Neutron Stress Imaging of Drawn Copper Tube: Comparison with Finite-Element Model
Source abstract
Abstract
Seamless tubes are used for various mechanical applications, often produced by several cold drawing steps to reach the required dimensions. The first process step, for example, extrusion or rolling, typically results in ovality and eccentricity of the tube caused by nonsymmetric material flow and being present during the cold drawing process, i.e., no homogeneous deformation. Because of this nonsymmetrical deformation, and deviations over the length of the tube caused by moving tools, this process step generates inhomogeneous residual stresses. To understand the interconnection between geometrical changes in the tubes and the resulting residual stresses, the residual strain distribution in a copper tube was measured by neutron diffraction. The aim of this study is to evaluate residual stresses generated during cold drawing of copper tubes. This research comprises experimental measurements and numerical analysis. An industrially produced copper tube was cold drawn, and the profile of residual strain over circumference and across wall thickness was measured by neutron diffraction. In parallel, a three-dimensional finite-element model (FEM) was developed to calculate the residual macrostress state generated by the forming process. Good agreement between experimental results and numerical computations was obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. M. Jansson, L. Nilsson, K. Simonsson: J. Mater. Proc. Technol., 2007, vol. 190, pp. 1–1110.1016/j.jmatprotec.2007.02.050 ↗
2. “Seamless Precision Steel Tubes for Hydraulic Cylinders,” Report No. TN 008–00, Tenaris Industrial and Automotive Service, 2003, http://www.tenaris.com/shared/documents/files/CB34.pdf
3. Cole and Swallow: Information on http://www.coleandswallow.com (available in Mar. 2008)
4. Specialty Steels Product Reference Manual, Atlas Steel Products Co., Twinsburg, OH, 2000
5. Tectube Product Specification TI–001, KM Europa Metal AG, Osnabrück, Germany, 2003, www.kme.com/de/service/broschueren
6. K. Laue and H. Stenger: Strangpressen, Aluminium–Verlag Dusseldorf, 1976, ISBN 3-87017-103-0
7. R. Todd, D. Allen, and L. Alting: Manufacturing Processes Reference Guide, Industrial Press Inc., 1994, ISBN 0-8311-3049-0
8. H.-J. Gummert: Ziehen - über die Herstellung von Drähten, Stangen und Rohren, F&S Druck GmbH, Oldenburg, 2005, ISBN 3-00-016406-5
9. J. Gebhardt: Werkstoffuntersuchungen zum Ziehen von Rohren mit und ohne Innenwerkzeug, Dr.-Ing. Dissertation, Clausthal University of Technology, Clausthal-Zellerfeld, Germany, 1984
10. H.-J.Gummert: Ein Beitrag zur Untersuchung des Umformverhaltens von exzentrischen Rohren beim Kaltgleitziehen, Dr.-Ing. Dissertation, Clausthal University of Technology, Clausthal-Zellerfeld, Germany, 1991
11. E. Macherauch, H. Wohlfahrt, U. Wolfstieg: Härtereitechnische. Mitteilungen., 1973, vol. 28, p. 201
12. A. Carradò, D. Duriez, L. Barrallier, S. Brück, A. Fabre, U. Stuhr, T. Pirling, V. Klosek, H. Palkowski: Mater. Sci. Forum, 2008, vol. 21, pp. 571–72
13. H. Palkowski: Proposal for project AIF 13939, IMET, TU Clausthal, Clausthal-Zellerfeld, Germany, 2003
14. R.I. Stephens, A. Fatemi, R.R. Stephens, and H.O. Fuchs: Metal Fatigue in Engineering, 2nd ed., Wiley-Interscience, John Wiley & Sons, Inc., New York, 2001, ISBN 0-471-51059-9
15. C. Genzel, W. Reimers, R. Malek, K. Pöhlandt: Mater. Sci. Eng., 1996, vol. A205, pp. 79–9010.1016/0921-5093(95)10005-9 ↗
16. H. Palkowski and S. Brueck: Einfluss der Fertigungsparameter auf die Eigenspannungen und Maßtoleranzen beim Rohrziehen, Intermediate Report to Project AIF 13939, IMET, TU Clausthal, Clausthal-Zellerfeld, Germany, 2006
17. P.J. Boucharda, D. George, J.R. Santisteban, G. Bruno, M. Dutta, L. Edwards, E. Kingston, D.J. Smith: J. Pressure Vessel Technol., 2005, vol. 82, pp. 299–31010.1016/j.ijpvp.2004.08.008 ↗
18. T. Pirling, G. Bruno, and P.J. Withers: SALSA, Advances in Residual Stress Measurement at ILL Materials Science Forum, Trans Tech Publications Inc., Switzerland, 2006, vols. 524–525, pp. 217–22, ISSN: 0255-547610.4028/www.scientific.net/MSF.524-525.217 ↗
19. K. Stork: Vergleich des Umformverhaltens verschiedener kontinuierlich vergossener Kupferdrähte, Dr.-Ing. Dissertation, Clausthal University of Technology, Clausthal-Zellerfeld, Germany, 1998
20. P.J. Dreher: Metall, 1970, vol. 10, pp. 1068–73, ISSN 0026-0746
21. W. Dahl and H. Mühlenweg: Stahl u. Eisen, 1964, vol. 84, pp. 1250–60, ISSN 0340-4803
22. H. Bühler and P.-J. Kreher: Archiv für das Eisenhüttenwesen, 1968, pp. 353–59, ISSN 0003-896210.1002/srin.196803531 ↗
23. H. Palkowski and S. Brück: Metall, 2007, vol. 11, pp. 708–13, ISSN 0026-0746
24. P. Funke: Collection of flow curves, internal document, Clausthal University of Technology, until 1995