Effect of Welding Heat Input on Microstructure and Texture of Inconel 625 Weld Overlay Studied Using the Electron Backscatter Diffraction Method
Source abstract
Abstract
The grain size and the texture of three specimens prepared at different heat inputs were determined using optical microscopy and the electron backscatter diffraction method of scanning electron microscopy. Each specimen was equally divided into fusion line zone (FLZ), columnar dendrite zone (CDZ), and surface zone (SZ), according to the location of the weld. Fine dendrites were observed in the FLZ, coarse dendrites in the CDZ, and dendrites grew perpendicular to the FLZ and CDZ. As the heat input increased, the melted zone in the vicinity of the FLZ widened due to the higher Fe content. A lower image quality value was observed for the FLZ compared to the other zones. The results of grain size measurement in each zone showed that the grain size of the SZ became larger as the heat input increased. From the inverse pole figure (IPF) map in the normal direction (ND) and the rolling direction (RD), as the heat input increased, a specific orientation was formed. However, a dominant [001] direction was observed in the RD IPF map.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. 1.W.F. Smith: Structure and Properties of Engineering Alloy, McGraw-Hill, New York, NY, 1981, p. 466.
2. 2.P. Crook: Metals Handbook, 9th ed., ASM INTERNATIONAL, Materials Park, OH, 1987, p. 641.
3. 3.G.P. Airey: Metallography, 1980, vol. 13 (1), pp. 21-41.10.1016/0026-0800(80)90020-8 ↗
4. 4.R. Age and A. McMinn: Metall. Mater. Trans. A, 1986, vol. 17A, pp. 877-87.
5. 5.J.J. Kai, G.P. Yu, C.H. Tsai, M.N. Liu, and S.C. Yao: Metall. Mater. Trans. A, 1989, vol. 20A, pp. 2057-67.10.1007/BF02650292 ↗
6. 6.Kang Soo Kim, Ho Jin Lee, Bong Sang Lee, In Chul Jung, and Kwang Soo Park: Nucl. Eng. Des., 2009, vol. 239, pp. 2771-77.10.1016/j.nucengdes.2009.08.022 ↗
7. 7.He Xue, Zhijun Li, Zhanpeng Lu, and Tetsuo Shoji: Nucl. Eng. Des., 2011, vol. 241, pp. 731-38.10.1016/j.nucengdes.2010.12.025 ↗
8. 8.K. Shinozaki: J. Jpn. Weld. Soc., 2000, vol. 69 (5), pp. 447-64.10.2207/qjjws1943.69.447 ↗
9. 9.W. Wu and C.H. Tsa: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 417-26.10.1007/s11661-999-0331-2 ↗
10. Li Jian, C.Y. Yuh, and M. Farooque: Corros. Sci., 2000, vol. 42 (9), pp. 1573-85.10.1016/S0010-938X(00)00011-1 ↗
11. 11.M.D. Mathew, P. Parameswaran, and K. Bhanu Sankara Rao: Mater. Characterization, 2008, vol. 59 (5), pp. 508-13.10.1016/j.matchar.2007.03.007 ↗
12. 12.D.E. Jordan: Weld. World, 1998, vol. 4 (1), pp. 1-9.
13. O.H. Madsen: 4th Int. Symp. Waste Treatment Technologies, Sheffield, England, 2003, pp. 1-12.
14. 14.Sanjay K. Rai, Anish Kumar, Vani Shankar, T. Jayakumar, K. Bhanu Sankara Rao, and Baldev Raj: Scripta Mater., 2004, vol. 51 (1), pp. 59-63.10.1016/j.scriptamat.2004.03.017 ↗
15. 15.C. Thomas and P. Tait: Int. J. Pressure Vessel Piping, 1994, vol. 59, pp. 41-49.10.1016/0308-0161(94)90140-6 ↗
16. 16.G.E. Prasad and M.K. Asundi: Trans. Ind. Inst. Met., 1989, vol. 42, pp. 291-98.
17. 20.Joon-Suk Kim and Hae-Woo Lee: Int. J. Electrochem. Sci., 2015, vol. 10 (8), pp. 6454-64.10.1016/S1452-3981(23)06732-9 ↗
18. 17.Dong-Woo Suh, Joo-Hee Kang, Kyu Hwan Oh, and Hu-Chul Lee: Scripta Mater., 2002, vol. 46, pp. 375-78.10.1016/S1359-6462(01)01254-4 ↗
19. 18.Chun-Ming Lin: Surf. Coat. Technol., 2013, vol. 228, pp. 234-41.10.1016/j.surfcoat.2013.04.035 ↗
20. 19.Q. Ma, B. Li, E.B. Marin, and S.J. Horstemeyer: Scripta Mater., 2011, vol. 65 (9), pp. 823-26.10.1016/j.scriptamat.2011.07.046 ↗