journal article·2012-12

In-Situ Reactive Synthesis of Si2N2O Ceramics and Its Properties

Shoujun Wu, Xiangming Li

Publisher page

Abstract

Si2N2O is considered as a new great potential structural/functional material in place of Si3N4 for high-temperature applications. In the present work, Si2N2O ceramics were in-situ reactive synthesized by a nitridizing powder mixture of Si and SiO2 using an optimized two-step sintering process according to thermodynamic analyses. The results showed that the purity of Si2N2O in the produced ceramics increased with an increase in final sintering temperature, while the shrinkage and Vickers hardness decreased. After final sintering above 1923 K (1650 °C), pure nanograined Si2N2O ceramics can be obtained. Flexural strength and fracture toughness both showed peak values at 1873 K (1600 °C). The reaction mechanism was proposed and then the difference of the produced ceramics was discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · MXene and MAX Phase Materials · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. M. Hillert, S. Jonsson, B. Sundman: Z. Metallkd., 1992, vol. 83, pp. 648–54.
2. P. Rocabois, C. Chatillon, and C. Bernard: J. Am. Ceram. Soc., 1996, vol. 79, pp. 1351–60.10.1111/j.1151-2916.1996.tb08596.x ↗
3. J.C. Bressiani, V. Izhevskyi, and H.A. Bressiani: Mater. Res., 1999, vol. 2, pp. 165–72.10.1590/S1516-14391999000300009 ↗
4. Y.C. Pei, S.Q. Li, C.Q. Yu, J.T. Ma, and J.L. Li: Ceram. Int., 2009, vol. 35, pp. 3365–69.10.1016/j.ceramint.2009.05.037 ↗
5. S.Q. Li, Y.C. Pei, C.Q. Yu, and J.L. Li: Ceram. Int., 2009, vol. 35, pp. 1851–54.10.1016/j.ceramint.2008.10.021 ↗
6. M. Ohashi, S. Kanzaki, and H. Tabata: J. Mater. Sci. Lett., 1988, vol. 7, pp. 339–40.10.1007/BF01730734 ↗
7. M. Ohashi, S. Kanzaki, and H. Tabata: J. Am. Ceram. Soc., 1991, vol. 74, pp. 109–14.10.1111/j.1151-2916.1991.tb07305.x ↗
8. Z.K. Huang, P. Greil, and G. Petzow: Ceram. Int., 1984, vol. 10, pp. 14–17.10.1016/0272-8842(84)90017-8 ↗
9. Q.F. Tong, J.Y. Wang, Z.P. Li, and Y.C. Zhou: J. Eur. Ceram. Soc., 2007, vol. 27, pp. 4767–72.10.1016/j.jeurceramsoc.2007.04.004 ↗
10. R. Marchand, Y. Laurent, J. Guyader, P. L’Haridon, and P. Verdier: J. Eur. Ceram. Soc., 1991, vol. 8, pp. 197–213.10.1016/0955-2219(91)90096-I ↗
11. M. Billy, P. Boch, C. Dumazeau, J.C. Glandus, and P. Goursat: Ceram. Int., 1981, vol. 7, pp. 13–18.10.1016/0272-8842(81)90033-X ↗
12. M. Mitomo, S. Ono, T. Asami, and S.J.L. Kang: Ceram. Int., 1989, vol. 15, pp. 345–50.10.1016/0272-8842(89)90047-3 ↗
13. N. Pradeilles, M.C. Record, and R.M. Marin-Ayral: J. Eur. Ceram. Soc., 2006, vol. 26, pp. 2489–95.10.1016/j.jeurceramsoc.2005.07.068 ↗
14. I. Barin and O. Knacke: Thermochemical Properties of Inorganic Substance, 2nd ed., O. Knacke, O. Kubaschewski, and K. Hesselmann, eds., Springer-Verlag, New York, NY, 1991.
15. R. Larker: J. Am. Ceram. Soc., 1992, vol. 75, pp. 62–66.10.1111/j.1151-2916.1992.tb05442.x ↗
16. American Society for Testing Materials: “Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials,” ASTM E399-74, ASTM, Philadelphia, PA, 1983, pp. 923–36.
17. X.M. Li, X.W. Yin, L.T. Zhang, L.F. Cheng, and Y.C. Qi: Mater. Sci. Eng. A., 2009, vol. 500, pp. 63–67.10.1016/j.msea.2008.09.066 ↗
18. C.M. Xu, S.W. Wang, X.X. Huang, J.K. Guo, and G.H. Zhou: J. Inorg. Mater., 2007, vol. 22, pp. 577–82.
19. D. Ashkin: J. Eur. Ceram. Soc., 1997, vol. 17, pp. 1613–24.10.1016/S0955-2219(97)00023-X ↗