Investigation of Microstructural Features Determining the Toughness of 980 MPa Bainitic Weld Metal
Source abstract
Abstract
The microstructural features that control the impact toughness of weld metals of a 980 MPa 8 pct Ni high-strength steel are investigated using instrumented Charpy V tester, optical microscope (OM), scanning electron microscope (SEM), transmission electron microscope (TEM), electron back-scattered diffraction (EBSD), and finite-element method (FEM) calculation. The results show that the critical event for cleavage fracture in this high-strength steel and weld metals is the propagation of a bainite packet-sized crack across the packet boundary into contiguous packets, and the bainitic packet sizes control the impact toughness. The high-angle misorientation boundaries detected in a bainite packet by EBSD form fine tear ridges on fracture surfaces. However, they are not the decisive factors controlling the cleavage fracture. The effects of Ni content are essential factors for improving the toughness. The extra large cleavage facets seriously deteriorate the toughness, which are formed on the interfaces of large columnar crystals growing in welding pools with high heat input.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. R. Cao, W. Feng, Y. Peng, W.S. Du, Z.L. Tian, and J.H. Chen: Mater. Sci. Eng. A, 2010, vol. 528 A, pp. 631-42.10.1016/j.msea.2010.09.053 ↗
2. J.R. Low: Deformation and Fracture in Solids, Springer-Verlag, Berlin, Germany, 1956, pp. 163-76.
3. A. Kamada, N. Koshizuka, and T. Funakoshi: Trans. ISIJ, 1976, vol. 16, pp. 407-16.10.2355/isijinternational1966.16.407 ↗
4. G.T. Hahn: Metall. Trans. A, 1984, vol. 15, pp. 947-59.10.1007/BF02644685 ↗
5. W.J. Yang, B.S. Lee, Y.J. Oh, M.Y. Huh, and J.H. Hong: Mater. Sci. Eng. A, 2004, vol. 379 A, pp. 17-26.10.1016/j.msea.2003.10.289 ↗
6. A. Echeverria and J.M. Rodriques-Ibabe: Mater. Sci. Eng. A, 2003, vol. 346A, pp. 149-58.10.1016/S0921-5093(02)00538-5 ↗
7. L. Rancel, M. Gomez, S.F. Medina, and I. Gutierrez: Mater. Sci. Eng. A, 2011, vol. 530A, pp. 21-27.10.1016/j.msea.2011.09.001 ↗
8. L.A. Norstrom and O. Vingsbo: Met. Sci., 1979, vol. 13, pp. 677-84.10.1179/030634579790434321 ↗
9. R. Cao, Y.J. Yan, W.S. Du, Z.L. Tian, Y. Peng, and J.H. Chen: Mater. Sci. Technol., 2011, vol. 27, pp. 145-55.10.1179/174328409X439169 ↗
10. J.H. Chen, G.Z. Wang, C. Yan, H. Ma, and L. Zhu: Int. J. Fract., 1997, vol. 83, pp. 105-20.10.1023/A:1007306932437 ↗
11. B.K. Narayanan, L. Kovarik, M.A. Quintana, and M.J. Mills: Sci. Technol. Weld. Join., 2011, vol. 16, pp. 12-22.10.1179/136217110X12720264008312 ↗
12. S. Morito, X. Huang, T. Furuhara, T. Maki, and N. Hansen: Acta Mater., 2006, vol. 54, pp. 5323-31.10.1016/j.actamat.2006.07.009 ↗
13. A.F. Gourgues-Lorenzon: J. Electron Microsc., 2009, vol. 233, pp. 460-73.10.1111/j.1365-2818.2009.03130.x ↗
14. J.H. Chen, Y. Kikuta, T. Araki, M. Yoneda, and Y. Matsuda: Acta Mater., 1984, vol. 32, pp. 1779-88.10.1016/0001-6160(84)90234-7 ↗
15. V. Miihkinen and D.V. Edmonds: Mater. Sci. Technol., 1987, vol. 3, pp. 422-31.10.1179/026708387790329595 ↗
16. V. Miihkinen and D.V. Edmonds: Mater. Sci. Technol., 1987, vol. 3, pp. 432-40.10.1179/026708387790329702 ↗