Three-Dimensional (3-D) Atom Probe Tomography of a Cu-Precipitation-Strengthened, Ultrahigh-Strength Carburized Steel
Source abstract
Abstract
In an effort to reduce material cost, experimental steel alloys were developed that incorporated Cu precipitation in lieu of costly Co alloying additions in secondary hardening carburizing gear steels. This work utilizes three-dimensional atom probe tomography to study one of these prototype alloys and quantify the nanoscale dispersions of body-centered cubic (bcc) Cu and M2C alloy carbides used to strengthen these steels. The temporal evolution of precipitate, size, morphology, and interprecipitate interactions were studied for various tempering times. Findings suggest that Cu precipitation does act as a catalyst for heterogeneous nucleation of M2C carbides at relatively high hardness levels; however, the resultant volume fraction of strengthening carbides was noticeably less than that predicted by thermodynamic equilibrium calculations, indicating a reduced potency compared with Co-assisted precipitation. Microstructural information such as precipitate size and volume fraction was measured at the peak hardness condition and successfully used to recalibrate alloy design models for subsequent alloy design iterations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. B.L. Tiemens, A.K. Sachdev, and G.B. Olson: Metall. Mater. Trans. A 2012. doi:10.1007/s11661-012-1176-7.10.1007/s11661-012-1176-7 ↗
2. K.C. Russell and L.M. Brown: Acta Metall., 1972, vol. 20, pp. 969–74.10.1016/0001-6160(72)90091-0 ↗
3. G.M. Worrall, J.T. Buswell, C.A. English, M.G. Hetherington, and G.D.W. Smith: J. Nucl. Mater., 1987, vol. 148, pp. 107–14.10.1016/0022-3115(87)90525-3 ↗
4. P.J. Othen, M.L. Jenkins, G.D.W. Smith, and W.J. Phythian: Phil. Mag. Lett., 1991, vol. 64, pp. 383–91.10.1080/09500839108215121 ↗
5. N. Maruyama, M. Sugiyama, T. Hara, and H. Tamehiro: Mater. Trans. JIM, 1999, vol. 40, pp. 268–77.10.2320/matertrans1989.40.268 ↗
6. G.R. Speich and R.A. Oriani: Trans. TMS-AIME, 1965, vol. 233, pp. 623–31.
7. A. Saha: Systems Design of Transformation Toughened Blast-Resistant Naval Hull Steels, Northwestern University, Evanston, IL, 2004.
8. A. Takahashi and M. Iino: ISIJ Int., 1996, vol. 36, pp. 241–45.10.2355/isijinternational.36.241 ↗
9. M. Mujahid, A.K. Lis, C.I. Garcia, and A.J. DeArdo: J. Mater. Eng. Perform., 1998, vol. 7, pp. 247–57.10.1361/105994998770347981 ↗
10. G.C. Hwang, S. Lee, J.Y. Yoo, and W.Y. Choo: Mater. Sci. Eng. A - Struct., 1998, vol. 252, pp. 256–68.10.1016/S0921-5093(98)00670-4 ↗
11. B.S. Ku and J. Yu: Scripta Mater., 2001, vol. 45, pp. 205–11.10.1016/S1359-6462(01)01019-3 ↗
12. M. Hattestrand and H.O. Andren: Mater. Sci. Eng. A - Struct., 2001, vol. 318, pp. 94–101.10.1016/S0921-5093(01)01304-1 ↗
13. K. Stiller, M. Hattestrand, and F. Danoix: Acta Mater., 1998, vol. 46, pp. 6063–73.10.1016/S1359-6454(98)00267-5 ↗
14. K. Hono, D.H. Ping, M. Ohnuma, and H. Onodera: Acta Mater., 1999, vol. 47, pp. 997–1006.10.1016/S1359-6454(98)00392-9 ↗
15. T. Ohkubo, H. Kai, D.H. Ping, K. Hono, and Y. Hirotsu: Scripta Mater., 2001, vol. 44, pp. 971–76.10.1016/S1359-6462(00)00689-8 ↗
16. L.A. Giannuzzi, J.L. Drown, S.R. Brown, R.B. Irwin, and F. Stevie: Micro. Res. Tech., 1998, vol. 41, pp. 285–90.10.1002/(SICI)1097-0029(19980515)41:4<285::AID-JEMT1>3.0.CO;2-Q ↗
17. M.K. Miller: Atom Probe Tomography: Analysis at the Atomic Level, Kluwer Academic/Plenum Publishers, New York, NY, 2000.10.1007/978-1-4615-4281-0 ↗
18. S.R. Goodman, S.S. Brenner, and J.R. Low: Metall. Trans., 1973, vol. 4, pp. 2363–69.10.1007/BF02669376 ↗
19. H.M. Lee and S.M. Allen: Metall. Trans. A, 1991, vol. 22A, pp. 2877–88.10.1007/BF02650249 ↗
20. J.F. Nie and B.C. Muddle: Mater. Sci. Eng. A, 2001, vol. 319, pp. 448–51.10.1016/S0921-5093(01)01054-1 ↗
21. J.F. Nie: Scripta Mater., 2003, vol. 48, pp. 1009–15.10.1016/S1359-6462(02)00497-9 ↗