Interplay Between Melt Flow and the 3D Distribution and Morphology of Fe-Rich Phases in AlSi Alloys
Source abstract
Abstract
Abstract The presence of Fe aids in establishing the mechanical and physical properties of AlSi alloys and is also one of the main impurities leading to formation of β-Al5FeSi intermetallics. This study aims to understand the effect of fluid flow on the dendritic microstructure with intermetallics in Al-5/7/9 wt pct Si-0.2/0.5/1.0 wt pct Fe alloys that are directionally solidified under defined thermal and fluid flow conditions. We made extensive use of 3D X-ray tomography to obtain a better insight into the morphology and formation of the intermetallics. Three-dimensional (3-D) distribution of intermetallics presented here shows that the growth of large β-Al5FeSi due to forced flow occurs in the eutectic specimen center and together with an increase in the number density of β precipitates. The 3D reconstructions have verified the β shaped to be curved, bent with twining, branched, and to have imprints, holes, and propeller-shaped platelets. The 3D views showed that hole-shaped β arose from the lateral growth around α-Al dendrites. These views also confirmed the phenomenon of shortening of β as an effect of flow in the dendritic region, where β could be fragmented or completely remelted, and ultimately resulting in microstructures with shorter β-Al5FeSi and increases in number density. The analysis revealed an interaction between melt flow, 3D distribution, and the morphology of β-Al5FeSi. The growth of a large and complex group of β intermetallics can reduce the melt flow between dendrites and strengthen pore nucleation and eutectic colonies nucleation, leading to lower permeability of the mushy zone and increased porosity in the castings.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. P. Skjerpe: Metall. Trans. A, 1987, vol. 18A, pp. 189.10.1007/BF02825700 ↗
2. V.G. Rilvinand and G.V. Raynor: Int. Metall. Rev., 1981, vol. 3, pp. 133-152.
3. S.G. Shabestari: Mater. Sci. Eng. 2004, A 383, pp. 289–298.10.1016/S0921-5093(04)00832-9 ↗
4. W. Khalifa, F.H Samuel, J.E. Gruzleski: Metall. Mater. Trans. A, 2003, vol. 34, pp. 807-825.10.1007/s11661-003-1009-9 ↗
5. C.M. Dinnis, J.A. Taylor and A.K. Dahle: Mater. Sci. Eng. A, 2006, vol. 425, pp. 286-296.10.1016/j.msea.2006.03.045 ↗
6. P.N. Crepeau: AFS Trans. 1995, vol. 103, pp. 361.
7. E. Taghaddos, M.M. Hejazi, R. Taghiabadi and S.G. Shabestari: J. Alloys Compd., 2009, vol. 468, pp. 539-545.10.1016/j.jallcom.2008.01.079 ↗
