journal article·2011-06Open access

Effect of Cr Additions on Toughness, Strength, and Oxidation Resistance of an Nb-4Si-20Ti-6Hf Alloy at Room and/or High Temperatures

Jiangbo Sha, Jun Liu, Chungen Zhou

Abstract

The mechanical properties and oxidation resistance of Nb-4Si-20Ti-6Hf-yCr alloys (where y = 6, 10, 14 at. pct) with an NbSS-dominant NbSS/Nb3Si/Nb5Si3 microstructure at room and/or high temperatures were primarily studied. It was found that at room temperature, fracture toughness was decreased by Cr additions, the fracture mode of the NbSS phase was intergranularly cleavage, and the silicides (Nb3Si and Nb5Si3) fractured in a brittle manner. It is interesting that strength as a function of Cr content is dependent on temperature. Up to 1423 K (1150 °C), the strength was improved by Cr additions, whereas above that temperature, the strength decreased. As the Cr content increased from 6 to 14 at. pct, for example, the yield strength σ 0.2 increased from 198 to 258 MPa at 1423 K (1150 °C) but decreased from 109 to 83 MPa at 1623K (1350 °C). Cr additions cannot improve the oxidation resistance of this NbSS-dominant microstructure considerably; the weight gain at 100 hours of air exposure at 1523 K (1250 °C) was 255 mg/cm2 at a nominal Cr content of 6 at. pct and 220 mg/cm2 at a Cr content of 14 at. pct.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. B.P. Bewlay, J.J. Lewandowksi, and M.R. Jackson: JOM, 1997, vol. 49, pp. 44-46, 67.10.1007/BF02914402 ↗
2. B.P. Bewlay, A. Lipsitt, M.R. Jackson, and W.J. Reeder: Mater. Sci. Eng. A, 1995, vol. 192/3A, pp. 534-43.10.1016/0921-5093(95)03299-1 ↗
3. P.R. Subramanian, M.G. Mendiratta, and D.M. Dimiduk: JOM, 1996, vol. 48, pp. 33-43.10.1007/BF03221360 ↗
4. J.D. Rigney and J.J. Lewandowksi: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3293-3306.
5. M.G. Mendiratta and D.M. Dimiduk: Metall. Trans. A, 1993, vol. 24A, pp. 501-04.10.1007/BF02657338 ↗
6. M.G. Mendiratta, J.J. Lewandowski and D.M. Dimiduk: Metall. Mater. Trans. A, 1991, vol. 22A, pp. 1573-1583.10.1007/BF02667370 ↗
7. B.P. Bewlay, M.R. Jackson, and H.A. Lipsitt: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3801-08.10.1007/BF02595629 ↗
8. B.P. Bewlay, M.R. Jackson, J.C. Zhao, and P.R. Subramanian: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2043-52.10.1007/s11661-003-0269-8 ↗
9. B.P. Bewlay, M.R. Jackson, and P.R. Subramanian: JOM, 1999, vol. 51, pp. 32-36.10.1007/s11837-999-0077-8 ↗
10. M. Fujikara, A. Kasama, R. Tannaka, and S. Hanada: Mater. Trans. JIM, 2004, vol. 45, pp. 493-501.10.2320/matertrans.45.493 ↗
11. J. Kim, T. Tabaru, M. Sakamoto, and S. Hanada: Mater. Sci. Eng. A, 2004, vol. 372A, pp. 137-44.10.1016/j.msea.2003.12.010 ↗
12. J.B. Sha, H. Hirai, T. Tabaru, H. Ueno, A. Kitahara, and S. Hanada: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 85-94.10.1007/s11661-003-0210-1 ↗
13. C.L Ma, H. Tanaka, A. Kasama, R. Tanaka, Y. Mishima, and S. Hanada: Proc. High Temperature Ordered Intermetallic Alloys IX, Tokyo, Japan, 2001, pp. 646: N5.39.1-N5.39.6.10.1557/PROC-646-N5.39.1 ↗
14. J.B. Sha, H. Hirai, T. Tabaru, H. Ueno, A. Kitahara, and S. Hanada: Mater. Sci. Eng. A, 2003, vol. 343, nos. 1-2, pp. 282-89.10.1016/S0921-5093(02)00371-4 ↗
15. M.R. Jackson, B.P. Bewlay, and J.C. Zhao: U.S. Patent: 0066578, 2003.
16. J.C. Zhao and J.H. Westbrook: MRS Bull., September, 2003, pp. 622–30.10.1557/mrs2003.189 ↗
17. B.P. Bewlay, M.R. Jackson, J.C. Zhao, P.R. Subramanian, M.G. Mendiratta, and J.J. Lewandowski: MRS Bull., September, 2003, pp. 646–53.10.1557/mrs2003.192 ↗
18. K.S. Chan: Mater. Sci. Eng. A, 2002, vol. 329, pp. 513–22.10.1016/S0921-5093(01)01502-7 ↗
19. M.R. Jackson, B.P. Bewlay, and R.G. Rowe: JOM, 1996, vol. 48, pp. 39–44.10.1007/BF03221361 ↗
20. J.L. Yu, K.F. Zhang, Z.K. Li, X. Zheng, G.F. Wang, and R. Bai: Scripta Mater., 2009, vol. 61, pp. 620–23.10.1016/j.scriptamat.2009.05.039 ↗
21. J. Geng, P. Tsakiropoulos, and G. Shao: Mater. Sci. Eng. A, 2006, vol. 441, nos. 1-2, pp. 26–38.10.1016/j.msea.2006.08.093 ↗
22. G. Shao: Intermetallics, 2005, vol. 13, pp. 69–78.10.1016/j.intermet.2004.06.003 ↗
23. D.-Z. Wang and Y.-J. Pan: China Materials Engineering Canon Nonferrous Metals and Engineering, vol. 5, Chemistry Industry Press, Beijing, China, 2006 (in Chinese).
24. J.B. Sha, H. Hirai, T. Tabaru, H. Ueno, A. Kitahara, and S. Hanada: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2861-71.10.1007/s11661-003-0187-9 ↗
25. T.B. Massalski: Binary Alloy Phase Diagrams, vol. 1, ASM, Materials Park, OH, 1990, p. 1511.
26. K.S. Chan: Oxid. Met., 2004, vol. 61, pp. 165-94.10.1023/B:OXID.0000025330.65837.d1 ↗
27. F. Gesmundo, F. Viani, Y. Niu, and D.L. Douglass: Oxid. Met., 1993, vol. 39, pp. 197-209.10.1007/BF00665611 ↗
28. D.Z. Yao, R. Cai, C.G. Zhou, J.B. Sha, and H.R. Jiang: Corros. Sci., 2009, vol. 51, pp. 364-70.10.1016/j.corsci.2008.11.004 ↗