Presintering effects on ground-based and microgravity liquid phase sintering
Source abstract
Abstract
Tungsten heavy alloys are an ideal system for liquid phase sintering studies. The sintering behavior and postsintering microstructure depend to a large degree on the processing conditions. While grain growth, final microstructures, and mechanical properties are fairly well understood, the role of presintering conditions is poorly documented. This article discusses presintering condition effects on the subsequent liquid phase sintering densification and distortion during both ground-based and microgravity sintering. It provides unique insight into the events accompanying densification and shape distortion, such as solid-liquid segregation and pore stability. Solid-liquid segregation is closely connected to densification. Presintering conditions play an important role in the mobility and the location of the pores in the sample, which can be explained in terms of the interfacial energy between different phases. In ground-based sintering, the cold-isostatically pressed sample has the most uniform solid-liquid distribution with the largest shrinkage. In microgravity sintering, the vacuum-presintered sample shows the largest degree of densification and elimination of pores.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. P. Lu, X. Xu, W. Yi, and R.M. German: Mater. Sci. Eng., in press.
2. J. Liu and R.M. German: Metall. Trans. A, 1999, vol. 30A, pp. 3211–17.10.1007/s11661-999-0231-5 ↗
3. C.M. Kipphut, R.M. German, A. Bose, and T. Kishi: in Advances in Powder Metallurgy, Metal Powder Industries Federation, Princeton, NJ, 1989, vol. 2, pp. 415–29.
4. J.L. Johnson, A. Upadhyaya, and R.M. German: in Advances in Powder Metallurgy and Particulate Materials, M. Philips and J. Porter, eds., Metal Powder Industries Federation, Princeton, NJ, 1995, vol. 1, pp. 4.219–4.228.
5. J.L. Johnson, A. Upadhyaya, and R.M. German: Metall. Mater. Trans. B, 1998, vol. 29B, pp. 857–66.10.1007/s11663-998-0145-4 ↗
6. C.M. Kipphut, A. Bose, S. Farooq, and R.M. German: Metall. Mater. Trans. A, 1988, vol. 19A, pp. 1905–13.10.1007/BF02645192 ↗
7. J. Liu, A. Upadhyaya, and R.M. German: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2209–20.10.1007/s11661-999-0033-9 ↗
8. J.L. Johnson and R.M. German: Metall. Trans. A, 1993, vol. 24A, pp. 2369–77.10.1007/BF02646516 ↗
9. S. Kohara and T. Ohira: 1993 Powder Metallurgy World Congr. Proc., Y. Bando and K. Kosuge, eds., Japan Society of Powder and Powder Metallurgy, Kyota, Japan, 1993, Part 2, pp. 909–12.
10. S. Kohara and M. Hoshino: in Advances in Powder Metallurgy and Particulate Materials—1994, C. Hall and A.J. Neupaver, eds., Metal Powder Industries Federation, Princeton, NJ, 1994, vol. 3, pp. 295–302.
11. P. Lu and R.M. German: J. Mater. Sci., 2001, vol. 36, pp. 000–00.
12. R.M. German and K.S. Churn: Metall. Trans. A, 1984, vol. 15A, pp. 747–54.10.1007/BF02644206 ↗
13. K.S. Churn and D.N. Yoon: Powder Metall., 1979, vol. 22, pp. 175–78.10.1179/pom.1979.22.4.175 ↗
14. R.M. German, A. Bose, and S.S. Mani: Metall. Trans. A, 1992, vol. 23A, pp. 211–19.10.1007/BF02660866 ↗
15. A. Bose and R.M. German: Metall. Trans. A, 1988, vol. 19A, pp. 2467–76.10.1007/BF02645474 ↗
16. L.B. Ekbom and A. Eliassom: in Tungsten and Tungsten Alloys—1992, A. Bose and R.J. Dowding, eds., Metal Powder Industries Federation, Princeton, NJ, 1993, pp. 97–110.
17. Z. Xue, J.G. Vandegrift, and J.E. Smith, Jr.: Microgr. Sci. Technol., 1995, vol. 8, pp. 112–17.
18. Z. Xue, S.L. Noojin, J.G. Vandegrift, A.K. Kuruvilla, and J.E. Smith, Jr.: Mater. Trans. JIM, 1996, vol. 37, pp. 1084–90.10.2320/matertrans1989.37.1084 ↗
19. I. Seyhan, L. Ratke, W. Bender, and P.W. Voorhees: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2470–78.10.1007/BF02652341 ↗
20. R.M. German: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 279–88.10.1007/BF02664666 ↗
21. R.M. German: Metall. Mater. Trans. B, 1995, vol. 26B, pp. 649–50.10.1007/BF02653886 ↗
22. R.G. Iacocca, Y. Liu, and R.M. German: in Advances in Powder Metallurgy and Particulate Materials, M. Phillips and J. Porter, eds., Metal Powder Industries Federation, Princeton, NJ, 1995, vol. 1, pp. 4.239–4.249.
23. Y. Liu, R.G. Iacocca, J.L. Johnson, R.M. German, and S. Kohara: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2484–86.10.1007/BF02671264 ↗
24. R.M. German, R.G. Iacocca, J.L. Johnson, Y. Liu, and A. Upadhyaya: J. Met., 1995, vol. 47, pp. 46–48.
25. R.M. German and Y. Liu: J. Mater. Synth. Processing, 1996, vol. 4, pp. 23–24.
26. A. Upadhyaya and R.M. German: in Advances in Powder Metallurgy and Particulate Materials—1998, J.J. Oakes and J.H. Reinshagen, eds., Metal Powder Industries Federation, Princeton, NJ, 1998, pp. 3.11–3.17.
27. E.A. Olevsky and R.M. German: in Advances in Powder Metallurgy & Particulate Materials, C.L. Rose and M.H. Thibodeau, eds., Metal Powder Industries Federation, Princeton, NJ, 1999, pp. 3-107–3-114.
28. R.M. German, Y. Liu, and A. Griffo: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 215–21.10.1007/s11661-997-0098-2 ↗
29. X. Xu, A. Upadhyaya, R.M. German, and R.G. Iacocca: Int. J. Refract. Met. Hard Mater., 1999, vol. 17, pp. 369–79.10.1016/S0263-4368(99)00026-8 ↗
30. A.J. Markworth: Scripta Metall., 1972, vol. 6, pp. 957–60.10.1016/0036-9748(72)90153-6 ↗
31. A. Bose and R.M. German: in Sintering Technology, R.M. German, G.L. Messing, and R.G. Cornwell, eds., Marcel Dekker, Inc., New York, NY, 1996, pp. 269–76.
32. T. Murata and S. Sakamoto: Nitrogen-Alloyed Steels, Agne Publishing Inc., 1997, pp. 7–18.
33. C. Greskovich: J. Am. Ceram. Soc., 1981, vol. 64, pp. 725–30.10.1111/j.1151-2916.1981.tb15895.x ↗
34. U.-C. Oh, Y.-S. Chung, D.-Y. Kim, and D.N. Yoon: J. Am. Ceram. Soc., 1988, vol. 71, pp. 854–57.10.1111/j.1151-2916.1988.tb07535.x ↗
35. W. Beere: Acta Metall., 1975, vol. 23, pp. 131–38.10.1016/0001-6160(75)90078-4 ↗