8. F.H. Samuel, A.M. Samuel, H.W. Doty: AFS Trans. 1996, vol. 104, pp. 893.
9. V. Firouzdor, M. Rajabi, E. Nejati and F. Khomamizadeh: Mater. Sci. Eng. A, 2007, vol. 454-455, pp. 528-535.10.1016/j.msea.2007.01.018 ↗
10. M. Tash, F.H. Samuel, F. Mucciardi and H.W. Doty: Mater. Sci. Eng. A, 2007, vol. 443, pp. 185-201.10.1016/j.msea.2006.08.054 ↗
11. N. Iqbal, N.H. van Dijk, S.E. Offerman, M.P. Moret, L. Katgerman and G.J. Kearley: Acta Mater., 2005, vol. 53, pp. 2875-2880.10.1016/j.actamat.2005.02.045 ↗
12. R.H. Mathiesen, L.Arnberg, K. Ramsoskar, T. Weitkamp, C. Rau and A. Snigirev: Metall. Mater. Trans. B, 2002, vol. 33, pp. 613-623.10.1007/s11663-002-0041-2 ↗
13. S. Terzi, L. Salvo, M. Suery, A.K. Dahle and E. Boller: Acta Mater. 2010, vol. 58, pp. 20-30.10.1016/j.actamat.2009.08.052 ↗
14. S. Terzi, L. Salvo, M. Suery, N. Limodin, J. Adrien, E. Maire, Y. Pannier, M. Bornert, D. Bernard, M. Felberbaum, M. Rappaz and E. Boller: Scr. Mater. 2009, vol. 61, pp. 449-452.10.1016/j.scriptamat.2009.04.041 ↗
15. F. Lasagni, A.Lasagni, E. Marks, C. Holzapfel, F. Mucklich and H.P. Degisher: Acta Mater. 2007, vol. 55, pp. 3875-3882.10.1016/j.actamat.2007.03.004 ↗
16. S. Terzi, J.A. Taylor, Y.H. Cho, L. Salvo, M. Suery, E. Boller and A.K. Dahle: Acta Mater. 2010, vol. 58, pp. 5370-5380.10.1016/j.actamat.2010.06.012 ↗
17. C.M. Dinnis, J.A. Taylor and A.K. Dahle: Scr. Mater. 2005, vol. 53, pp 955-958.10.1016/j.scriptamat.2005.06.028 ↗
18. M. Timpel, N. Wanderka, B.S. Murty and J. Banhart: Acta Mater. 2010, vol. 58, pp. 6600-6608.10.1016/j.actamat.2010.08.021 ↗
19. C. Puncreobutr, A.B Phillion, J.L. Fife, P. Rockett, A.P. Horsfield and P.D. Lee: Acta Mater. 2014, vol. 79, pp. 292-303.10.1016/j.actamat.2014.07.018 ↗
20. L. Sweet, S.M Zhu, S.X. Gao and J.A. Taylor: Metall. Mater. Trans. A, 2011, vol. 42, pp. 1737-1749.10.1007/s11661-010-0595-6 ↗
21. A. Verma, S. Kumar, P.S. Grant, K.A.Q. O’Reilly.: J. Alloys Compd., 2013, vol. 555, pp. 274–82.10.1016/j.jallcom.2012.12.077 ↗
22. J. Alkemper, S. Sous, C. Stocker and L. Ratke: J. Cryst. Gro wth, 1998, vol. 191, pp. 252–260.10.1016/S0022-0248(98)00114-6 ↗
23. S. Sous and L. Ratke: Z. Metallkd., 2005, vol. 96 (4), pp. 362–369.10.3139/146.018114 ↗
24. S. Steinbach: Ph.D. Thesis, RWTH, Aachen, Germany, 2005.
25. S. Steinbach and L. Ratke: Metall. Mater. Trans A., 2007, vol. 38, pp. 1388-1394.10.1007/s11661-007-9162-1 ↗
26. S. Steinbach, N. Euskirchen, V. Witusiewicz, L. Sturz, and L. Ratke: Mater. Sci. Forum, 2006, vol. 519–521, pp. 1795–1800.10.4028/www.scientific.net/MSF.519-521.1795 ↗
27. S. Steinbach, N. Euskirchen, V. Witusiewicz, L. Sturz, and L. Ratke: Trans. Indian Inst. Met., 2007, vol. 60(2–3), pp. 137–41.
28. M. Hainke: Ph.D. Thesis, Technical Faculty Erlangen-Nuremberg, Germany, 2004.
29. S. Steinbach: Institut für Materialphysik im Weltraum, German Aerospace Center DLR, Linder Höhe, Köln, Germany, unpublished research, 2014.
30. P. Mikolajczak and L. Ratke: Int. J. Cast Met. Res., 2013, vol. 26, pp. 339-353.10.1179/1743133613Y.0000000069 ↗
31. P. Mikolajczak and L. Ratke: The Minerals, Metals & Materials Society (TMS), Supplemental Proceedings: General Paper Selections, Volume 3, John Wiley & Sons, Inc., Hoboken, NJ, 2011.
