Characterization of a Friction Stir Weld in Aluminum Alloy 7055 Using Microhardness, Electrical Conductivity, and Differential Scanning Calorimetry (DSC)
Source abstract
Abstract
Optical microscopy, microhardness, electrical conductivity, and differential scanning calorimetry (DSC) were used to characterize the microstructure, hardness, and precipitate structure as a function of position in a friction stir weld, naturally aged for 10 years, in aluminum alloy 7055. Results are shown for the as-welded/naturally aged condition and for a weld that was post-aged using a –T76 regimen. The grain structure and microhardness results reveal the expected central recrystallized region, a thermo-mechanical affected zone (TMAZ), and heat-affected zone (HAZ) with typical changes in microhardness. DSC scans for the as-welded/naturally aged condition indicate a precipitate structure similar to that of a naturally aged condition in the central recrystallized region. Maximum precipitate coarsening and overaging occurs near the TMAZ/HAZ boundary with reduced precipitate dissolution and coarsening as the distance from the weld increases. The post-weld aging resulted in the transformation of GP zones to more stable precipitates plus coarsening of the more stable η′ and η precipitates. A combination of DSC testing and CALPHAD calculations allowed calculation of precipitate volume fraction in the HAZ. The precipitate volume fraction decreased monotonically from 0.052 in the baseline material to 0.044 at the TMAZ/HAZ interface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Temple-Smith, and C.J. Dawes: GB Patent no. 9125978-8, 1991.
2. W.M. Thomas, E.D. Nicolas, J.C. Needham, M.G. Murch, P. Temple-Smith, and C.J. Dawes: US Patent no. 5 460 317; EPS 0 616 490, 1991.
3. [3] CE Cross, DL Olson, and S Liu, Handbook of Aluminum, Vol 1, Physical Metallurgy and Processes, Marcel Dekker, New York, 2003, pp. 481-532.
4. Threadgill PL, Leonard AJ, Shercliff HR, and Withers PJ, Int. Mat. Rev., Vol. 54, 2009, pp. 49-93.10.1179/174328009X411136 ↗
5. J.C. Ehrström, A. Bigot, L. Cervi, and H. Gérard, AeroMat 2003.
6. B.M. Tweedy, C.A. Widener, and D.A. Burford: 6th International Symposium on Friction Stir Welding Saint-Sauveur, Nr Montréal, Canada, October 10–13, 2006, paper 37.
7. [7] Fuller, C.B., Mahoney, M.W., Calabrese, M., and Micona, L., Mater. Sci. Eng. A, vol. 527, 2010, pp 2233-2240.10.1016/j.msea.2009.11.057 ↗
8. [8] Booth, D.P.P., Starink, M.J., and Sinclair, I, Mater. Sci. Technol., Vol 23, n 3, March 2007, pp 276-284.10.1179/174328407X157290 ↗
9. [9] Dumont, M., Steuwer, A., Deschamps, A., Peel, M., and Withers, P.J., Acta Mater., Vol 54, 2006, pp. 4793-4801.10.1016/j.actamat.2006.06.015 ↗
10. [10] Kamp, N., Reynolds, A.P., and Robson, J.D., Sci. Technol. Weld. Joining, Vol 14, no 7, 2009, pp. 589-596.10.1179/136217109X12538726589987 ↗
11. [11] Reynolds, A.P., Tang, W., Khandar, Z., Khan, J.A., and Lindner, K., Sci. Technol. Weld. Joining, Vol 10, No 2, 2005, pp. 190-199.10.1179/174329305X37024 ↗
12. [12] Upadhyay, P., and Reynolds, A.P., Mater. Sci. Eng. A, vol 527, n6, 2010, pp. 1537-1543.10.1016/j.msea.2009.10.039 ↗
13. Robson, J.D., Upadhyay, P., and Reynolds, A.P., Sci. Technol. Weld. Joining, vol 15, 2010, pp. 613-618.10.1179/136217110X12813393169651 ↗
14. [14] Kalemba, I, Hamilton, C, and Dymek, S, Mater. Des., Vol 60, 2014, pp. 295-301.10.1016/j.matdes.2014.04.009 ↗
15. [15] AP Reynolds, WD Lockwood, and TU Seidel, Mater. Sci. Forum, Vols 331-337, May 2000, pp. 1719-1724.10.4028/www.scientific.net/MSF.331-337.1719 ↗
16. [16] MW Mahoney, CG Rhodes, JG Flintoff, RA Spurling and WH Bingel, Metall. Mater. Trans. A, Vol 29A, 1998, pp. 1955-1964.10.1007/s11661-998-0021-5 ↗
17. M. Strangewood, J.E. Berry, D.P. Cleugh, A.J. Leonard, and P.L. Threadgill: Proc. 1 st Int. Symp. on ‘Friction stir welding’, Thousand Oaks CA, USA, June 1999, TWI.
