journal article·2013-01

Effect of Tempering Time on Microstructure, Tensile Properties, and Deformation Behavior of a Ferritic Light-Weight Steel

Seung Youb Han, Sang Yong Shin, Byeong-Joo Lee, Sunghak Lee, Nack J. Kim, Jai-Hyun Kwak

Publisher page

Abstract

In the present study, a ferritic light-weight steel was tempered at 973 K (700 °C) for various tempering times, and tensile properties and deformation mechanisms were investigated and correlated to microstructure. κ-carbides precipitated in the tempered band-shaped martensite and ferrite matrix, and the tempered martensite became more decomposed with increasing tempering time. Tempering times for 3 days or longer led to the formation of austenite as irregular thick-film shapes mostly along boundaries between the tempered martensite and the ferrite matrix. Tensile tests of the 1-day-tempered specimen showed that deformation bands were homogeneously spread throughout the specimen, and that the fine carbides were sufficiently deformed inside these deformation bands resulting in high strength and ductility. The 3-day-tempered specimen showed a small amount of boundary austenite, which readily developed voids or cracks and became sites for fracture. This cracking at boundary austenites became more prominent in the 7- and 15-day-tempered specimens, as the volume fraction of boundary austenites increased with increasing tempering time. These findings suggested that, when the steel was tempered at 973 K (700 °C) for an appropriate time, i.e., 1 day, to sufficiently precipitate κ-carbides and to prevent the formation of boundary austenites, that the deformation occurred homogeneously, leading to overall higher mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. R.G. Baligidad, U. Prakash, A. Radhakrishna, V.R. Rao, P.K. Rao, and N.B. Ballal: Scripta Mater., 1997, vol. 36, pp. 667–71.10.1016/S1359-6462(96)00441-1 ↗
2. A. Radhakrishna, R.G. Baligidad, and D.S. Sarma: Scripta Mater., 2001, vol. 45, pp. 1077–82.10.1016/S1359-6462(01)01142-3 ↗
3. A. Perlade and P. Maugis: Discussion Meeting in the Development of Innovative Iron Aluminum Alloys, Arcelor Research, Toulouse, France, 2005, pp. 18–20.
4. O. Grässel and G. Frommeyer: Mater. Sci. Technol., 1998, vol. 14, pp. 1213–16.10.1179/026708398790300891 ↗
5. G. Frommeyer and J.A. Jiménezet: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 295–300.10.1007/s11661-005-0302-1 ↗
6. G. Frommeyer and U. Brüx: Steel Res. Int., 2006, vol. 77, pp. 627–33.10.1002/srin.200606440 ↗
7. K.A. Lill, A.W. Hassel, G. Frommeyer, and M. Stratmann: Electrochimica Acta, 2005, vol. 51, pp. 978–83.10.1016/j.electacta.2005.05.068 ↗
8. Y. Kimura, K. Handa, K. Hayashi, and Y. Mishima: Intermetallics, 2004, vol. 12, pp. 607–17.10.1016/j.intermet.2004.03.010 ↗
9. X.L. Wan, L. Cheng, and K.M. Wu: Met. Mater. Int., 2010, vol. 16, pp. 865–70.10.1007/s12540-010-1202-5 ↗
10. H.-S. Yang, B.-S. Seong, S.-H. Han, and S.-H. Choi: Met. Mater. Int., 2011, vol. 17, pp. 403–12.10.1007/s12540-011-0616-z ↗
11. B. Sundman, B. Jansson, and J.-O. Andersson: CALPHAD, 1985, vol. 9, pp. 153–90.10.1016/0364-5916(85)90021-5 ↗
12. “TCFE2000: The Thermo-Calc Steels Database, upgraded by B.-J. Lee and B. Sundman at KTH”, Stockholm, 1999.
13. K.-G. Chin, H.-J. Lee, J.-H. Kwak, J.-Y. Kang, and B.-J. Lee: J. Alloys Compd., 2010, vol. 505, pp. 217–23.10.1016/j.jallcom.2010.06.032 ↗
14. F.S. LePera: Metallography, 1979, vol. 12, pp. 263–68.10.1016/0026-0800(79)90041-7 ↗
15. S.Y. Han, S.Y. Shin, S. Lee, N.J. Kim, J.H. Kwak, and K. Chin: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 138–46.10.1007/s11661-010-0456-3 ↗
16. G.B. An and J.S. Park: Met. Mater. Int., 2011, vol. 17, pp. 841–45.10.1007/s12540-011-1023-1 ↗
17. P. Kratochvíl: Intermetallics, 2009, vol. 17, pp. 39–45.10.1016/j.intermet.2008.09.004 ↗
18. C.Y. Chao and T.F. Liu: Metall. Trans. A, 1993, vol. 24A, pp. 1957-63.10.1007/BF02666330 ↗
19. S.K. Kim, Y.M. Kim, Y.J. Lim, and N.J. Kim: Proceedings of 15th Conference on Mechanical Behaviors of Materials, Korea Institute of Metals and Materials, Seoul, Korea, 2001, pp. 177–86.
20. N. Ma, T. Park, D. Kim, C. Kim, and K. Chung: Met. Mater. Int., 2010, vol. 16, pp. 427–39.10.1007/s12540-010-0613-7 ↗
21. J.B. Seol, N.S. Lim, B.H. Lee, L. Renaud, and C.G. Park: Met. Mater. Int., 2011, vol. 17, pp. 413–16.10.1007/s12540-011-0617-y ↗
22. P.J. Jacques, Q. Furnémont, F. Lani, T. Pardoen, and F. Delannay: Acta Mater., 2007, vol. 55, pp. 3681–93.10.1016/j.actamat.2007.02.029 ↗
23. S. Lee, C.G. Lee, D. Kwon, and N.J. Kim: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1241–50.10.1007/BF02649861 ↗
24. K. Wallin, T. Saario, and K. Törrönen: Int. J. Fract., 1987, vol. 32, pp. 201–10.10.1007/BF00018353 ↗