Influence of Metal Properties on the Formation and Evolution of Metal Coatings During Mechanical Coating
Source abstract
Abstract
Powders of Cu, Ti, Ni, Fe, and Zn metals were used to prepare coatings on the surfaces of Al2O3 balls by the mechanical coating technique. The coated Al2O3 balls were characterized with XRD and SEM. The results showed that all the metal powders except Ni formed continuous metal coatings. The evolution of metal coatings during mechanical coating was also investigated. The analysis indicates that as long as continuous metal coatings can be formed, the evolution can fall into the following stages: nucleation, formation and coalescence of discrete islands, formation and thickening of continuous coatings, and exfoliation of continuous coatings. Electronegativity of the metal was shown to have a major effect on the adhesion of the tiny metal particles on the surfaces of the Al2O3 balls during the initial stage of mechanical coating. The lower the electronegativity of the metal, the greater the coverage of the metal on the Al2O3 ball and the easier the adhesion of the tiny metal particles. Further, the better the plastic deformability of metal, the easier the cold welding among metal powder particles and the greater the thickness of the continuous metal coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. C. Suryanarayana, E. Ivanov, and V.V. Boldyrev: Mater. Sci. Eng. A, 2001, vol. 304-306, pp. 151-58.10.1016/S0921-5093(00)01465-9 ↗
2. K. Kobayashi: Mater. Trans. JIM, 1995, vol. 36, pp. 134-37.10.2320/matertrans1989.36.134 ↗
3. S. Romankov, W. Sha, S.D. Kaloshkin, and K. Kaevitser: Surf. Coat. Technol., 2006, vol. 201, pp. 3235-45.10.1016/j.surfcoat.2006.06.044 ↗
4. G. Gupta, K. Mondal, and R. Balasubramaniam: J. Alloy. Compd., 2009, vol. 482, pp. 118-22.10.1016/j.jallcom.2009.04.048 ↗
5. I. Farahbakhsh, A. Zakeri, P. Manikandan, and K. Hokamoto: Appl. Surf. Sci., 2011, vol. 257, pp. 2830-37.10.1016/j.apsusc.2010.10.071 ↗
6. H. Yoshida, Y. Lu, H. Nakayama, and M. Hirohashi: J. Alloy. Compd., 2009, vol. 475, pp. 383-86.10.1016/j.jallcom.2008.07.059 ↗
7. Y. Lu, H. Yoshida, H. Nakayama, L. Hao, and M. Hirohashi: Mater. Sci. Forum, 2011, vol. 675-677, pp. 1229-32.10.4028/www.scientific.net/MSF.675-677.1229 ↗
8. L. Hao, Y. Lu, H. Asanuma, and J. Guo: J. Mater. Process. Technol., 2012, vol. 212, pp. 1169-76.10.1016/j.jmatprotec.2012.01.001 ↗
9. L. Hao, Y. Lu, H. Sato, and H. Asanuma: Powder Technol., 2012, vol. 228, pp. 377-84.10.1016/j.powtec.2012.05.056 ↗
10. J.A. Dean: Lange’s Handbook of Chemistry, 14th ed., Section 4, McGraw-Hill, New York, 1999, p. 29.
11. L.C. Allen: J. Am. Chem. Soc., 1989, vol. 111, pp. 9003-14.10.1021/ja00207a003 ↗
12. John C. Kotz, Paul M. Treichel, and John R. Townsend: Chemistry & Chemical Reactivity, 8 th ed., Mary Finch, Belmont, p. 372.
13. T. Kita, S. Saitoh, and S. Iwamori: J. Vac. Soc. Jpn., 2008, vol. 51, pp. 205-7.10.3131/jvsj2.51.205 ↗
14. Y.S. Chaug, N.J. Chou, and Y.H. Kim: J. Vac. Sci. Technol. A, 1987, vol. 5, pp. 1288-91.10.1116/1.574792 ↗
15. F.S. Ohuchi and M. Kohyama: J. Am. Ceram. Soc., 1991, vol. 74, pp. 1163-87.10.1111/j.1151-2916.1991.tb04086.x ↗
16. Q. Zhang and F.S. Ohuchi: J. Vac. Sci. Technol. A, 1990, vol. 8, pp. 2107-12.10.1116/1.577011 ↗
17. Q. Zhang and F.S. Ohuchi: Mater. Res. Soc. Symp. Proc., 1989, vol. 153, pp. 71-76.10.1557/PROC-153-71 ↗
18. A.M. Howatson, P.G. Lund, and J.D. Todd: Engineering Tables and Data, Chapman & Hall, London, 1991, p. 41.
19. L. Lü, M.O. Lai, and S. Zhang: J. Mater. Process. Technol., 1995, vol. 52, pp. 539-46.10.1016/0924-0136(94)01620-G ↗
20. C. Suryanarayana: Prog. Mater. Sci., 2001, vol. 46, pp. 1-184.10.1016/S0079-6425(99)00010-9 ↗