Microstructure and Crystallography of Zn-55Al-1.6Si Coating Spangle on Steel
Source abstract
Abstract
In this article, the microstructures of Zn-55Al-1.6Si coating spangles on steel were examined using optical microscopy and the crystallographic orientations of the spangles analyzed using X-ray diffraction (XRD) and electron backscatter diffraction (EBSD). It was found that α-Al dendrite arms forming the spangles grew along straight lines with uniform size, uniform dendrite arm spacing, and in most sectors in directions parallel to their border lines. It was also found that (111) and (100) were the most common orientations in the coating. The likely preferred dendrite arm growth directions for the spangles having the (111) orientation were [110] or [112], whereas both [100] and [110] were possible growth directions when the spangles had (100) orientations. The [320] directions suggested in the literature were unlikely to be the growth directions in any of the spangles examined.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Material Properties and Processing · Corrosion Behavior and Inhibition · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. R.Y. Chen and D.J. Willis: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 117–28.10.1007/s11661-005-0144-x ↗
2. N. Setargew, D.J. Willis, W. Renshaw, and Q. Liu: “InterZac 2006”, Internal Conference Report, BIEC International Inc., Vancouver, WA, 2006, paper no. 34.
3. N. Setargew and D.J. Willis: “InterZac 2006”, Internal Conference Report, BIEC International Inc., Vancouver, WA, 2006, paper no. 21.
4. D. Thompson: “InterZac 2006”, Internal Conference Report, BIEC International Inc., Vancouver, WA, 2006, paper no. 18.
5. R.H. Wolf: “IntenZac 2004”, Internal Conference Report of BIEC International Inc., Vancouver, WA, 2004, paper no. 16.
6. Y. Durandet, L. Strezov, and N. Ebrill: GALVATECH’98, 20–23 Sept. 1998, Makuhari, Chiba, Japan, The Iron and Steel Institute of Japan, Tokyo, 1998, pp. 147–52.
7. T.A. Abbott and D.J. Willis: “PacZac ’99”, Internal Conference Report, BIEC International Inc., Vancouver, WA, 1999, paper no. 15.
8. Working Committee of PacZac Spangle Project: “InterZac 2000”, Internal Conference Report, BIEC International Inc., Vancouver, WA, 2000, paper no. 40.
9. B. Xu, D. Phelan, R. Dippenaar, and D. Willis: “GALVATECH’04”, Chicago, IL, Apr. 2004, AIST, Warrendale, PA, 2004, pp. 713–22.
10. Q.Y. Liu and D.J. Willis: “Examination of Spangle Fluctuation on Zn-55 pctAl Al Coating Samples,” Laboratory Report No. 1260, BlueScope Steel Research, May 1995 (internal report of BlueScope Steel Limited), Port Kembla, Australia.
11. J.H. Selverian, M.R. Notis, and A.R. Marder: J. Mater. Eng., 1987, vol. 9, no 2, pp. 133–40.10.1007/BF02833702 ↗
12. J.C. Zoccola, H.E. Townsend, A.R. Borzillo, and J.B. Horton: Atmospheric Factors Affecting the Corrosion of Engineering Metals, ASTM STP 646, S.K. Coburn, ed., ASTM, West Conshohocken, PA, 1978, pp. 165–84.10.1520/STP27323S ↗
13. H.J. Cleary: in Micro-Structural Science, D.O. Northwood, W.E. White, and G.F. Van der Voort, eds., ASM, Metals Park, OH, 1985, vol. 12, pp. 103–13.
14. A. Sémoroz, Y. Durandet, and M. Rappaz: Acta Mater., 2001, vol. 49, pp. 529–41.10.1016/S1359-6454(00)00322-0 ↗
15. W. Kurz and D.J. Fisher: Fundamentals of Solidification, 3rd ed., Trans Tech Publications, Aedermannsdorf, Switzerland, 1989, pp. 67–69.
16. M.C. Flemings: Solidification Processing, McGraw-Hill, New York, NY, 1974, p. 159.
17. D.J. Dingley and V. Randle: J. Mater. Rev., 1992, vol. 27, pp. 4545–66.10.1007/BF01165988 ↗
18. H. Lu and B. Parker: “Electron Back Scattering Patterns—Experimental Methods and Application to Metal Deformation,” Conf. Proc. Materials Research 96, Institute of Metals and Materials Australasia, Brisbane, Australia, 1996.
19. J.X. Li and D.M. Hreso: “InterZac 2010”, Internal Conference Report, BIEC International Inc., Vancouver, WA, 2010, paper no. 26.
20. H.E. Townsend: ASM Handbook, vol. 5, Surface Engineering, ASM INTERNATIONAL, Metals Park, OH, 1994, pp. 339–48.
21. B.D. Cullity: Elements of X-ray Diffraction, 2nd ed., Addison-Wesley Publishing Company, Boston, MA, 1978, pp. 122–23.
22. J. Strutzenberger and J. Faderl: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 631–46.10.1007/s11661-998-0144-8 ↗