journal article·2014-06

M5C2 Carbides in a High-Chromium Ferritic/Martensitic Steel

Yin Zhong Shen, Bo Ji, Xiao Ling Zhou, Jun Zhu

Publisher page

Abstract

The precipitate phases in an 11 pct Cr ferritic/martensitic steel normalized at 1323 K (1050 °C) for 0.5 hour and tempered at 1053 K (780 °C) for 1.5 hours have been investigated. Except for dominant phases, Cr-rich M23C6 carbide and Nb-rich, Ta-Nb-rich, and V-rich MC carbides, needle-like precipitates with a typical size of 70 to 310 and 10 to 30 nm for the length of the long and short axis of the needles, respectively, were also observed on the extraction carbon replica of the steel. The typical metallic element composition of the needle-like precipitates is about 53-82Fe, 14-26Cr, 0.5-18Ta, 1-6W, and 2-5Co in atomic pct. Through energy dispersive X-ray analysis and electron diffraction along with calculations regarding lattice parameter and interplanar spacing, the needle-like precipitates were identified as a Fe-rich M5C2 carbide, which is not known to have been reported previously in high-chromium steels. The M5C2 carbide has a base-centered monoclinic crystal structure with the approximate lattice parameters a/b/c = 1.142/0.5186/0.5383 nm and β = 104.68 deg. The formation of the Fe-rich M5C2 carbides in the steel has been discussed. The effect of chromium content in matrix and boron addition on the precipitate phases in ferritic/martensitic steels has also been discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. F. Abe: Sci. Technol. Adv. Mater., 2008, vol. 9, art. no. 013002.
2. H. Kushima, K. Kimura and F. Abe: Tetsu-to-Hagane, 1999, vol. 85, pp. 841–47.10.2355/tetsutohagane1955.85.11_841 ↗
3. F. Abe, M. Igarashi, S. Wanikawa, M, Tabuchi, T. Itagaki, K. Kimura, and K. Yamaguchi: in Proc. PARSONS, 2000 Advanced Materials for 21st Century Turbines and Power Plant, The Institute of Materials, London, 2000, pp. 129–42.
4. F. Masuyama: Advanced Heat Resistant Steels for Power Generation, R. Viswanathan and J. Nutting, eds., The Institute of Materials, London, 1999, pp. 33–48.
5. R. Viswanathan and W. Bakker: J. Mater. Eng. Perf., 2001, vol. 10, pp. 81–95.10.1361/105994901770345394 ↗
6. R. Viswanathan and W. Bakker: J. Mater. Eng. Perf., 2001, vol. 10, pp. 96–101.10.1361/105994901770345402 ↗
7. V. Kneževic, G. Sauthoff, J. Vilk, G. Inden, A. Schneider, R. Agamennone, W. Blum, Y. Wang, A. Scholz, C. Berger, J. Ehlers and L. Singheiser: ISIJ Int., 2002, vol. 42, pp. 1505–14.10.2355/isijinternational.42.1505 ↗
8. V. Knežević, J. Balun, G. Sauthoff, G. Inden and A. Schneider: Mater. Sci. Eng., 2008, vol. A477, pp. 334–43.10.1016/j.msea.2007.05.047 ↗
9. F. Abe, T. Noda, H. Araki and M. Okada: J. Nucl. Sci. Technol., 1994, vol. 31, pp. 279–92.10.1080/18811248.1994.9735152 ↗
10. R. L. Klueh and D. R. Harries: High-Chromium Ferritic and Martensitic Steels for Nuclear Applications, ASTM, West Conshohocken, PA, 2001, pp. 5–27.10.1520/MONO3-EB ↗
11. R.L. Klueh and A.T. Nelson: J. Nucl. Mater., 2007, vol. 371, pp. 37–52.10.1016/j.jnucmat.2007.05.005 ↗
12. S. Takeuchi and A.S. Argon: J. Mater. Sci., 1976, vol. 11, pp. 1542–66.10.1007/BF00540888 ↗
13. M. Meier and W. Blum: Mater. Sci. Eng., 1993, vol. A164, pp. 290–94.10.1016/0921-5093(93)90680-D ↗
14. K. Maruyama, K. Sawada and J. Koike: ISIJ Int., 2001, vol. 41, pp. 641–53.10.2355/isijinternational.41.641 ↗
15. F. Abe: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 305–39.10.1016/j.cossms.2004.12.001 ↗
16. V. Sklenicka, K. Kucharova, M. Svoboda, L. Kloc, J. Bursik and A. Kroupa: Mater. Character., 2003, vol. 51, pp. 35–48.10.1016/j.matchar.2003.09.012 ↗
17. H.K. Danielsen and J. Hald: Energy Mater., 2006, vol. 1, pp. 49–57.10.1179/174892306X99732 ↗
18. J. Hald and Z. Kuboň: Microstructural Development and Stability in High Chromium Ferritic Power Plant Steels, A. Strang and D.J. Gooch, eds., The Institute of Materials, London, 1997, pp. 159–76.
