. Kim, Metall. Mater. Trans. A, 2011, vol. 42, pp. 717-728.10.1007/s11661-010-0448-3 ↗
15. D. Chakrabarti, C. Davis, M. Strangwood, Mater. Charact., 2007, vol. 58, pp. 423-438.10.1016/j.matchar.2006.06.014 ↗
16. ASTM E8: Annual Book of ASTM Standards. ASTM, West Conshohocken, PA, 2009.
17. ASTM E23: Annu. B. ASTM Stand. ASTM, West Conshohocken, PA, 2009.
18. Y. Sakai, K. Tamanoi, and N. Ogura, Nucl. Eng. Des., 1989, vol. 115, pp. 31-39.10.1016/0029-5493(89)90257-4 ↗
19. D. Chakrabarti, M. Strangwood, and C. Davis, Metall. Mater. Trans. A, 2009, vol. 40, pp. 780-795.10.1007/s11661-009-9794-4 ↗
20. A. Echeverría, and J. M. Rodriguez-Ibabe, Mater. Sci. Eng. A, 2003, vol. 346, pp. 149-158.10.1016/S0921-5093(02)00538-5 ↗
21. S. Patra, A. Ghosh, J. Sood, L. K. Singhal, A. S. Podder, D. Chakrabarti, Mater. Des., 2016, vol. 106, pp. 336-348.10.1016/j.matdes.2016.05.100 ↗
22. A. Chatterjee, D. Chakrabarti, A. Moitra, R. Mitra, and A. K. Bhaduri, Mater. Sci. Eng. A, 2014, vol. 618, pp. 219-231.10.1016/j.msea.2014.09.021 ↗
23. A. Chatterjee, D. Chakrabarti, A. Moitra, R. Mitra, and A. K. Bhaduri, Mater. Sci. Eng. A, 2015, vol. 630, pp. 58-70.10.1016/j.msea.2015.01.076 ↗
24. F. G. Caballero, H. Roelofs, S. Hasler, C. Capdevila, J. Chao, J. Cornide, and C. Garcia-Mateo, Mater. Sci. Technol., 2012, vol. 28, pp. 95-102.10.1179/1743284710Y.0000000047 ↗
25. S. Morito, X. Huang, T. Furuhara, T. Maki, and N. Hansen, Acta Mater., 2006, vol. 54, pp. 5323-5331.10.1016/j.actamat.2006.07.009 ↗
26. S. Morito, H. Saito, T. Ogawa, T. Furuhara, and T. Maki, ISIJ Int., 2005, vol. 45, pp. 91-94.10.2355/isijinternational.45.91 ↗
27. R. K. Ray, J. J. Jonas, Int. Mater. Rev., 1990, vol. 35, pp. 1-36.10.1179/095066090790324046 ↗
28. F. G. Caballero, J. Chao, J. Cornide, C. García-Mateo, M. J. Santofimia, and C. Capdevila, Mater. Sci. Eng. A, 2009, vol. 525, pp. 87-95.10.1016/j.msea.2009.06.034 ↗
29. R. K. Ray, J. J. Jonas, R. E. Hook, Int. Mater. Rev., 1994, vol. 39, pp. 129-172.10.1179/imr.1994.39.4.129 ↗
30. T. Tomida, M. Wakita, M. Yasuyama, S. Sugaya, Y. Tomota, S. C. Vogel, Acta Mater., 2013, vol. 61, pp. 2828-2839.10.1016/j.actamat.2013.01.015 ↗
31. R. Horstman, K. Lieb, R. Meltzer, I. Moore, W. L. Server, J. Test. Eval., 1978, vol. 6, pp. 29.10.1520/JTE10915J ↗
32. J.F. Knott, Fundamentals of Fracture Mechanics, Butterworths, London, 1976.
33. D. Bhattacharjee, J. F. Knott, and C. L. Davis, Metall. Mater. Trans. A, 2004, vol. 35, pp. 121-130.10.1007/s11661-004-0115-7 ↗
