journal article·2010-03

Thermomechanical Fatigue Behavior of the Intermetallic γ-TiAl Alloy TNB-V5 with Different Microstructures

Marcel Roth, Horst Biermann

Publisher page

Abstract

The cyclic deformation and fatigue behavior of the γ-TiAl alloy TNB-V5 is evaluated under thermomechanical load for three different microstructures. For this purpose, strain-controlled thermomechanical fatigue (TMF) tests were carried out with different temperature-strain cycles, different temperature ranges from 400 °C to 800 °C (673 K to 1073 K), and with two different strain ranges to set a fatigue-life relation. Cyclic deformation curves, stress-strain hysteresis loops, and fatigue lives of the tests are presented. The microstructures near-gamma (NG) and duplex (DP) show comparable fatigue lives under all test parameters. The microstructure fully-lamellar (FL) offers longer fatigue lives at the same loading conditions. For a general life prediction, the damage parameter of Smith, Watson, and Topper, P SWT vs fatigue life, is well suitable, if the testing and the application temperature ranges, respectively, include temperatures above the ductile-brittle transition (approximately 750 °C). In the completely brittle material behavior regime the quality of the lifetime prediction is unacceptable. The damage parameter P HL by Haibach and Lehrke shows a comparable correlation to the fatigue life as P SWT. The results are discussed with microstructural investigations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Y.-W. Kim and D.M. Dimiduk: Structural Intermetallics 1997, TMS, Warrendale, PA, pp. 531–43.
2. F. Appel and R. Wagner: Mater. Sci. Eng., 1998, vol. R22, pp. 187–268.10.1016/S0927-796X(97)00018-1 ↗
3. D.M. Dimiduk: Mater. Sci. Eng., 1999, vol. A263, pp. 281–88.10.1016/S0921-5093(98)01158-7 ↗
4. M. Yamaguchi, H. Inui, and K. Ito: Acta Mater., 2000, vol. 48 (1), pp. 307–22.10.1016/S1359-6454(99)00301-8 ↗
5. H. Clemens and H. Kestler: Adv. Eng. Mater., 2000, vol. 2 (9), pp. 551–70.10.1002/1527-2648(200009)2:9<551::AID-ADEM551>3.0.CO;2-U ↗
6. F. Appel and M. Oehring: Titan und Titanlegierungen, Wiley-VCH, Weinheim, 2002, pp. 39–103.10.1002/9783527611089.ch2 ↗
7. Y. Shen, X. Ding, F. Wang, Y. Tan, and J.-M. Yang: J. Mater. Sci., 2004, vol. 39, pp. 6583–89.10.1023/B:JMSC.0000044899.40687.a6 ↗
8. M. Yoshihara and K. Miura: Intermetallics, 1995, vol. 3, pp. 357–63.10.1016/0966-9795(95)94254-C ↗
9. F. Appel, J.D.H. Paul, M. Oehring, and C. Buque: Gamma Titanium Aluminides, TMS, Warrendale, PA, 2003, pp. 139–51.
10. F. Appel, J.D.H. Paul, M. Oehring, H. Clemens, and F.D. Fischer: Z. Metallkd., 2004, vol. 95 (7), pp. 585–91.10.3139/146.017992 ↗
11. H. Clemens and W. Glatz: Prakt. Met., 1995, special vol. 26, pp. 257–69.
12. Y.-W. Kim and D.M. Dimiduk: JOM, 1991, vol. 43 (8), pp. 40–47.10.1007/BF03221103 ↗
13. P. Schallow: Ph.D. Thesis, Siegen, VDI Verlag, Düsseldorf, Germany, 2005.
14. V. Bauer: Ph.D. Thesis, Siegen, Shaker Verlag, Herzogenrath, Germany, 2006.
15. F.O.R. Fischer: Ph.D. Thesis, Siegen, Germany, 2000.
16. H.-J. Christ, F.O.R. Fischer, and H.J. Maier: Mater. Sci. Eng., 2001, vols. A319–A321, pp. 625–30.10.1016/S0921-5093(00)02013-X ↗
17. H.J. Maier, F.O.R. Fischer, and H.-J. Christ: ASTM Special Technical Publication, 2003, vol. 1428, pp. 145–63.
18. P. Schallow and H.-J. Christ: Proc. 5th Int. Conf. on Low Cycle Fatigue, Deutscher Verband für Materialforschung und Prüfung e.V., Berlin, 2004, pp. 195–200.
19. H.-J. Christ: Mater. Sci. Eng. A, 2007, vols. 468–470, pp. 98–108.10.1016/j.msea.2006.08.132 ↗
20. W.F. Cui, C.M. Liu, V. Bauer, and H.-J. Christ: Intermetallics, 2007, vol. 15 (5–6), pp. 675–78.10.1016/j.intermet.2006.10.027 ↗
21. V. Bauer and H.-J. Christ: Intermetallics, 2009, vol. 17 (5), pp. 370–77.10.1016/j.intermet.2008.11.013 ↗
22. S.P. Brookes, H.-J. Kühn, B. Skrotzki, H. Klingelhöffer, R. Sievert, J. Pfetzing, and G. Eggeler: Proc. 11th World Conf. on Titanium, The Japan Institute of Metals, Sendai, Japan, 2007, pp. 679–82.
23. S.P. Brookes, H.-J. Kühn, B. Skrotzki, H. Klingelhöffer, and R. Sievert: Proc. Werkstoffprüfung, Verlag Stahleisen GmbH, Düsseldorf, Germany, 2007, pp. 249–54.
24. M. Roth and H. Biermann: Scripta Mater., 2006, vol. 54, pp. 137–41.10.1016/j.scriptamat.2005.09.049 ↗
25. M. Roth and H. Biermann: Int. J. Fatigue, 2008, vol. 30, pp. 352–56.10.1016/j.ijfatigue.2007.01.049 ↗
26. P.E. Jones and D. Eylon: Mater. Sci. Eng., 1999, vol. A263, pp. 296–304.10.1016/S0921-5093(98)01160-5 ↗
27. M. Roth: Ph.D. Thesis, TU Bergakademie Freiberg, Freiberg, Germany, 2009, submitted.
28. K.N. Smith, P. Watson, and T.H. Topper: J. Mater., 1970, vol. 5 (4), pp. 767–78.
29. E. Haibach and H.P. Lehrke: Arch. Eisenhüttenwes., 1976, vol. 47 (10), pp. 623–28.10.1002/srin.197603871 ↗