journal article·2009-09

Development of Texture, Microstructure, and Grain Boundary Character Distribution in a High-Strength Boron-Added Interstitial-Free Steel after Severe Cold Rolling and Annealing

Rajib Saha, R.K. Ray

Publisher page

Abstract

A high-strength boron-added interstitial-free (IF) steel was subjected to cold rolling by 90 and 98 pct. Both these materials were subjected to annealing at 650 °C and 700 °C for various lengths of time. An in-depth thorough study has been carried out on the evolution of texture, microstructure, and grain boundary character distribution (GBCD), as a function of cold rolling and annealing. Formation of strain-free nanosize grains at few places has been observed in the severely cold-rolled (98 pct) steel. Ultrafine grains formed in this material at the early stages of annealing. The deformation texture sharpened and the high-angle grain boundary (HAGB) density increased with increasing amount of cold rolling. The intensity of α-fiber components increased at the early stages of annealing, while the γ-fiber components were found to predominate at the later stages. Selective growth of grains having orientations {111} $$ \langle 123\rangle $$ and {554} $$ \langle 225\rangle $$ occurred in the 98 pct cold-rolled and annealed material. The textural and microstructural results indicate that in these materials the recrystallization process may be of a continuous type.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. R.K. Ray, J.J. Jonas, and R.E. Hook: Int. Mater. Rev., 1994, vol. 4, pp. 129–56.10.1179/imr.1994.39.4.129 ↗
2. D.T. Llewellyn and R.C. Hudd: Steels: Metallurgy and Applications, 3rd ed., Butterworth–Heinemann Publishers, Oxford, England, 1998, pp. 1–301, ISBN: 9780750637572.10.1016/B978-075063757-2/50001-9 ↗
3. M. de F. Filipe Pocas: Ecola Superior de:Caning/Cans and Their Manufacture, Elsevier Science Ltd., New York, NY, 1998.
4. C. Dasharathy: Report No. SM/668/A, British Steel Corp., London, England, 1973.
5. B. Hutchinson: Phil. Trans. R. Soc. London, 1999, vol. 357, pp. 1471–85.10.1098/rsta.1999.0385 ↗
6. S. Mishra and C. Darmaan: Int. Met. Rev., 1984, vol. 29 (1), pp. 25–40.10.1179/imtr.1984.29.1.25 ↗
7. S. Hoile: Mater. Sci. Technol., 2000, vol. 16, pp. 1079–94.10.1179/026708300101506902 ↗
8. Y. Saito, H. Utsunomiya, N. Tsuji, and T. Sakai: Acta Mater., 1999, vol. 47 (2), pp. 579–83.10.1016/S1359-6454(98)00365-6 ↗
9. Y. Saito, N. Tsuji, H. Utsunomiya, T. Sakai, and R.G. Hong: Scripta Mater., 1998, vol. 39, pp. 1221–27.10.1016/S1359-6462(98)00302-9 ↗
10. N.T. Suji, Y. Saito, S.H. Lee, and Y. Minamino: Adv. Eng. Mater., 2003, vol. 5, pp. 338–48.10.1002/adem.200310077 ↗
11. N.T. Suji, Y. Ito, Y. Saito, and Y. Minamino: Scripta Mater., 2002, vol. 47, pp. 893–99.10.1016/S1359-6462(02)00282-8 ↗
12. A.L.M. Costa, A.C.C. Reis, L. Kestens, and M.S. Andrade: Mater. Sci. Eng., 2005, vol. A406, pp. 279–89.10.1016/j.msea.2005.06.058 ↗
13. R.Z. Valiev, A.V. Korznikov, and R.R. Mulyukov: Phys. Met. Metallogr., 1992, vol. 73, pp. 373–84.
14. V.M. Segal, V.I. Reznikov, A.D. Drobyshevskiy, and V.I. Kopylov: Russ. Metall., 1981, vol. 1, pp. 99–105.