34. K. Shibanuma and S. Aihara, Tetsu-to-Hagane, 2012, vol. 98, pp. 184-189.10.2355/tetsutohagane.98.184 ↗
35. S. Aihara and Y. Tanaka, Acta Mater., 2011, vol. 59, pp. 4641-4652.10.1016/j.actamat.2011.04.010 ↗
36. H.K.D.H. Bhadeshia, Bainite in Steel, Second edition, IOM Communications, London, 1991.
37. T. Saario, K. Wallin, and K. Torronen, J. Eng. Mater. Technol., 1984, vol. 106, pp. 173-177.10.1115/1.3225695 ↗
38. D. A. Curry, J. F. Knott, Met. Sci., 1978, vol. 12, pp. 511-514.10.1179/msc.1978.12.11.511 ↗
39. C. Yan, J. H. Chen, J. Sun, and Z. Wang, Metall. Trans. A, 1993, vol. 24, pp. 1381-1389.10.1007/BF02668206 ↗
40. A. A. Griffith, Philos. Trans. R. Soc. A Math. Phys. Eng. Sci., 1921, vol. 221, pp. 163-198.10.1098/rsta.1921.0006 ↗
41. E. Orowan, Trans. Inst. Eng. Shipbuild. Scotl., 1946, vol. 80, pp. 165-196.
42. C. Zener, Trans. ASM, 1948, vol. 40 A, pp. 3-31.
43. A. N. Stroh, Proc. R. Soc. A Math. Phys. Eng. Sci., 1954, vol. 223, pp. 404-414.10.1098/rspa.1954.0124 ↗
44. E. Smith: Proceedings of the conference on physical basis of yield and fracture. Institute of Physics and the Physical Society, Oxford, 1966, p. 36.
45. A. H. Cottrell, Trans. AIME, 1958, vol. 212, pp. 192-203.
46. D. Hull, Acta Metall., 1960, vol. 8, pp. 11-18.10.1016/0001-6160(60)90133-4 ↗
47. T. Lindley, G. Oates, and C. Richards, Acta Metall., 1970, vol. 18, pp. 1127-1136.10.1016/0001-6160(70)90103-3 ↗
48. P. Bowen, S. G. Druce, and J. F. Knott, Acta Metall., 1986, vol. 34, pp. 1121-1131.10.1016/0001-6160(86)90222-1 ↗
49. N. J. Petch, Acta Metall., 1986, vol. 34, pp. 1387-1393.10.1016/0001-6160(86)90026-X ↗
50. J. San Martin, JI; Rodriguez-Ibabe, Scr. Mater., 1999, vol. 40, pp. 459-464.10.1016/S1359-6462(98)00467-9 ↗
51. J. H. Chen, G. Z. Wang, C. Yan, H. Ma, and L. Zhu, Int. J. Fract., 1997, vol. 83, pp. 139-157.10.1023/A:1007309017416 ↗
52. D. P. Fairchild, D. G. Howden, and W. A. T. Clark, Metall. Mater. Trans. A, 2000, vol. 31, pp. 653-667.10.1007/s11661-000-0008-3 ↗
53. L. P. Zhang, C. L. Davis, and M. Strangwood, Metall. Mater. Trans. A, 2001, vol. 32, pp. 1147-1155.10.1007/s11661-001-0125-7 ↗
54. W. Yan, Y. Y. Shan, and K. Yang, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2007, vol. 38, pp. 1211-1222.10.1007/s11661-007-9161-2 ↗
55. P. Bowen, J.F. Knott, Metals. Sci., 1984, vol. 18, pp. 225-235.10.1179/030634584790420131 ↗
56. S. Kim, S. Lee, B. S. Lee, Mater. Sci. Eng. A, 2003, vol. 359, pp. 198-209.10.1016/S0921-5093(03)00344-7 ↗
57. C. Wang, M. Wang, J. Shi, W. Hui, H. Dong, Scripta Materialia, 2008, vol. 58, pp. 492-495.10.1016/j.scriptamat.2007.10.053 ↗
58. L. Rancel, M. Gómez, S.F. Medinaa, I. Gutierrez, Materials Science and Engineering A, 2011, vol. 530, pp. 21–27.10.1016/j.msea.2011.09.001 ↗
59. A.R. Rosenfield, P.K. Dai, and G.T. Hahn, International Conference on Fracture. 1 St, Sendai, Japan, 1966, pp. 223–58.
60. G.H.A.R. Rosenfield: ASM Trans. Quart., 1966, vol. 59, pp. 962–80.
61. W. Lei, X. Van, and M. Yao, Eng. Fract. Mech., 1993, vol. 46, pp. 583-593.10.1016/0013-7944(93)90164-N ↗
62. B. Tanguy, R. Piques, L. Laiarinandrasana, A. Pineau, and C. Mat, Pap. Ref. 5N.206, 2013.
63. P. Larour, A. Bäumer, K. Dahmen, and W. Bleck, Steel Res. Int., 2013, vol. 84, pp. 426-442.10.1002/srin.201200099 ↗
64. K. Shibanuma, S. Aihara, K. Suzuki, Engineering Fracture Mechanics, 2016, vol. 151, pp. 161–180.10.1016/j.engfracmech.2015.03.048 ↗
65. K. Shibanuma, S. Aihara, K. Suzuki, Engineering Fracture Mechanics, 2016, vol. 151, pp. 181–202.10.1016/j.engfracmech.2015.03.049 ↗