Stress-Induced Twinning and Phase Transformations during the Compression of a Ti-10V-3Fe-3Al Alloy
Source abstract
Abstract
A metastable β Ti-10V-3Al-3Fe (wt pct) alloy containing different α phase fractions after thermo-mechanical processing was compressed to 0.4 strain. Detailed microstructure evaluation was carried out using high-resolution scanning transmission electron microscopy and electron back-scattering diffraction. Stress-induced β → α′′ and β → ω transformation products together with {332}〈113〉β and {112}〈111〉β twinning systems were simultaneously detected. The effects of β phase stability and strain rate on the preferential activation of these reactions were analyzed. With an increase in β phase stability, stress-induced phase transformations were restricted and {112}〈111〉β twinning was dominant. Alternatively, less stable β conditions or higher strain rates resulted in the dominance of the {332}〈113〉β twinning system and formation of secondary α′′ martensite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Microstructure and Mechanical Properties of Steels · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. H. Sasano, and T. Suzuki: in “Crystal structure of martensites in Ti-Mo-Al alloys”, presented at the Titanium ‘80, science and technology: proceedings of the Fourth International Conference on Titanium, Kyoto, Japan, 1980.
2. L. C. Zhang, T. Zhou, M. Aindow, S. P. Alpay, M. J. Blackburn, and M. H. Wu, J. Mater. Sci. 40 (2005) 2833-36.10.1007/s10853-005-2426-5 ↗
3. T. W. Duerig, J. Albrecht, D. Richter, and P. Fischer, Acta Metall. 30 (1982) 2161-72.10.1016/0001-6160(82)90137-7 ↗
4. T. Grosdidier and M. J. Philippe, Mater. Sci. Eng. A, 291 (2000) 218-23.10.1016/S0921-5093(00)00921-7 ↗
5. F. Sun, J. Y. Zhang, M. Marteleur, T. Gloriant, P. Vermaut, D. Laillé, et al., Acta Mater., 61 (2013), 6406-17.10.1016/j.actamat.2013.07.019 ↗
6. M. Ahmed, D. Wexler, G. Casillas, O. M. Ivasishin, and E. V. Pereloma, Acta Mater. 84 (2015) 124-35.10.1016/j.actamat.2014.10.043 ↗
7. M. Marteleur, F. Sun, T. Gloriant, P. Vermaut, P. J. Jacques, and F. Prima, Scr. Mater. 66 (2012) 749-52.10.1016/j.scriptamat.2012.01.049 ↗
8. M. Morinaga, T. Maya, K. Sone, and H. Adachi: in: Theoretical design of titanium alloys, Presented at the Sixth World Conference on Titanium Alloys, Cannes, 1988.
9. O. Grässel, L. Krüger, G. Frommeyer, and L. W. Meyer, Int. J. Plast., 16 (2000) 1391-1409.10.1016/S0749-6419(00)00015-2 ↗
10. G. Frommeyer, U. Brüx, and P. Neumann, ISIJ Int., 43(2003), 438-46.10.2355/isijinternational.43.438 ↗
11. S. Lee, Y. Estrin, and B.C. De Cooman, Metall. Mater. Trans. A, 45A (2014), 717-30.10.1007/s11661-013-2028-9 ↗
12. S. Hanada, O. Izumi, Metall. Trans. A. 17 (1986), 1409-2010.1007/BF02650122 ↗
13. T. Furuhara, K. Kishimoto, and T. Maki, Mater. Trans. JIM, 35(12), 1994, 843-50.10.2320/matertrans1989.35.843 ↗
14. T. Grosdidier, C. Roubaud, M.-J. Philippe, and Y. Combres, Scr. Mater., 36 (1997), 21-8.10.1016/S1359-6462(96)00341-7 ↗
