Quantification of microsegregation during rapid solidification of Al-Cu powders
Source abstract
Abstract
A new technique is introduced to quantify microsegregation during rapid solidification. The quantification involves calculation of the average solute solubility in the primary phase during solidification of an Al-Cu binary alloy. The calculation is based on using volume percent eutectic and weight percent of second phase (in the eutectic), which were obtained experimentally. Neutron diffraction experiments and stereology calculation on scanning electron microscope images were done on impulse atomized Al-Cu alloys of three compositions (nominal), 5 wt pct Cu, 10 wt pct Cu, and 17 wt pct Cu, atomized under N-2 and He gas. Neutron diffraction experiments yielded weight percent CuAl2 data and stereology yielded volume percent eutectic data. These two data were first used to determine the weight percent eutectic. Using the weight percent eutectic and weight percent CuAl2 in mass and volume balance equations, the average solute solubility in the primary phase could be calculated. The experimental results of the amount of eutectic, tomography results from previous work, and results from the calculations suggest that the atomized droplets are in metastable state during the nucleation undercooling of the primary phase, and the effect of metastability propagates through to the eutectic formation stage. The metastable effect is more pronounced in alloys with higher solute composition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. A. Prasad, H. Henein, E. Maire, and Ch.-A. Gandin: Can. Metall. Q., 2004, vol. 43 (2), pp. 273–82.10.1179/cmq.2004.43.2.273 ↗
2. Y.J. Yao, N. Wang, and B. Wei: J. Mater. Sci. Lett., 2002, vol. 21, pp. 357–60.10.1023/A:1014942831170 ↗
3. C.D. Cao, W.J. Xie, and B. Wei: Mater. Sci. Eng. A, 2000, vol. 283A, pp. 86–93.10.1016/S0921-5093(99)00797-2 ↗
4. J.A. Sarreal and G.J. Abbaschian: Metall. Trans., 1986, vol. 17A, pp. 2063–73.10.1007/BF02645003 ↗
5. E. Scheil: Z. Metallk., 1954, vol. 236, pp. 843–52.
6. J.D. Hunt and K.A. Jackson: Trans. Metall. Soc. AIME, 1966, vol. 236, pp. 843–52.
7. M.N. Croker, R.S. Fidler, and R.W. Smith: Proc. Royal Soc. London, 1973, vol. 335 (1600), pp. 15–37.10.1098/rspa.1973.0111 ↗
8. K.S. Dubey and P. Ramachandrarao: Scripta Metall., 1992, vol. 26, pp. 709–10.10.1016/0956-716X(92)90424-D ↗
9. B. Cantor and G.A. Chadwick: J. Cryst. Growth, 1974, vol. 23, pp. 12–20.10.1016/0022-0248(74)90035-9 ↗
10. B. Cantor and G.A. Chadwick: J. Cryst. Growth, 1974, vol. 30, pp. 101–08.10.1016/0022-0248(75)90207-9 ↗
11. R. Hamar and C. Lemaignan: J. Cryst. Growth, 1981, vol. 53, pp. 586–90.10.1016/0022-0248(81)90143-3 ↗
12. L.F. Mondolfo: J. Austral. Instit. Metals, 1965, vol. 10 (2), pp. 169–77.
13. L.C. Morin, M. Reider, J. Meja, and H. Henein: International Symposium of Light Metals, Met. Soc. of CIM, 1996, pp. 293–304.
14. H. Henein: Mater. Sci. Eng. A, 2001, vol. 326 (1), pp. 92–100.10.1016/S0921-5093(01)01429-0 ↗
15. Standard Test Methods for Metal Powders and Powder Metallurgy Products, Metal Powder Industries Federation, 1992.
16. R.T. DeHoff and F. Rhines: Quantitative Microscopy, 1968, 1st ed., McGraw-Hill Book Company, New York, NY.
17. C.V. Howard and M.G. Reed: Unbiased Stereology: 3-Dimensional Measurement in Microscopy, 1998, BIOS Scientific Publishers Ltd., Oxford, U.K.
18. J.B. Wiskel, K. Navel, H. Henein, and E. Marie: Can. Metall. Q., 2002, vol. 41 (2), pp. 193–204.10.1179/cmq.2002.41.2.193 ↗
19. O. Ott and W. Mendenhall: Understanding Statistics, 1985, Duxbury Press, PWS-Kent Publishing Company, Boston, MA.
20. G.E. Bacon: X-Ray and Neutron Diffraction, 1966, Pergamon Press, London, U.K.
21. R.B. Von Dreele: Neutron Diffraction in Materials Science and Technology: A Comprehensive Treatment, vol. 2B, Wiley-VCH, New York, NY.
22. R.A. Young: The Rietveld Method, 2000, Oxford University Press, Chester, U.K.
23. K. Takeshita and H. Shingu: Trans. Jpn. Instit. Metals, 1986, vol. 27 (3), pp. 180–86.10.2320/matertrans1960.27.180 ↗
24. J.C. Baker and J.W. Cahn: Solidification, 1971, American Society for Metals, pp. 23–56, Metals Park, OH.
25. C.J. Smithells: Metals Reference Book, 1976, Butterworths, Oxford, U.K.
26. K.T. Conlon, E. Maire, D.S. Wilkinson, and H. Henein: Metall. Mater. Trans., 2000, vol. 31A, pp. 249–60.10.1007/s11661-000-0069-3 ↗
27. R. Heringer: Ph.D. Thesis, 2004, Institut National Polytechnique de Lorraine, Nancy.
28. J. Lipton, W. Kurz, and R. Trivedi: Acta Metall., 1987, vol. 35 (4), pp. 957–64.10.1016/0001-6160(87)90174-X ↗