journal article·2006-07

Gallium-induced magnesium enrichment on grain boundary and the gallium effect on degradation of tensile properties of aluminum alloys

Jun-Yen Uan, Cheng-Chia Chang

Publisher page

Abstract

By applying a controlled amount of gallium (3 mg or 5 mg) to double-notched samples, the effects of the gallium on the grain boundary chemistry and tensile properties of AA6061-T4 alloy were investigated. Commercial-purity aluminum AA1050 was used for comparison to determine whether alloying elements would correlate with Ga-induced embrittlement and to elucidate the physical reason that governed the occurrence of intergranular fracture in the AA6061 Al-Mg-Si alloy. The AA6061 and AA1050 samples wetted by 3 mg or 5 mg of Ga were held statically for 7 days before tensile tests were conducted. The 6061 Al-Mg-Si samples with gallium were fractured intergranularly. However, the Ga-treated AA1050 samples had a mixed fracture mode, showing better strength and ductility than the Ga-treated AA6061 alloy, independent of whether the samples had their longitudinal axis parallel or perpendicular to the rolling direction, or the holding temperatures before tensile tests. Auger electron spectroscopy scanning the intergranular facets on fracture surfaces showed that the Auger peak-to-peak ratio IGa/IAl of 6061 samples was similar to that of 1050 samples, but the high intensity of Mg signal was detected from the intergranular fracture surface of the AA6061 alloy. Magnesium being induced by Ga to enrich on the grain boundary and free surface of the AA6061 alloy was confirmed. The intergranular embrittlement of the 6061 T4 Al-Mg-Si alloy wetted by small amount of Ga involves the combination of the following two effects: Ga metal on grain boundary embrittlement, and Ga-induced magnesium enrichment on grain boundary that further decreases the strength of the grain boundary.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. H. Ohno:Science, 1998, vol. 281, pp. 951–56.10.1126/science.281.5379.951 ↗
2. A.J. Downs:Chemistry of Aluminum, Gallium, Indium and Thallium, 1st ed., Chapman & Hall, London, 1993, p. 106.10.1007/978-94-011-2170-5 ↗
3. R.G. Burton and R.A. Burton:IEEE Trans. Components Hybrids Manuf. Technol., 1988, vol. 11, pp. 112–15.10.1109/33.2973 ↗
4. J.L. Yang and H.C. Chen:Zoological Stud., 2003, vol. 42, pp. 455–61.
5. S. Izumi:Thin Solid Films, 2004, vol. 461, pp. 7–12.10.1016/j.tsf.2004.02.091 ↗
6. E.D. Williams:Thin Solid Films, 2004, vol. 461, pp. 2–6.10.1016/j.tsf.2004.02.049 ↗
7. Y.H. Liao, H.S. Yu, C.K. Ho, M.T. Wu, C.Y. Yang, J.R. Chen, and C.C. Chang:J. Occup. Environ. Med., 2004, vol. 46, pp. 931–36.10.1097/01.jom.0000137718.93558.b8 ↗
8. M.G. Nicholas and C.F. Old:J. Mater. Sci., 1979, vol. 14, pp. 1–18.10.1007/BF01028323 ↗
9. B. Joseph, M. Picat, and F. Barbier:Eur. Phys. J. AP., 1999, vol. 5, pp. 19–31.10.1051/epjap:1999108 ↗
10. R.C. Hugo and R.G. Hoagland:Acta Mater., 2000, vol. 48, pp. 1949–57.10.1016/S1359-6454(99)00463-2 ↗
11. I.J. Polmer:Light Alloys: Metallurgy of the Light Metals, 3rd ed., Butterworth-Heinemann, Oxford, U.K., 1995, pp. 7–8.
12. J.Y. Uan and C.C. Chang:Mater. Trans., 2004, vol. 45, pp. 1925–32.10.2320/matertrans.45.1925 ↗
13. R.K. Viswanadham, T.S. Sun, and J.A.S. Green:Metall. Trans. A, 1980, vol. 11, pp. 85–89.10.1007/BF02700441 ↗
14. R.G. Song, W. Dietzel, B.J. Zhang, W.J. Liu, M.K. Tseng, and A. Atrens:Acta Mater., 2004, vol. 52, pp. 4727–43.10.1016/j.actamat.2004.06.023 ↗
