Strain Energy During Mechanical Milling: Part I. Mathematical Modeling
Source abstract
Abstract
In this study, we formulate a mathematical model that can be implemented to calculate the amount of strain energy both introduced to (Ui) and stored in (Us) metal powders during mechanical milling. The theoretical analysis presented in this study proposes that the strain energy is primarily induced by normal and shear strains, and moreover, that the contributions from torsion can be neglected. This theoretical framework was implemented to evaluate the influence of various mechanical milling processing parameters on Ui and Us. The calculated results show that the magnitude of Ui increases with increases in the following processing parameters: attritor diameter, impeller’s rotational frequency, and ball-to-powder mass ratio, and the magnitude of Ui increases with a decrease in diameter of the milling media. The percentage of the shear strains’ contribution to the total Ui is insensitive to the mechanical milling processing parameters, varying within the range of 35 pct to 42 pct. The calculated magnitude of Us ranges from a few to a few tens of joules per gram, which is three to four orders of magnitude lower than that of the calculated Ui. Although with respect to the mechanical milling processing parameters, the calculated Us has trends similar to those for Ui, the changing rates of Us are much lower than those for Ui.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. V.M. Segal: Mater. Sci. Eng. A, 1995, vol. 197, pp. 157–64.10.1016/0921-5093(95)09705-8 ↗
2. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Progr. Mater. Sci., 2000, vol. 45, pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
3. Y. Saito, H. Utsunomiya, N. Tsuji, and T. Sakai: Acta Mater., 1999, vol. 47, pp. 579–83.10.1016/S1359-6454(98)00365-6 ↗
4. T. Sakai, A. Belyakov, and H. Miura: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2206–14.10.1007/s11661-008-9556-8 ↗
5. C.C. Koch: Nanostructured Mater., 1997, vol. 9, pp. 13–22.10.1016/S0965-9773(97)00014-7 ↗
6. H. Fecht, E. Hellstern, Z. Fu, and W.L. Johnson: Metall. Trans. A, 1990, vol. 21A, pp. 2333–37.10.1007/BF02646980 ↗
7. L. Lu and M.O. Lai: Mechanical Alloying, Kluwer Academic Publishers, Norwell, MA, 1998.10.1007/978-1-4615-5509-4_9 ↗
8. C. Suryanarayana: Progr. Mater. Sci., 2001, vol. 46, pp. 1–184.10.1016/S0079-6425(99)00010-9 ↗
9. J. Eckert, J.C. Holzer, C.E. Krill III, and W.L. Johnson: J. Mater. Res., 1992, vol. 7, pp. 1751–61.10.1557/JMR.1992.1751 ↗
10. D.L. Zhang: Progr. Mater. Sci., 2004, vol. 49, pp. 537–60.10.1016/S0079-6425(03)00034-3 ↗
11. M. Magini and A. Iasonna: Mater. Trans. JIM, 1995, vol. 36, pp. 123–33.10.2320/matertrans1989.36.123 ↗
12. A. Iasonna and M. Magini: Acta Mater., 1996, vol. 44, pp. 1109–17.10.1016/1359-6454(95)00226-X ↗
13. M. Magini, A. Iasonna, and F. Padella: Scripta. Mater., 1996, vol. 34, pp. 13–19.10.1016/1359-6462(95)00465-3 ↗
14. D. Maurice and T.H. Courtney: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1973–79.10.1007/BF02651946 ↗
15. B. Aikin and T.H. Courtney: Metall. Trans. A, 1993, vol. 24A, pp. 2465–71.10.1007/BF02646525 ↗
16. M. Abdellaoui and E. Gaffet: Acta Mater., 1996, vol. 44, pp. 725–34.10.1016/1359-6454(95)00177-8 ↗
17. M. Abdellaoui and E. Gaffet: Acta Metall. Mater., 1995, vol. 43, pp. 1087–98.10.1016/0956-7151(95)92625-7 ↗
18. R. Watanabe, H. Hashimoto, and G.G. Lee: Mater. Trans. JIM, 1995, vol. 36, pp. 102–09.10.2320/matertrans1989.36.102 ↗
19. E.V. Shelekhov, V.V. Tcherdyntsev, L.Y. Pustov, S.D. Kaloshkin, and I.A. Tomilin: Mater. Sci. Forum, 2000, vols. 343–343, pp. 603–08.10.4028/www.scientific.net/MSF.343-346.603 ↗
