journal article·2013-08

Analysis of Acoustic Emission Signals during Tensile Deformation of Fe-Si Steels with Various Silicon Contents

Sabrina A. Khan, Pornthep Chivavibul, Petr Sedlak, Satoshi Arai, Manabu Enoki

Publisher page

Abstract

A systematic investigation was performed on the deformation mechanism of Fe-Si steels with various silicon contents (2, 3, and 4.5 wt pct Si) by analyzing frequency distribution of acoustic emission (AE) coupling with fracture surface observation. AE signals were recorded during tensile tests at room temperature (RT) and at an elevated temperature of (473 K) 200 °C. The results showed that both yield strength and tensile strength of Fe-Si steels increased with increasing silicon contents, whereas failure strain decreased. Increasing silicon content also increased the brittle fracture mode of the steels, especially at RT. In contrast, all specimens failed by ductile fracture mode at 473 K (200 °C). Frequency analysis showed that AE signals generated during tensile deformation were mainly distributed into two ranges, i.e., low (250 to 550 kHz) and high (550 to 750 kHz) frequency ranges. These generated AE signals were correlated with various types of observed deformation mechanisms. The low and high frequency signals corresponded to breaking and/or debonding of inclusions and twinning/cleavage fracture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Material Properties and Failure Mechanisms · Microstructure and Mechanical Properties of Steels · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. C. B. Scruby, C. Jones, J. M. Titchmarsh and H. N. G. Wadley: Met. Sci., 1981, vol. 15, pp. 241-261.10.1179/030634581790426750 ↗
2. S. L. McBride, J. W. MacLachlan and B. P. Paradis: J. Nondestruct. Eval., 1981, vol. 2, pp. 35-41.10.1007/BF00614995 ↗
3. K. Yoshida, Y. Iwata, H. Takagi and K. Sakamaki: J. Acoust. Emiss., 1998, vol. 16, pp. 142-149.
4. C.K. Mukhopadhyay, K.K. Ray, T. Jayakumar and B. Raj: Mater. Sci. Eng. A, 1998, vol. 255, pp. 98–106.10.1016/S0921-5093(98)00771-0 ↗
5. H. N. G. Wadley and C. B. Scruby: J. Mater. Sci., 1993, vol. 28, pp. 2517-2530.10.1007/BF01151687 ↗
6. M. J. Lii, X. F. Chen, Y. Katz and W. W. Gerberich: Acta Metall. Mater., 1990, vol. 38, p. 2435-2453.10.1016/0956-7151(90)90255-F ↗
7. S. H. Chen, Y. Katz and W. W. Gerberich: Scripta Metall. Mater., 1990, vol. 24, pp. 1125-1130.10.1016/0956-716X(90)90311-4 ↗
8. M. Gell and P. J. Worthing: Acta Metall., 1966, vol. 14, pp. 1265-1271.10.1016/0001-6160(66)90244-6 ↗
9. R. Honda: J. Phys. Soc. Jpn., 1961, vol. 16, pp. 1309-1321.10.1143/JPSJ.16.1309 ↗
10. D. Hull: Acta Metall., 1960, vol. 8, pp. 11-18.10.1016/0001-6160(60)90133-4 ↗
11. C. N. Reid: Metall. Mater. Trans. A 1981, vol. 12, pp. 371-377.10.1007/BF02648534 ↗
12. T. Smida and J. Bosansky: Mater. Sci. Eng. A, 2000, vol. 287, pp. 107–115.10.1023/A:1003697017665 ↗
13. F. Sorbello, P.E.J. Flewitt, A.G. Crocker and E. Smith: Key Eng. Mater., 2008, vol. 385-387, pp. 1-4.10.4028/www.scientific.net/KEM.385-387.1 ↗
14. F. Sorbello, P. E. J. Flewitt, G. Smith and A. G. Crocker: Acta Mater., 2009, vol. 57, pp. 2646-2656.10.1016/j.actamat.2009.02.011 ↗
15. M. A. Meyers, O. Vohringer and V. A. Lubarda: Acta Mater., 2001, vol. 49, pp. 4025-4039.10.1016/S1359-6454(01)00300-7 ↗
16. K. Ito and M. Enoki: Mater. Trans., 2007, vol. 48, pp. 1221-1226.10.2320/matertrans.I-MRA2007850 ↗
17. P. Sedlak, Y. Hirose, S. A. Khan, M. Enoki and J. Sikula: Ultrasonics, 2009, vol. 49, pp. 254-262.10.1016/j.ultras.2008.09.005 ↗
18. H. Jeong and Y. S. Jang: Compos. Struct., 2000, vol. 49, pp. 443-450.10.1016/S0263-8223(00)00079-9 ↗
19. G. Qi: NDT&E Int., 2000, vol. 33, pp. 133-144.10.1016/S0963-8695(99)00037-7 ↗
20. Y. P. Li and M. Enoki: Mater. Trans., 2007, vol. 48, pp. 1215-1220.10.2320/matertrans.I-MRA2007849 ↗
21. K. Ito, H. Kuriki, M. Watanabe, S. Kuroda and M. Enoki: Mater. Trans., 2012, vol. 53, pp. 671-675.10.2320/matertrans.MBW201118 ↗
22. H. Suzuki, T. Kinjo, Y. Hayashi, M. Takemoto, K. Ono and Y. Hayashi: J. Acoust. Emiss., 1996, vol. 14, pp. 69-84.
23. C. K. Chui: An Introduction to Wavelets, Academic Press, Sandiago, CA, 1992, pp. 49-80.
24. Q.-Q. Ni and Y. Misada: J. Soc. Mater. Sci., 1998, vol. 47, pp. 305–11. (in Japanese).10.2472/jsms.47.305 ↗
25. R. Kiessling and N. Lange: Non-Metallic Inclusions in Steel, Parts I-IV, The Metals Soc., London, 1978.
26. C. B. Scruby and H. N. G. Wadley: J. Mater. Sci., 1994, vol. 29, pp. 4167-4176.10.1007/BF00414195 ↗
27. M. Gell and P. Worthing: Acta Metall., 1966, vol. 14, p. 1265–71.10.1016/0001-6160(66)90244-6 ↗
28. C. R. Heiple and S. H. Carpenter: J. Acoust. Emiss., 1987, vol. 6, pp. 177-204.
29. C. R. Heiple and S. H. Carpenter: J. Acoust. Emiss., 1987, vol. 6, pp. 215-237.
30. K. Ono, M. Shibata and M. A. Hamstad: Metall. Trans. A, 1979, vol. 10, pp. 761-764.10.1007/BF02658399 ↗
31. S. H. Carpenter and M. R. Gorman: J. Acoust. Emiss., 1978, vol. 13, pp. S1-S7.
32. O.-Y. Kwon and K. Ono: J. Acoust. Emiss., 1990, vol. 9, pp. 123-129.
33. V.M. Finkel, I.N. Voronov, A.M. Savelyev, A. Yeliseye, and V.A. Fedorov: Phys. Met. Metallograpgy (USSR), 1970, vol. 29, p. 131.