journal article·2016-04

Development of Microstructural Damage in Ni-Based Alloys During Creep

Mitsuharu Yonemura, Hiroyuki Semba, Masaaki Igarashi

Publisher page

Abstract

Ni-based model alloys with a base composition of Ni-20 mass pct Cr-3 mass pct Mo that were precipitation strengthened by the γ′ phase were studied in regards to their failure mechanisms as part of the fundamental research for achieving a creep rupture strength of 100 MPa at 1023 K (750 °C) and 105 hours. The microstructure, which was interrupted by transient creep, as well as the minimum creep rate and accelerated creep at 1123 K (850 °C) and 80 MPa was observed. The microstructure around the grain boundaries was altered remarkably with strain-induced grain boundary migration, while the γ′ particle size increased linearly inside the grains with increasing temperature and time. Furthermore, the volume fraction of the γ′ phase and the amount of precipitation on the grain boundary were associated with the size of the precipitate-free zone (PFZ), which is a major factor in creep damage. The appropriate precipitations inside the grains and at the grain boundaries were very effective for suppressing PFZ. Consequently, the creep properties can be improved by controlling PFZ in the proximity of grain boundaries for a superior balance of creep strength and ductility.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. M. Yonemura, T. Hamaguchi, H. Semba, and M. Igarashi: First Symposium for Project on Fundamental Studies on Technology for Enhanced Strength and Functions, New energy and industrial technology development organization. 2009, pp. 77–78.
2. M. Doi: Prog. Mater. Sci., 1996, vol. 40, pp. 79.10.1016/0079-6425(96)00001-1 ↗
3. H. -A. Kuhn, H. Biermann, T. Ungár and H. Mughrabi: Acta metal. Mater, 1991, vol. 39, 2783-2794.10.1016/0956-7151(91)90095-I ↗
4. M. Enomoto and H. Harada: Metall. Trans. A, 1989, vol. 20A, pp. 649-664.10.1007/BF02667583 ↗
5. J. -C. Zhao, V. Ravkumar and A. M. Beltran: Meta. Mater. Trans., 2001, vol. 32A, pp. 1271-1282.10.1007/s11661-001-0217-4 ↗
6. T. M. Pollock and A. S. Argon: Acta Metall. Mater., 1994, vol. 42, 1859-1874.10.1016/0956-7151(94)90011-6 ↗
7. B. F. Dyson and T. B. Gibbons: Acta Metallurgica, 1987, vol. 35, pp. 2355-2369.10.1016/0001-6160(87)90083-6 ↗
8. Y. Tsukada, Y. Murata, T. Koyama, N. Miura and Y. Kondo: Acta Materialia, 2011, vol. 59, pp. 6378-6386.10.1016/j.actamat.2011.06.050 ↗
9. M. Yonemura, T. Hamaguchi, H. Semba, and M. Igarashi: 12th Inter. Conf. Creep and Fracture of Engineering Materials and Structures. 2012, pp. A45.
10. X. Xie, S. Zhao, and J. Dong: 5th Inter. Conf. Adv. in Materials Technology for Fossil Power Plants, Electric Power Research Institute. 2007, pp. 3A–6.
11. A. J. Ardell, R. B. Nicholson and J. D. Eshelby: Acta Metall., 1966, vol. 15, pp. 1295-1309.10.1016/0001-6160(66)90247-1 ↗
12. J. Z. Zhua, T. Wanga, A. J. Ardellb, S. H. Zhoua, Z. K. Liua and L. Q. Chena: Acta Mater., 2004, vol. 52, pp. 2837–2845.10.1016/j.actamat.2004.02.032 ↗
13. R. D. Doherty: Metal Science, 1982, vol. 16, pp. 1-14.10.1179/030634582790427019 ↗
14. M. Dahlén and L. Winberg, Acta Metallurgia, 1980, vol. 28, pp. 41-50.10.1016/0001-6160(80)90039-5 ↗
15. A. Porter, B. Ralph, J. Mat. Sci., 1981, vol. 16, pp. 707-713.10.1007/BF02402788 ↗
16. G. S. Was: Corrosion, 1990, vol. 46, pp. 319-330.10.5006/1.3585110 ↗
17. T. Ogura, S. Hirosawa and T. Sato: Materials Science Forum, 2007, vol. 561-565 pp. 235-238.10.4028/www.scientific.net/MSF.561-565.235 ↗
18. Y. L. Chiu and A. H. W. Ngan: Meta. Mater. Trans., 2000, vol. 31A, pp. 3179-3186.10.1007/s11661-000-0097-z ↗
19. L. Wang, G. Xie, J. Zhang and L. H. Lou, Scripta Materialia, 2006, vol. 55, pp. 457-460.10.1016/j.scriptamat.2006.05.013 ↗
20. T. Terada, T. Matsuo, and M. Kikuchi: in Aspects of High Temperature Deformation and Fracture, Y. Hosoi, ed., The Japan Institute of Metals and Materials, 1993, p. 27.
21. M. Yonemura, T. Hamaguchi, H. Semba and M. Igarashi: CAMP-ISIJ, 2008, vol. 21, pp. 1349.
22. T. B. Gibbons and B. E. Hopkins: Metal Science Journal, 1971, vol. 5, pp. 233.10.1179/030634571790439478 ↗