32. P. Mikolajczak and L. Ratke: IOP Conf. Ser., Mater. Sci. Eng., 2012, vol. 27, p. 012024.10.1088/1757-899X/27/1/012024 ↗
33. J. Wang, P.D. Lee, R.W Hamilton, M. Li and J. Allison: Scr. Mater., 2009, vol. 60, pp. 516-519.10.1016/j.scriptamat.2008.11.048 ↗
34. X. Fang, G. Shao, Y.Q. Liu and Z. Fan: Mater. Sci. Eng. A, 2007, vol. 445–446, pp. 65–72.10.1016/j.msea.2006.09.038 ↗
35. S. Nafisi, D. Emadi, M.T. Shehata and R. Ghomashi: Mater. Sci. Eng. A, 2006, vol. 432, pp. 71–83.10.1016/j.msea.2006.05.076 ↗
36. U. Hecht and S. Rex: Proc. Int. Conf. on the Science of Casting and Solidification, Brasov, Romania, 2001, pp. 53–59.
37. P. Mikolajczak and L.Ratke: Arch. Foundry Eng., 2013, vol. 13, pp. 79-82.10.2478/afe-2013-0086 ↗
38. L.A. Narayanan, F.H. Samuel and J.E. Gruzleski: Metall. Mater. Trans. A, 1994, vol. 25, pp. 1761-1773.10.1007/BF02668540 ↗
39. D.N. Miller, L. Lu and A.K. Dahle: Metall. Mater. Trans. B, 2006, vol. 37, pp. 873-878.10.1007/BF02735008 ↗
40. Y.H. Cho, H.C. Lee, K.H. Oh and A.K. Dahle: Metall. Mater. Trans. A, 2008, vol. 39, pp. 2435-2448.10.1007/s11661-008-9580-8 ↗
41. K. Nogita, S.D. McDonald, K. Tsujimoto, K. Yasuda, and A.K. Dahle: J. Electron Microsc., 2004, vol. 53, pp. 361–69.10.1093/jmicro/dfh048 ↗
42. X. Cao and J. Campbell: Metall. Mater. Trans. A, 2003, vol. 34, pp. 1409-1420.10.1007/s11661-003-0253-3 ↗
43. L. Lu and A.K. Dahle: Metall Mater Trans A, 2005, vol. 36, pp. 819-835.
44. S. Nafisi and R. Ghomashchi: J. Alloys Compd. 2007, vol. 436, pp. 86-90.10.1016/j.jallcom.2006.07.046 ↗
45. J. Taylor: Proc. Mater. Sci., 2012, vol. 1, pp. 19–33.10.1016/j.mspro.2012.06.004 ↗
46. S. Steinbach and L. Ratke: Int. J. Cast Met. Res., 2009, vol. 22, pp. 290-293.10.1179/136404609X367920 ↗
47. C. Puncreobutr, A.B Phillion, J.L. Fife and P.D. Lee: Acta Mater. 2014, vol. 64, pp. 316-325.10.1016/j.actamat.2013.10.044 ↗
48. W. Kurz and D.J. Fisher, Fundamentals of solidification, Trans. Tech. Publications, Switzerland, 1986.
49. J.A. Dantzig and M. Rappaz, Solidification, EPFL Press, Switzerland 2009.10.1201/9781439808030 ↗
50. A. Das, S. Ji and Z. Fan, Acta Mater., 2002, vol 50, pp. 4571-4585.10.1016/S1359-6454(02)00305-1 ↗
51. S. Nafisi and R. Ghomashchi: Mater. Sci. Eng. A, 2006, vol. 437, pp. 388–395.10.1016/j.msea.2006.07.135 ↗
52. X. Li, Y. Fautrelle and Z. Ren: Acta Mater., 2008, vol. 56, pp. 3146-3161.10.1016/j.actamat.2008.03.018 ↗
53. M.C. Flemings: Solidification Processing, McGraw Hill, New York, 1974.