15. C. Li, X. Wu, J. H. Chen, and S. van der Zwaag, Mater. Sci. Eng. A, 528 (2011), 5854-60.10.1016/j.msea.2011.03.107 ↗
16. M. Ahmed, D. Wexler, G. Casillas, D.G. Savvakin,and E.V. Pereloma, Acta Mater., 104 (2016), 190-200.10.1016/j.actamat.2015.11.026 ↗
17. C. Li, J. H. Chen, X. Wu, and S. van der Zwaag, Mater. Sci. Eng. A, 573 (2013), 111-18.10.1016/j.msea.2013.03.002 ↗
18. T. Akanuma, H. Matsumoto, S. Sato, A. Chiba, I. Inagaki, Y. Shirai, T. Maeda, Scr. Mater., 67 (2012) 21-24.10.1016/j.scriptamat.2012.03.011 ↗
19. T. Ahmed and H. J. Rack, J. Mater. Sci. 31 (1996) 4267-76.10.1007/BF00356449 ↗
20. K. K. Kharia and H. J. Rack, Metall. Mater. Trans. A, 32 (2001) 671-79.10.1007/s11661-001-1002-0 ↗
21. W. G. Burgers, Physica, 1 (1934) 561-86.10.1016/S0031-8914(34)80244-3 ↗
22. D.G. Savvakin, A. Carman, O. M. Ivasishin, M. Matviychuk, A. A. Gazder, and E.V. Pereloma, Metall. Mater. Trans. A, 43 (2012), 716-23.10.1007/s11661-011-0875-9 ↗
23. M. Ahmed, T. Li, G. Casillas, J. M. Cairney, D. Wexler, and E. V. Pereloma, J. Alloys Compd., 629 (2015) 260-73.10.1016/j.jallcom.2015.01.005 ↗
24. A.A. Gazder, W.-Q. Cao, C.H.J. Davies and E.V. Pereloma, Mater. Sci. Eng. A, 497 (2008) 341-52.10.1016/j.msea.2008.07.030 ↗
25. A.A. Gazder, M. Sánchez-Araiza, J.J. Jonas and E.V. Pereloma, Acta Mater., 59 (2011) 4847-65.10.1016/j.actamat.2011.04.027 ↗
26. R. Hielscher and H. Schaeben, J. Appl. Crystallogr. 41 (2008) 1024-37.10.1107/S0021889808030112 ↗
27. G. Palumbo and K. T. Aust, Acta Metall. Mater. 38 (1990) 2343-52.10.1016/0956-7151(90)90101-L ↗
28. R. Kapoor, A. Sarkar, J. Singh, I. Samajdar, and D. Raabe, Scr. Mater., 74 (2014) 72-75.10.1016/j.scriptamat.2013.10.025 ↗
29. M. Klimova, S. Zherebtsov, G. Salishchev, and S. L. Semiatin, Mater. Sci. Eng. A, 645 (2015) 292-97.10.1016/j.msea.2015.08.008 ↗
30. Y. Takemoto, M. Hida, and A. Sakakibara, J. Jpn. Inst. Metals, 57 (1993), 1471-72.10.2320/jinstmet1952.57.12_1471 ↗
31. S. Ishiyama, S. Hanada, and O. Izumi, ISIJ Int., 31 (1991), 807-13.10.2355/isijinternational.31.807 ↗
32. G. M. Rusakov, A. V. Litvinov, and V. S. Litvinov, Met. Sci. Heat. Treat., 48 (2006), 244-51.10.1007/s11041-006-0078-y ↗
33. Y. Liu and H. Yang, Materials Science and Engineering: A 260 (1999) 240-45.10.1016/S0921-5093(98)00959-9 ↗
34. A. Bhattacharjee, S. Bhargava, V. K. Varma, S. V. Kamat, and A. K. Gogia, Scr. Mater. 53, (2005) 195-200.10.1016/j.scriptamat.2005.03.039 ↗
35. G. B. Olson and M. Cohen, Acta Metall. 27 (1979) 1907-18.10.1016/0001-6160(79)90081-6 ↗
36. S. Nemat-Nasser, J.-Y. Choi, W.-G. Guo, and J. B. Isaacs, Mechanic Mater. 37 (2005) 287-98.10.1016/j.mechmat.2004.03.007 ↗
37. M. Grujicic, G. B. Olson, and W. S. Owen, Metall. Trans. A, 16 (1985) 1713-22.10.1007/BF02670359 ↗
38. J.M. Manero, F.J. Gil, and J.A. Planell, Acta Mater., 48 (2000), 3353-59.10.1016/S1359-6454(00)00152-X ↗
39. H.C. Rogers, J.P. Hirth, and R.E. Reed-Hill: in Deformation Twinning; Proceedings, R.E. Reed-Hill, J.P. Hirth and H.C. Rogers, eds.,1964.
40. M. Oka and Y. Taniguchi, J. Jpn. Inst. Metal, 42 (1978) 814-20.10.2320/jinstmet1952.42.8_814 ↗