journal article·2017-01

Characteristics of Eutectic α(Cr,Fe)-(Cr,Fe)23C6 in the Eutectic Fe-Cr-C Hardfacing Alloy

Hsuan-Han Lai, Chih-Chun Hsieh, Chi-Ming Lin, Weite Wu

Publisher page

Abstract

A specific eutectic (Cr,Fe)-(Cr,Fe)23C6 structure had been previously reported in the research studies of Fe-Cr-C hardfacing alloys. In this study, a close observation and discussion of the eutectic (Cr,Fe)-(Cr,Fe)23C6 were conducted. The eutectic solidification occurred when the chromium content of the alloy exceeded 35 wt pct. The eutectic structure showed a triaxial radial fishbone structure which was the so called “complex regular structure.” Lamellar costa plates showed local asymmetry at two sides of a spine. Individual costae were able to combine as one, and spines showed extra branches. Costae that were nearly parallel to the heat flow direction were longer than those that were vertical to the heat flow direction. The triaxial spines preferred to intersect at 120 deg, while the costae preferred to intersect the spine at 90 deg and 35.26 deg due to the lattice relationships. The solidified metal near the fusion boundary showed an irregular structure instead of a complex regular structure. The reason for the irregular morphology was the high growth rate near the fusion boundary.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. P.F. Mendez, N. Barnes, K. Bell, S.D. Borle, S.S. Gajapathi, S.D. Guest, H. Izadi, A.K. Gol, G. Wood, J. Manuf. Process., 2014, vol.16, pp. 4 - 25.10.1016/j.jmapro.2013.06.011 ↗
2. C.-M. Lin, C.-M. Chang, J.-H. Chen, W. Wu, Mater. Sci. Eng. A, 2010, vol. 527, pp. 5038 - 4310.1016/j.msea.2010.04.073 ↗
3. G. Azimi, M. Shamanian, J. Alloys Compd., 2010, vol. 505, pp. 598 - 603.10.1016/j.jallcom.2010.06.084 ↗
4. J. Yang, J. Tian, F. Hao, T. Dan, X. Ren, Y. Yang, Q. Yang, Appl. Surf. Sci., 2014, vol. 289, pp. 437 - 44.10.1016/j.apsusc.2013.10.186 ↗
5. N. Yüksel, S. Şahin, Mater. Des., 2014, vol. 58, pp. 491 - 98.10.1016/j.matdes.2014.02.032 ↗
6. S.C. Gallo, N. Alam, R. O’Donnell, Surf. Coat. Technol., 2013, vol. 214, pp. 63 - 68.10.1016/j.surfcoat.2012.11.003 ↗
7. Q. Wang, X. Li, Weld. J., 2010, vol. 89, pp. 133s - 39s.
8. S. Atamert, H.K.D.H. Bhadeshia, Mater. Sci. Eng. A, 1990, vol. 130, pp. 101 - 111.10.1016/0921-5093(90)90085-H ↗
9. C. Fan, M.C. Chen, C.M. Chang, W. Wu, Surf. Coat. Technol., 2006, vol. 201, pp. 908 - 12.10.1016/j.surfcoat.2006.01.010 ↗
10. C.M. Chang, C.M. Lin, C.C. Hsieh, J.H. Chen, W. Wu, J. Alloys Compd., 2009, vol. 487, pp. 83 – 8910.1016/j.jallcom.2009.07.134 ↗
11. C.M. Lin, C.M. Chang, J.H. Chen, C.C. Hsieh, W. Wu, Surf. Coat. Technol., 2010, vol. 205, pp. 2590 - 96.10.1016/j.surfcoat.2010.10.004 ↗
12. H.H. Lai, C.C. Hsieh, C.M. Lin, W. Wu, Surf. Coat. Technol., 2014, vol. 239, pp. 233 - 39.10.1016/j.surfcoat.2013.11.048 ↗
13. M.N. Croker, R. S. Fidler and R. W. Smith, J. Cryst. Growth, 1971, vol. 11, pp. 121 - 30.10.1016/0022-0248(71)90175-8 ↗
14. A. Hellawell, Prog. Mater. Sci., 1970, vol. 15, pp. 3 - 78.10.1016/0079-6425(70)90001-0 ↗
15. S.A. Souza, C.T. Rios, A.A. Coelho, P.L. Ferrandini, S. Gama, R. Caram, J. Alloys Compd., 2005, vol. 402, pp. 156 - 61.10.1016/j.jallcom.2005.04.137 ↗
16. W.L. Wang, F.P. Dai, and B.B. Wei: Sci. China Ser. G Phys. Mech. Astron., 2007, vol. 50, pp. 472–90.10.1007/s11433-007-0046-6 ↗
17. G.V. Raynor, V.G. Rivlin, Phase Equilibria in Iron Ternary Alloys, p.143, The Institute of Metals, London, 1988.
18. R. Elliott: Encyclopedia of Materials: Science and Technology, 2nd ed., Elsevier, 2001, pp. 2816–21.10.1016/B0-08-043152-6/00502-7 ↗
19. K.A. Jackson: Liquid Metals and Solidification. A.S.M., Cleveland, 1958, pp. 174–86.
20. C.M. Lin, H.H. Lai, J.C. Kuo, W. Wu, Mater. Charact., 2011, vol. 62, pp. 1124 - 33.10.1016/j.matchar.2011.09.007 ↗
21. M.N. Croker, R.S. Fidler, R.W. Smith, Proc. R. Soc. Lond. A, 1973, vol. 335, pp. 15 - 37.10.1098/rspa.1973.0111 ↗
22. M.N. Croker, D. Baragar, R.W. Smith, J. Cryst. Growth, 1975, vol. 30, pp. 198 - 212.10.1016/0022-0248(75)90090-1 ↗
23. M.R. Taylor, R.S. Fidler, R.W. Smith, Metall. Trans., 1971, vol. 2A, pp. 1793 - 98.10.1007/BF02913407 ↗
24. S. Kuo: Welding Metallurgy, 2nd ed. Wiley, Hoboken, NJ, 2003, pp. 155–67.
25. Y. Koçak, S. Engin, U. Böyük, N. Maraşlı, Curr. Appl. Phys., 2013, vol. 13, pp. 587 - 93.10.1016/j.cap.2012.10.005 ↗
26. K.A. Jackson, J.D. Hunt, Trans. Metall. Soc. AIME, 1966, vol. 236, pp. 1129 - 42.
27. H.H. Lai, C.C. Hsieh, J.S. Wang, C.M. Lin, W. Wu, Metall. Mater. Trans. A, 2015, vol. 46A, pp. 5171 - 81.10.1007/s11661-015-3093-z ↗