19. V. Foldyna, Z. Kuboň, A. Jakobová, and V. Vodárek: Microstructural Development and Stability in High Chromium Ferritic Power Plant Steels, A. Strang and D.J. Gooch, eds., The Institute of Materials, London, 1997, pp. 73–92.
20. B. Nath, E. Metcalfe, and J. Hald: Microstructural Development and Stability in High Chromium Ferritic Power Plant Steels, A. Strang, and D.J. Gooch, eds., The Institute of Materials, London, 1997, pp. 123–43.
21. Y.Z. Shen, S.H. Kim, H.D. Cho, C.H. Han, and W.S. Ryu: J. Nucl. Mater., 2010, vol. 400, pp. 94–102.10.1016/j.jnucmat.2010.02.016 ↗
22. Y.Z. Shen, S.H. Kim, H.D. Cho, C.H. Han, and W.S. Ryu, C.B. Lee: J. Nucl. Mater., 2008, vol. 378, pp. 153–58.10.1016/j.jnucmat.2008.04.020 ↗
23. G. Hägg: Z. Kristallogr., 1934, vol. 89, pp. 92–94.10.1524/zkri.1934.89.1.92 ↗
24. S. Nagakura, Y. Hirotsu, M. Kusunoki, and Y. Nakamura: Metall. Trans. A, 1983, vol. 14A, pp. 1025–31.10.1007/BF02670441 ↗
25. C.B. Ma, T. Ando, D.L. Williamson, and G. Krauss: Metall. Trans. A, 1983, vol. 14A, pp. 1033–45.10.1007/BF02670442 ↗
26. C.L. Wittman, M.A. Meyers, and H.-r. Pak: Metall. Trans. A, 1990, vol. 21A, pp. 707–16.10.1007/BF02671941 ↗
27. S.D. Mann, D.G. McCulloch, and B.C. Muddle: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 509–20.10.1007/BF02663901 ↗
28. K.H. Jack and S. Wild: Nature, 1966, vol. 212, pp. 248–50.10.1038/212248b0 ↗
29. G.R. Speich and W.C. Leslie: Metall. Trans., 1972, vol. 3, pp. 1043–54.10.1007/BF02642436 ↗
30. J. Ågren, H. Abe, T. Suzuki, and Y. Sakuma: Metall. Trans. A, 1986, vol. 17A, pp. 617–20.10.1007/BF02643980 ↗
31. W.B. Jones, C.R. Hills, and D.H. Polonis: Metall. Trans. A, 1991, vol. 22A, pp. 1049–58.10.1007/BF02661098 ↗
32. F.B. Pickering: Microstructural Development and Stability in High Chromium Ferritic Power Plant Steels, A. Strang and D.J. Gooch, eds., The Institute of Materials, London, 1997, pp. 1–29.
33. M.A. Asadabad, S. Kheirandish, and A.J. Novinrooz: J. Iron Steel Res. Int., 2010, vol. 17, pp. 57–62.10.1016/S1006-706X(10)60184-7 ↗
34. M.A. Asadabad, S. Kheirandish, and A.J. Novinrooz: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1612–16.10.1016/j.msea.2009.10.042 ↗
35. N. Fujita and H.K.D.H. Bhadeshia: ISIJ Int., 2002, vol. 42, pp. 760–69.10.2355/isijinternational.42.760 ↗
36. M. Manes, A.D. Damick, M. Mentser, E.M. Cohn, and L.J.E. Hofer: J. Am. Chem. Soc., 1952, vol. 74, pp. 6207–09.10.1021/ja01144a015 ↗
37. S. Nagakura and S. Oketani: Trans. Iron Steel Inst. Jpn., 1968, vol. 8, pp. 265–94.10.2355/isijinternational1966.8.265 ↗
38. V.A. Bišs and T. Wada: Metall. Trans. A, 1985, vol. 16A, pp. 109–14.10.1007/BF02656718 ↗
39. J.H. Kim, J. Kim, J.H. Park, C.K. Kim, C.S. Yoon, and Y. Shon: Nanotechnology, 2007, vol. 18, p. 115609.10.1088/0957-4484/18/11/115609 ↗
40. F.G. Mendonça, J.D. Ardisson, M.G. Rosmaninho, R.M. Lago, and J.C. Tristão: Hyperfine Interact, 2011, vol. 202, pp. 123–29.10.1007/s10751-011-0374-9 ↗
41. M. Yoshino, Y. Mishima, Y. Toda, H. Kushima, K. Sawada, and K. Kimura: ISIJ Int., 2005, vol. 45, pp. 107–15.10.2355/isijinternational.45.107 ↗
42. G.R. Speich: Trans. TMS-AIME, 1969, vol. 245, pp. 2553–64.
43. M.G.H. Wells: Acta Metall., 1964, vol. 12, pp. 389–99.10.1016/0001-6160(64)90009-4 ↗
44. C.X. Liu, D.T. Zhang, Y.C. Liu, Q. Wang, and Z.S. Yan: Nucl. Eng. Des., 2011, vol. 241, pp. 2411–15.10.1016/j.nucengdes.2011.04.039 ↗
45. G. Ghosh and G.B. Olson: Acta Mater., 2002, vol. 50, pp. 2099–119.10.1016/S1359-6454(02)00054-X ↗
46. X. Liu and T. Fujita: ISIJ Int., 1989, vol. 29, pp. 680–86.10.2355/isijinternational.29.680 ↗
47. S. Li, E. Zumrat, L. Zhang, F. Sun, Y. Shen and A. Shan: Mater. Charact., 2012, vol. 73, pp. 144–52.10.1016/j.matchar.2012.08.009 ↗
48. F. Abe: Int. J. Mat. Res., 2008, vol. 99, pp. 387–94.10.3139/146.101650 ↗
49. L. Li, R. Maclachlan, Mark A.E. Jepson and R. Thomson: Metall. Mater. Trans. A, 2013, vol. 44, pp. 3411–18.10.1007/s11661-013-1642-x ↗