In Situ Observation of Strain Evolution in Cp-Ti Over Multiple Length Scales
Source abstract
Abstract
The strain evolution in polycrystalline CP-Ti strip under tension was studied in situ and at two length scales using Synchrotron X-ray diffraction. To establish the bulk material behavior, experiments were performed at the Australian Synchrotron facility. Because of the relatively large grain size, discontinuous “spotty” Debye ring patterns were observed, and a peak fitting algorithm was developed to determine the individual spot positions with the necessary precision for strain determination. The crystallographic directional dependence of strain anisotropy during the loading cycle was determined. Strain anisotropy and yielding of individual crystallographic planes prior to the macroscopic yield point were further clarified by in situ loading experiments performed at the Advanced Light Source (ALS). The deviatoric strain accumulation and plastic response were mapped on a grain-by-grain basis. The onset of microscopic yielding in the grains was identified and correlated with the relative orientation of the grains with respect to the loading direction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Y.B. Chun, S.H. Yu, S.L. Semiatin, and S.K. Hwang: Mater. Sci. Eng. A, 2005, vol. 398, nos. 1-2, pp. 209-19.10.1016/j.msea.2005.03.019 ↗
2. Y. Liu and X. Wu: Metall. Mater. Trans A, 2006, vol. 37A, pp. 7–17.10.1007/s11661-006-0147-2 ↗
3. F.J. Humphreys, Y. Huang, I. Brough, and C. Harris: J. Micros., 1999, vol. 195, no. 3, pp. 212-16.10.1046/j.1365-2818.1999.00579.x ↗
4. R. Quey, D. Piot, and J.H. Driver: Acta Mater., 2010, vol. 58, pp. 1629-42.10.1016/j.actamat.2009.11.007 ↗
5. C.C. Merriman, D.P. Field, and P. Trivedi: Mater. Sci. Eng. A, 2008, vol. 494, pp. 28-35.10.1016/j.msea.2007.10.090 ↗
6. M.A. Gibson and C.T. Forwood: Philos. Mag. A, 2000, vol. 80, no. 12, pp. 2747-83.10.1080/01418610008223894 ↗
7. J.V. Bernier, J.-S. Park, A.L. Pilchak, M.G. Glavicic, and M.P. Miller: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 3120-33.10.1007/s11661-008-9639-6 ↗
8. S.L. Raghunathan, A.N. Stapleton, R.J. Dashwood, M. Jackson, and D. Dye: Acta Mater., 2007, vol. 55, pp. 6861-72.10.1016/j.actamat.2007.08.049 ↗
9. M.R. Daymond and N.W. Bonner: Mater. Sci. Eng. A, 2003, vol. 340, pp. 272-80.10.1016/S0921-5093(02)00183-1 ↗
10. J.-S. Chung and G.E. Ice: J. Appl. Phys., 1999, vol. 86, pp. 5249-55.10.1063/1.371507 ↗
11. B.C. Larson, W. Yang, G.E. Ice, J.D. Budai, and J.Z. Tischler: Nature, 2002, vol. 415, pp. 887-90.10.1038/415887a ↗
12. E.M. Lauridsen, D.J. Jenson, H.F. Poulsen, and U. Lienert: Scripta Mater., 2000, vol. 43, pp. 561-66.10.1016/S1359-6462(00)00430-9 ↗
13. L. Marguiles, G. Winther, and H.F. Poulsen: Science, 2000, 291, pp. 2393-94.
14. U. Lienert, T.S. Han, J. Almer, P.R. Dawson, T. Leffers, L. Margulies, S.F. Nielsen, H.F. Poulsen, and S. Schmidt: Acta Mater., 2004, vol. 52, pp. 4461-67.10.1016/j.actamat.2004.05.051 ↗
15. B. Jakobsen, H.F. Poulsen, U. Lienert, and W. Pantleon: Acta Mater., 2007, vol. 55, pp. 3421-30.10.1016/j.actamat.2007.01.049 ↗
16. R. Barabash, G.E. Ice, and J.W.L. Pang: Mater. Sci. Eng. A, 2005, vol. 400-401, pp. 125-31.10.1016/j.msea.2005.03.036 ↗
17. N. Bozzolo, N. Dewobroto, H.R. Wenk, and F. Wagner: J. Mater. Sci., 2007, vol. 42, pp. 2405-16.10.1007/s10853-006-1302-2 ↗
18. M.J. Philippe, M. Serghat, P. van Houtte, and C. Esling: Acta Metall. Mater., 1995, vol. 43, no. 4, pp. 1619-30.10.1016/0956-7151(94)00329-G ↗
19. P.A. Lynch, A.W. Stevenson, D. Liang, D. Parry, S. Wilkins, I.C. Madsen, C.J. Bettles, N. Tamura, and G. Geandier: Amer. Inst. Phys., 2007, pp. 1751–54.10.1063/1.2436407 ↗
20. N. Tamura: XMAS, X-Ray Microdiffraction Analysis Software, http://xraysweb.lbl.gov/microdif/XMAS/.
21. S. Wolfram: The Mathematica Book, 3rd ed., Wolfram Media/Cambridge University Press, Champaign, IL,1996.
22. Bruker Pty Ltd.: Topas V1.0: Profile Fitting Using an Analytical as Well as Fundamental Parameters Approach, 1998.
23. N. Tamura, A.A. MacDowell, R. Spolenak, B.C. Valek, J.C. Bravman, W.L. Brown, R.S. Celestre, H.A. Padmore, B.W. Batterman, and J.R. Patel: J. Syn. Rad., 2003, vol.10, pp. 137-43.10.1107/S0909049502021362 ↗
24. H. Neerfield and K.W.I. Mitt: EisenForsch., 1942, vol. 24, pp. 61-70.
25. R. Hill: Proc. Phys. Soc., 1952, vol. A65, pp. 349-54.10.1088/0370-1298/65/5/307 ↗
26. P.A. Lynch, D. Tomus, C.J. Bettles, M.A. Gibson, and A.W. Stevenson: Nucl. Instrum. Meth., 2009, in press.
27. G.Z. Sachs: Verein. Deut. Ing., 1928, vol. 72, p. 7343.
28. H.F. Poulsen, L. Marguiles, S. Schmidt, and G. Winther: Acta Mater., 2003, vol. 51, pp. 3821-30.10.1016/S1359-6454(03)00206-4 ↗
29. T.R. Bieler, M.A. Crimp, Y. Yang, L. Wang, P. Eisenlohr, D.E. Mason, W. Liu, and G.E. Ice: J. Mater., 2009, vol. 61, no. 12, pp. 45-52.
30. R.V. Martins, L. Marguiles, S. Schmidt, H.F. Poulsen, and T. Leffers: Mater. Sci. Eng. A, 2004, vols. 387–389, pp. 84–88.10.1016/j.msea.2004.02.069 ↗
31. B.C. Valek: Ph.D. Dissertation, Stanford University, Palo Alto, CA, 2003.
32. P.A. Lynch and A.W. Stevenson: unpublished research.
33. R. Barabash, G.E. Ice, B.C. Larson, G.M. Pharr, K.-S. Chung, and W. Yang: Appl. Phys. Lett., 2001, vol. 79, no. 6, pp. 749-51.10.1063/1.1389321 ↗