15. J.S. Vetrano, C.H. Henager, Jr., E.P. Simonen, S.G. Song, and S.M. Bruemmer:Boundary and Interfaces in Materials: The David A. Smith Symposium, ed. by R.C. Pond,et al., Indianapolis, Sept. 15–18, 1997, TMS, pp. 205–212.
16. O. Wouters and J.Th.M. De Hosson:Mater. Sci. Eng. A, 2003, vol. 361, pp. 331–37.10.1016/S0921-5093(03)00521-5 ↗
17. W.L. Tsai, Y. Hwu, C.H. Chen, L.W. Chang, J.H. Je, H.M. Lin, and G. Margaritondo:Nucl. Instrum. Methods Phys. Res. B, 2003, vol. 199, pp. 457–63.10.1016/S0168-583X(02)01533-1 ↗
18. E. Pereiro-Lopez, W. Ludwig, and D. Bellet:Acta Mater., 2004, vol. 52, pp. 321–32.10.1016/j.actamat.2003.09.017 ↗
19. J. Lerner and C.J. McMahon, Jr.:Mater. Sci. Eng. A, 2002, vol. 336, pp. 72–74.10.1016/S0921-5093(01)01922-0 ↗
20. S.P. Lynch:Mater. Sci. Eng. A, 1989, vol. 108, pp. 203–12.10.1016/0921-5093(89)90421-8 ↗
21. A. Rolland, M.M. Montagono, L. Roussel, and J. Cabane:Appl. Surf. Sci., 1997, vol. 108, pp. 425–32.10.1016/S0169-4332(96)00690-3 ↗
22. D.T.L. van Agterveld, G. Palasantzas, and J.Th.M. De Hosson:Appl. Surf. Sci., 1999, vol. 152, pp. 250–58.10.1016/S0169-4332(99)00323-2 ↗
23. S. Hofmann: Depth profiling in AES and XPS. InPractical Surface Analysis: Auger and X-ray Photoelectron Spectroscopy, vol. 1, 2nd ed., ed. by D. Briggs and M.P. Seah, John Wiley & Sons, New York, 1990, pp. 143–99.
24. H. Oechsner:Appl. Phys., 1975, vol. 8, pp. 185–98.10.1007/BF00896610 ↗
25. T. Nenadovic, B. Perraillon, Z. Bogdanov, Z. Djordjevic, and M. Milic:Nucl. Instrum. Methods Phys. Res. B, 1990, vol. 48, pp. 538–43.10.1016/0168-583X(90)90178-W ↗
26. R.D.K. Misra, C.J. McMahon, Jr., and A. Guha:Scripta Metall. Mater., 1994, vol. 31, pp. 1471–74.10.1016/0956-716X(94)90058-2 ↗
27. D. Bika, J.A. Pfaendtner, M. Menyhard, and C.J. McMahon, Jr.:Acta Metall. Mater., 1995, vol. 43, pp. 1895–908.10.1016/0956-7151(94)00388-X ↗
28. R.D.K. Misra, V. Satya Prasad, and P. Rama Rao:Scripta Mater., 1996, vol. 35, pp. 129–33.10.1016/1359-6462(96)00098-X ↗
29. R.D.K. Misra:Scripta Mater., 1996, vol. 35, pp. 1347–52.10.1016/1359-6462(96)00296-5 ↗
30. R.D.K. Misra:Surf. Interface Anal., 2001, vol. 31, pp. 509–21.10.1002/sia.1079 ↗
31. R. Stumpf and P.J. Feibelman:Phys. Rev. B Condens. Matter Mater. Phys., 1996, vol. 54, pp. 5145–50.10.1103/PhysRevB.54.5145 ↗
32. N.S. Stoloff and T.L. Johnston:Acta Metall., 1963, vol. 11, pp. 251–56.10.1016/0001-6160(63)90180-9 ↗
33. A.R.C. Westwood and M.H. Kamdar:Philos. Mag., 1963, vol. 8, pp. 787–804.10.1080/14786436308213836 ↗
34. M. Gupta, L. Adi, V.V. Ganesh, and T.S. Srivatsan:Curr. Sci., 2005, vol. 88, pp. 1419–25.
35. B.A. Benson and R.G. Hoagland:Scripta Metall., 1989, vol. 23, pp. 1943–48.10.1016/0036-9748(89)90487-0 ↗
36. W.Y. Chu, X.M. Liu, J.L. Luo, and L.J. Qiao:Can. Metall. Q., 1999, vol. 38, pp. 127–32.10.1016/S0008-4433(99)00002-6 ↗
37. D. Chatain, E. Rabkin, J. Derenne, and J. Bernardini:Acta Mater., 2001, vol. 49, pp. 1123–28.10.1016/S1359-6454(01)00039-8 ↗
38. C. Elbaum:Trans. AIME, 1959, vol. 215, pp. 476–78.
39. R.C. Hugo and R.G. Hoagland:Scripta Mater., 1999, vol. 41, pp. 1341–46.10.1016/S1359-6462(99)00293-6 ↗
40. X.Y. Liu and J.B. Adams:Acta Mater., 1998, vol. 46, pp. 3467–76.10.1016/S1359-6454(98)00038-X ↗
41. W. Ludwig and D. Bellet:Mater. Sci. Eng., A, 2000, vol. 281, pp. 198–203.10.1016/S0921-5093(99)00733-9 ↗
42. R.C. Hugo and R.G. Hoagland:Scripta Mater., 1998, vol. 38, pp. 523–29.10.1016/S1359-6462(97)00464-8 ↗