SDAS, Si and Cu Content, and the Size of Intermetallics in Al-Si-Cu-Mg-Fe Alloys
Source abstract
Abstract
Plates of Al-(a)Si-(b)Cu-Mg-(c)Fe alloys with varying content of (mass pct) Si (a = 3, 4.5, 7.5, 9, 10, or 11), Cu (b = 0, 1, or 4), and Fe (c = 0.2, 0.5 or 0.8) were cast in sand molds with a heavy chill at one end to ensure quasi-directional solidification over a wide range of Secondary Dendrite Arm Spacing (SDAS). Statistical analysis on the size of the β-Al5FeSi, α-Al8Fe2Si, or Al2Cu intermetallics on Backscattered Electron images showed that a high Si content reduced the size of the β platelets in alloys with up to 0.5 Fe content regardless of the SDAS, whereas at small SDAS the refining effect extended up to 0.8 Fe, and involved α-phase intermetallics which replaced the beta platelets at those concentrations. At low Si contents, a high Cu level appeared to have similar refining effects as increased Si, through the formation of α-phase particles in the post-eutectic stage which agglomerated with the Al2Cu intermetallics. A high content of Si appears to make the overall refining process less critical in terms of SDAS/cooling rate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. [1]C.H. Caceres, I.L. Svensson, and J.A. Taylor: Int. J. Cast Met. Res. 2003, vol. 15, pp. 531–43,10.1080/13640461.2003.11819539 ↗
2. C.H. Caceres and J.A. Taylor: Shaping Casting: The John Campbell Symposium, 2005, vol. 1, pp. 245–54.
3. C.H. Caceres and J.A. Taylor: Metall. Mater. Trans. B 2006, vol. 37B, pp. 897–903.10.1007/BF02735011 ↗
4. C.H. Caceres, B. Johannesson, J.A. Taylor, A. Canales-Nunez, M. Cardoso, and J. Talamantes: The effect of si content on the size and morphology of Fe-rich and Cu-rich intermetallics in Al-Si-Cu-Mg alloys (Minerals, Metals & Materials Soc, Warrendale, PA, 2007).
5. T. Sivarupan, C.H. Caceres, and J.A. Taylor: in 5th Shape Casting Symposium TMS 2014, M. Tiryakioglu, J. Campbell, and G.E. Byczynski, eds., Wiley, New York, 2014, pp. 137–43.
6. T. Sivarupan, C.H. Caceres, and J.A. Taylor: Materials Science Forum 2013, Light Metals Technology, vol. 765, Trans Tech Publications, Switzerland, 2013, p. 107.10.4028/www.scientific.net/MSF.765.107 ↗
7. O. Vorren, J.E. Evensen, and T.B. Pedersen: Trans. Am. Foundrymen’s Soc., vol. 92, 1984, pp. 459–66.
8. A. Gorny, J. Manickaraj, Z. Cai, and S. Shankar: J. Alloys Compd. 2013, vol. 577, pp. 103-124.10.1016/j.jallcom.2013.04.139 ↗
9. W. Khalifa, F. Samuel, and J. Gruzleski: Metallurgical and Materials Transactions A 2003, vol. 34, pp. 807-825.10.1007/s11661-003-1009-9 ↗
10. M.H. Mulazimoglu, A. Zaluska, J.E. Gruzleski, and F. Paray: Metall. Mater. Trans. A 1996, vol. 27, pp. 929–36.10.1007/BF02649760 ↗
11. S. Lee, B. Kim, and S. Lee: Mater. Trans. 2011, vol. 52, pp. 1053–62.10.2320/matertrans.M2010422 ↗
12. T. Sivarupan, C.H. Caceres, and J.A. Taylor: Metall. Mater. Trans. A 2013, vol. 44A, pp. 4071–80.10.1007/s11661-013-1768-x ↗
13. K. Kanaya and S. Okayama: J. Phys. D 1972, vol. 5, pp. 43-58.10.1088/0022-3727/5/1/308 ↗
14. M. Kaczorowski and W.W. Gerberich: Mater. Lett. 1986, vol. 4, pp. 244-48.10.1016/0167-577X(86)90016-9 ↗
15. F.J. Humphreys, P.J. Goodhew, and R. Beanland: Electron microscopy and analysis (Taylor & Francis, New York, 2001).
16. R.N. Corby and P.J. Black: Acta Crystallogr. Sect. B 1977, vol. 33, pp. 3468–75.10.1107/S0567740877011224 ↗
17. V. Hansen, B. Hauback, M. Sundberg, C. Romming, and J. Gjonnes: Acta Crystallogr. Sect. B 1998, vol. 54, pp. 351–57.10.1107/S0108768197017047 ↗
18. A. Couture: Int. Cast Met. J. 1981, vol. 6, pp. 9-17,
19. P.N. Crepeau: Trans. Am. Foundrymen’s Soc., vol. 103, 1995, pp. 361–66.
20. J.A. Taylor: Proc. Mater. Sci. 2012, vol. 1, pp. 19-33.10.1016/j.mspro.2012.06.004 ↗
21. Y. Awano and Y. Shimizu: Trans. Am. Foundrymen’s Soc. 1990, vol. 98, pp. 889–95
22. Y.H. Cho, H.C. Lee, K.H. Oh, and A.K. Dahle: Metall. Mater. Trans. A 2008, vol. 39A, pp. 2435-48.10.1007/s11661-008-9580-8 ↗
23. L. Bäckerud, G. Chai, and J. Tamminen: Solidification Characteristics of Aluminum Alloys, AFS/Skanaluminium Publications, Des Plaines, IL, 1990.
24. C.M. Dinnis, J.A. Taylor, and A.K. Dahle: Materials Forum 28, 2004, vol. 28, pp. 1016–21.
25. [25]C.M. Dinnis, J.A. Taylor, and A.K. Dahle: Scripta Materialia 2005, vol. 53, pp. 955–58.10.1016/j.scriptamat.2005.06.028 ↗
26. X.J. Cao and J. Campbell: Mater. Trans. 2006, vol. 47, pp. 1303–12.10.2320/matertrans.47.1303 ↗
27. A.M. Samuel, F.H. Samuel, and H.W. Doty: J. Mater. Sci. 1996, vol. 31, pp. 5529–39.10.1007/BF01159327 ↗
28. L. Liu, A.M.A. Mohamed, F.H. Samuel, A.M. Samuel, H.W. Doty, and S. Valtierra: Metall. Mater. Trans. A 2009, vol. 40A, pp. 2457–69.10.1007/s11661-009-9944-8 ↗
29. A. Day and P. Trimby: User Manual-Chanel 5, HKL Technology 2001, vol. 1, p. 104. http://caf.ua.edu/wp-content/uploads/docs/JEOL-7000F-Oxford_Channel_5_User_Manual.pdf.