journal article·2003-11Open access

Microstructure and fatigue properties of hydroformed aluminum alloys 6063 and 5754

Alan A. Luo, Robert C. Kubic, John M. Tartaglia

Abstract

This study investigated the microstructure and fatigue properties of hydroformed sections of the 5754 and 6063 aluminum alloys. The second-phase particles in 6063-T7 are identified as a mixture of Al12Fe3Si and Al9Fe2Si2, with a slightly higher fraction of the former. The constituent particles in the 5754 alloy are Al4Mn-type hexagonal compounds, where Mn is partially substituted by various other elements, resulting in Al4(Fe,Mn,Si,Cr). The results show that despite its lower yield strength, the hydroformed 5754 alloy has higher ultimate tensile strength, ductility, and, more importantly, higher fatigue resistance than the 6063 material. Both crystallographic stage I and noncrystallographic stage II cracking are found in the 6063-T7 samples, but only stage II cracking is observed in the 5754 alloy. This implies that the low fatigue strength of 6063-T7 is related to its relatively large grain size, resulting in rapid stage I crack propagation. The higher fatigue lives of the 5754 alloy compared to the 6063 alloy in both the low- and high-cycle life regimes are due to the increased fatigue-crack-initiation and propagation resistance of the 5754 alloy and its probable cyclic strain-hardening behavior.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. W. Rempe: Seam Welded Tubes for Hydroforming and Other Forming Processes, VAW alatubes GmbH Company Brochure, VAW alatubes GmbH Hannover, Germany.
2. J.E. Hatch: Aluminum: Properties and Physical Metallurgy, ASM, Metals Park, OH, 1984, p. 64.
3. H.S. Yang, M. Shaarbaf, and K.B. Brown: in Superplasticity and Superplastic Forming, A.K. Ghosh and T.R. Bieler, eds., TMS, Warrendale, PA, 1995, pp. 17–24.
4. J.A. Bannantine, J.J. Comer, and J.L. Handrock: Fundamentals of Metal Fatigue Analysis, Prentice Hall, Englewood Cliffs, NJ, 1990.
5. ASM Handbook, vol. 19, Fatigue and Fracture, 10th ed., ASM INTERNATIONAL, Materials Park, OH, 1996.
6. N.S. Stoloff and D.J. Duquette: in CRC Critical Reviews in Solid State Sciences, CRC Press, Boca Raton, FL, 1974, pp. 615–87.
7. A.A. Luo and A.K. Sachdev: in Aluminum 2002, S. Das and M.H. Skillingbreg, eds., TMS, Warrendale, PA, 2002, pp. 123–31.
8. A.A. Luo, J.M. Tartaglia, and R.C. Kubic: in Aluminum 2003, S. Das, ed., TMS, Warrendale, PA, 2003, in press.
9. T.B. Massalski: Binary Alloy Phase Diagrams, ASM, Metals Park, OH, 1986, vol. 1, p. 133.
10. Kevin Gong: Alcan Kingston R&D Center, Kingston, ON, Canada, private communication, 2001.
11. J.B. Clark and A.J. McEvily: Acta Metall., 1964, vol. 12, p. 931.10.1016/0001-6160(64)90153-1 ↗