15. D.H. Shin, J.J. Park, S.Y. Chang, Y.K. Lee, and K.T. Park: ISIJ Int., 2002, vol. 42, p. 1490.10.2355/isijinternational.42.1490 ↗
16. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Prog. Mater. Sci., 2000, vol. 45, pp. 103–40.10.1016/S0079-6425(99)00007-9 ↗
17. Yu. Ivanisenko, R.K. Wunderlich, R.Z. Valiev, and H.J. Fecht: Scripta Mater., 2004, vol. 9 (10), pp. 947–52.10.1016/S1359-6462(03)00478-0 ↗
18. J. Yin, M. Umemoto, Z.G. Liu, and K. Tsuchiya: ISIJ Int., 2001, vol. 41 (11), pp. 1389–96.10.2355/isijinternational.41.1389 ↗
19. Z.G. Liu, H.J. Fetch, Y. Xu, J. Yin, K. Tsuchiya, and M. Umemoto: Mater. Sci. Eng., 2003, vol. A362, pp. 322–26.10.1016/S0921-5093(03)00631-2 ↗
20. G.P. Dinda, H. Rosner, and G. Wilde: Mater. Sci. Eng., 2005, vols. 410–411, pp. 328–33.10.1016/j.msea.2005.08.091 ↗
21. G.P. Dinda, H. Rosner, and G. Wilde: Scripta Mater., 2005, vol. 52, pp. 577–82.10.1016/j.scriptamat.2004.11.034 ↗
22. A.C.C. Reis, L. Kestens, and Y. Houbaert: Proc. 22nd Risø Symp. on Material Science, A.R. Dinesen, M. Eldrup, D. Juul Jensen, S. Linderoth, and T.B. Pedersen, eds., Risø National Laboratory, Roskilde, Denmark, 2001, pp. 383–88.
23. X. Zaho, T.F. Jing, Y.W. Gao, G.Y. Qiao, J.F. Zhou, and W. Wang: Mater. Sci. Eng., 2005, vol. A397, pp. 117–24.
24. D.A. Hughes and N. Hansen: Acta Mater., 1997, vol. 45 (9), pp. 3871–86.10.1016/S1359-6454(97)00027-X ↗
25. D.A. Hughes and N. Hansen: Scripta Metall. Mater., 1995, vol. 33 (2), pp. 315–21.10.1016/0956-716X(95)00143-J ↗
26. D. Juul Jensen: Acta Mater., 1995, vol. 43, pp. 4117–31.
27. B.L. Li, A. Godfrey, Q.C. Meng, Q. Liu, and N. Hansen: Acta Mater., 2004, vol. 52, pp. 1069–77.10.1016/j.actamat.2003.10.040 ↗
28. D.P. Field: Ultramicroscopy, 1997, vols. 1-9, pp. 67–75.
29. F.J. Humphreys: Scripta Mater., 2004, vol. 51, pp. 771–76.10.1016/j.scriptamat.2004.05.016 ↗
30. R. Saha: Ph.D. Thesis, IIT Kanpur, Kanpur, 2007, pp. 1–300.
31. R. Saha and R.K. Ray: Mater. Sci. Eng. A, 2007, vol. 459, pp. 223–26.10.1016/j.msea.2007.01.068 ↗
32. R. Saha and R.K. Ray: Scripta Mater., 2007, vol. 57, pp. 841–44.10.1016/j.scriptamat.2007.06.064 ↗
33. F. Emren, U. Von Schlippenbach, and K. Luke: Acta Metall., 1986, vol. 34 (11), pp. 2105–15.10.1016/0001-6160(86)90156-2 ↗
34. R. Saha and R.K. Ray: ISIJ Int., 2008, vol. 48 (7), pp. 976–83.10.2355/isijinternational.48.976 ↗
35. F. Yuichi, K. Tomohiro, T. Toshihiro, and T. Setsuo: Testu-to-Hagané, 2003, vol. 89 (3), p. 62.
36. T. Nishizawa: Testu-to-Hagané,1984, vol. 70 (3), pp. 1984–92.10.2355/tetsutohagane1955.70.15_1984 ↗
37. N. Tsuji, Y. Matsubara, T. Sakai, and Y. Saito: ISIJ Int., 1997, vol. 37 (8), pp. 797–803.10.2355/isijinternational.37.797 ↗
38. A. Belyakov, Y. Kimura, and K. Tsuzaki: Mater. Sci. Eng., 2005, vol. A403, pp. 249–59.10.1016/j.msea.2005.05.057 ↗
39. J. Haga, N. Mizui, T. Nagamichi, and A. Okamoto: ISIJ Int., 1998, vol. 38 (6), pp. 580–89.10.2355/isijinternational.38.580 ↗
40. Y. Hosoya, T. Hasimoto, and A. Nishimoto: Physical Metallurgy of IF Steels, ISIJ, Tokyo, 1993, pp. 179–85.
41. I. Tsukatani: Testu-to-Hagané, 1989, vol. 75, pp. 774–80.10.2355/tetsutohagane1955.75.5_774 ↗
42. R. Saha, R.K. Ray, and D. Bhattacharjee: Scripta Mater., 2007, vol. 57, pp. 257–60.10.1016/j.scriptamat.2007.03.055 ↗