18. [18] KV Jata, KK Sankaran, and JJ Ruschau, Metall. Mater. Trans. A, Vol 31A, 2000, pp. 2181-2192.10.1007/s11661-000-0136-9 ↗
19. [19] C Genevois, A Deschamps, A Denquin, and B Doisneaucottignies, Acta. Mater., Vol 53, 2005, pp. 2447-2458.10.1016/j.actamat.2005.02.007 ↗
20. [20] A Sullivan and JD Robson, Mater. Sci. Eng. A,, Vol A478, 2008, pp. 351-360.10.1016/j.msea.2007.06.025 ↗
21. [21] LE Svensson, L Karlsson, H Larsson, B Karlsson, M Fazzini, and J Karlsson, Sci. Techno. Weld. Join,, Vol 5 2000, pp. 285-296.10.1179/136217100101538335 ↗
22. [22] Buha, J., Lumley, R.N., and Crosky, A.G., Mater. Sci. Eng. A, Vol. 492, 2010, pp 1-10.10.1016/j.msea.2008.02.039 ↗
23. [23] Li, X., and Starink, M.J., Mater. Sci. Forum, Vol. 331-337, 2000, pp. 1071-76.10.4028/www.scientific.net/MSF.331-337.1071 ↗
24. Li X.M., and Starink M.J., J. Mater. Eng. Perform., vol 21, 2012, pp. 977-984.10.1007/s11665-011-9973-5 ↗
25. [25] Kamp, N., Sinclair, I., and Starink M.J., Metall. Mater. Trans. A, Vol 33A, April 2002, pp. 1125-1136.10.1007/s11661-002-0214-2 ↗
26. [27] Starink, M.J. and Wang, S.C., Acta Mater., Vol 51, 2003, pp 5131-515010.1016/S1359-6454(03)00363-X ↗
27. [28] Starink, M.J., Int. Mat. Rev., Vol 49, No. 3-4, 2004, pp. 191-226.10.1179/095066004225010532 ↗
28. [29] Dorward, R., Mater. Sci. Technol., vol 15, n 10, 1999, pp. 1133-1138.10.1179/026708399101505176 ↗
29. [30] Marlaud, T., Deschamps, A., Bley, F., Lefebvre, W., and Baroux, B, Acta Mater., Vol 58, 2010, pp. 248-260.10.1016/j.actamat.2009.09.003 ↗
30. [31] DeIasi, R. and Adler, P.N., Metalll. Trans. A, Vol 8A, n 7, July 1977, pp. 1177-1183.
31. [32] Adler, P.N. and DeIasi, R, Metalll. Trans. A, Vol 8A, July 1977, pp. 1185-1190.10.1007/BF02667404 ↗
32. [33] Park, J.K. and Ardell, A.J., Mater. Sci. Eng. A, Vol 114, 1989, pp. 197-203.10.1016/0921-5093(89)90859-9 ↗
33. [34] Tankins, E.S. and Frazier, W.E., Mater. Perform., vol 26, n 6, June 1987, pp. 37-44.
34. [35] Papazian, J.M., Metalll. Trans. A, vol. 13A, 5, May 1982, pp. 761-769.10.1007/BF02642389 ↗
35. [36] Wu, X.J., Koul, A.K., and Zhao, L., Can. Aeronaut. Space J., Vol 42, No. 2, June 1996, pp. 93-101.
36. Yamamoto A, Minami K, Ishihara U, and Tsubakino H, Mater. Trans. JIM, vol. 39, 1998, pp 69-74.10.2320/matertrans1989.39.69 ↗
37. [38] Papazian, J.M., Mater. Sci. Eng., vol. 79, No. 1, April 1986, pp. 97-104.10.1016/0025-5416(86)90391-5 ↗
38. [39] JE Hatch, Aluminum: Properties and Physical Metallurgy, American Society for Metals, Metals Park, OH, 1984, p. 31.
39. Aluminum Standards and Data 1990, 10th edition, the Aluminum Association, Washington, DC, 1990, pp. 41–42.
40. [41] Du, Z, Zhou T, Liu P, Li H, Dong B, and Chen C, J. Mater. Sci. Technol., Vol 21, 4, 2005, pp 479-483.
41. [46] Nicolas, M., and Deschamps, A., Mater. Sci. Forum, Vol 396-402, 2002, pp.1561-1566.10.4028/www.scientific.net/MSF.396-402.1561 ↗
42. [43] Nicolas, M., and Deschamps, A., Acta Mater., vol. 51, 2003, pp. 6077-6094.10.1016/S1359-6454(03)00429-4 ↗
43. [42] Marlaud, T., Deschamps, A., Bley, F., Lefebvre, W., Baroux, B., Acta Mater., Vol 48, 2010, pp. 4814-4826.10.1016/j.actamat.2010.05.017 ↗
44. [44] MA Salazar-Guapuriche, YY Zhao, A Pitman, and A Greene, Mater. Sci. Forum, Vols 519-521, 2006, pp. 853-858.10.4028/www.scientific.net/MSF.519-521.853 ↗
45. A.J. Leonard: Proc. 2nd Int. Symposium on ‘Friction stir welding’, Gothenburg, Sweden, June 2000.