20. P. Le Brun, L. Froyen, and L. Delaey: Mater. Sci. Eng. A, 1993, vol. 161, pp. 75–82.10.1016/0921-5093(93)90477-V ↗
21. M.P. Dallimore and P.G. McCormick: Mater. Trans. JIM, 1996, vol. 37, pp. 1091–98.10.2320/matertrans1989.37.1091 ↗
22. D.R. Maurice and T.H. Courtney: Metall. Trans. A, 1990, vol. 21A, pp. 289–303.10.1007/BF02782409 ↗
23. J.N. Harris: Mechanical Working of Metals, Pergamon Press, Oxford, U.K., 1983.
24. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier, Boston, MA, 2004.10.1016/B978-008044164-1/50016-5 ↗
25. F.A. Mohamed: Acta Mater., 2003, vol. 51, pp. 4107–19.10.1016/S1359-6454(03)00230-1 ↗
26. D. Witkin and E.J. Lavernia: Progr. Mater. Sci., 2006, vol. 51, pp. 1–60.10.1016/j.pmatsci.2005.04.004 ↗
27. D. Witkin, B.Q. Han, and E.J. Lavernia: J. Mater. Res., 2005, vol. 20, pp. 2117–26.10.1557/JMR.2005.0261 ↗
28. G. Lucadamo, N.Y.C. Yang, C.S. Marchi, and E.J. Lavernia: Mater. Sci. Eng. A, 2006, vol. 430, pp. 230–41.10.1016/j.msea.2006.05.039 ↗
29. D. Witkin, B.Q. Han, and E.J. Lavernia: J. Mater. Eng. Perform., 2005, vol. 14, pp. 519–27.10.1361/105994905X56232 ↗
30. E.J. Lavernia, B.Q. Han, and J.M. Schoenung: Mater. Sci. Eng. A, 2008, vol. 493, pp. 207–14.10.1016/j.msea.2007.06.099 ↗
31. Y. Li, W. Liu, V. Ortalan, W.F. Li, Z. Zhang, R. Vogt, N.D. Browning, E.J. Lavernia, and J.M. Schoenung: Acta Mater., 2010, vol. 58, pp. 1732–40.10.1016/j.actamat.2009.11.015 ↗
32. V.L. Tellkamp, S. Dallek, D. Cheng, and E.J. Lavernia: J. Mater. Res., 2001, vol. 16, pp. 938–44.10.1557/JMR.2001.0133 ↗
33. J.R. Davis: Aluminum and Aluminum Alloys, ASM International, Materials Park, OH, 1993.
34. J.R. Davis: Stainless Steels, ASM International, Materials Park, OH, 1994.
35. A.D. Sarkar: Friction and Wear, Academic Press, New York, NY, 1980.
36. A.P. Newbery, B. Ahn, T.D. Topping, P.S. Pao, S.R. Nutt, and E.J. Lavernia: J. Mater. Process. Tech., 2008, vol. 203, pp. 37–45.10.1016/j.jmatprotec.2007.09.078 ↗
37. S. Cheng, J.A. Spencer, and W.W. Milligan: Acta Mater., 2003, vol. 51, pp. 4505–18.10.1016/S1359-6454(03)00286-6 ↗
38. F. Zhou, X.Z. Liao, Y.T. Zhu, S. Dallek, and E.J. Lavernia: Acta Mater., 2003, vol. 51, pp. 2777–91.10.1016/S1359-6454(03)00083-1 ↗
39. W.Q. Cao, A. Godfrey, N. Hansen, and Q. Liu: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 204–14.10.1007/s11661-008-9678-z ↗
40. F. Haessner and J. Schmidt: Acta Metall. Mater., 1993, vol. 41, pp. 1739–49.10.1016/0956-7151(93)90193-V ↗
41. N.R. Bauld: Mechanics of Materials, PWS Publishers, Boston, MA, 1986.