The microstructural, mechanical, and fracture properties of austenitic stainless steel alloyed with gallium
Source abstract
Abstract
Abstract Diffusion of Ga into austenitic stainless steel storage containers housing plutonium-gallium compounds is likely during fifty-year storage at temperatures as high as 250°C. Thus, the mechanical and fracture properties of austenitic stainless steels alloyed with gallium require assessment in order to determine the likelihood of premature failure following Ga uptake. AISI 304 L SS (UNS S30403) was cast with 1,3, and 12 wt % Ga. Increased Ga concentration promoted duplex microstructure formation with the ferritic phase having a nearly identical composition to the austenitic phase. Room temperature tests indicated that small additions of Ga (less than 3 wt%) were beneficial to the mechanical behavior of 304 L SS but that 12 wt% Ga resulted in a 95% loss in ductility. Small additions of Ga are beneficial to the cracking resistance of stainless steel also. 3 wt% Ga alloys showed the greatest resistance to crack initiation and propagation as measured by fatigue crack growth rate, fracture toughness, and tearing modulus. 12 wt% Ga alloys were least resistant to crack initiation and propagation and these alloys failed by transgranular cleavage. It is hypothesized that the embrittlement is attributable to composition (i.e., Ga in solid solution) and not microstructure (i.e., the presence of ferrite), per se.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Department of Energy Report No. DOE-STD-3013-00, United States Department of Energy, Washington, DC, Sept. 2000.
2. K.A. Narh, V.P. Dwivwdi, J.M. Grow, A. Stana, and W.-Y. Shih: J. Mater. Sci., 33, 329 (1998).10.1023/A:1004359410957 ↗
3. P.R. Luebbers, W.F. Michaud, and O.K. Chopra: Argonne National Laboratory Report No. ANL-93/31, Argonne National Laboratory, Argonne, IL, Dec. 1993.
4. F. Barbier and J. Blanc: J. Mater. Res., 1999, vol. 14, p. 737.10.1557/JMR.1999.0099 ↗
5. ASM Specialty Handbook: Stainless Steels, J.R. Davis, ed., ASM INTERNATIONAL, Materials Park, OH, 1994.
6. L. Colombier and J. Hochmann: Stainless and Heat Resisting Steels, St. Martin’s Press, New York, NY, 1968.
7. D.G. Kolman, T.N. Taylor, Y.S. Park, M. Stan, D.P. Butt, C.J. Maggiore, J.R. Tesmer, and G.J. Havrilla: Oxid. Met., 2001, vol. 55, p. 439.10.1023/A:1010303730571 ↗
8. D.G. Kolman and G.J. Havrilla: Chemistry and Electrochemistry of Stress Corrosion Cracking: A Symposium Honoring the Contributions of R.W. Staehle, R.H. Jones, ed., TMS, Warrendale, PA, 2001, pp. 635–48.
9. D.G. Kolman and R. Chavarria: Corrosion, 2004, vol. 60, p. 254.10.5006/1.3287729 ↗
10. Annual Book of ASTM Standards, Designation E8-96, ASTM, Philadelphia, PA, 1996, vol. 3.01, p. 55.
11. Annual Book of ASTM Standards, Designation E813-89, ASTM, Philadelphia, PA, 1996, vol. 3.01, p. 633.
12. Annual Book of ASTM Standards, Designation E1152-95, ASTM, Philadelphia, PA, 1996, vol. 3.01, p. 750.
13. Annual Book of ASTM Standards, Designation E399-90, ASTM, Philadelphia, PA, 1996, vol. 3.01, p. 407.
14. D.G. Kolman and R. Chavarria: J. Testing Evaluation, 2002, vol. 30, p. 452.10.1520/JTE12336J ↗
15. B.A. Benson and R.G. Hoagland: Scripta Metall., 1989, vol. 23, p. 1943 (1989).10.1016/0036-9748(89)90487-0 ↗
16. B. Cox and Y.M. Wong: J. Nucl. Mater., 1997, vol. 245, p. 34.10.1016/S0022-3115(96)00752-0 ↗
17. Metals Handbook H.E. Boyer and T.L. Gall, eds., ASM, Metals Park, OH, 1985, pp. 15–16.
18. ASM Specialty Handbook, Stainless Steels, J.R. Davis, ed., ASM INTERNATIONAL, Materials Park, OH, pp. 32–34.
19. C.H. Sump and G.C. Bodine: in Duplex Stainless Steels, R.A. Lula, ed., ASM INTERNATIONAL, Metals Park, OH, 1983, p. 71.
20. J.E. Truman and K.R. Pitt: in Duplex Stainless Steels, R.A. Lula, ed., ASM INTERNATIONAL, Metals Park, OH, 1983, p. 113.
21. G. Herbsleb and P. Schwaab: in Duplex Stainless Steels, R.A. Lula, ed., ASM INTERNATIONAL, Metals Park, OH, 1983, p. 15.
22. P.D. Southwick and R.W.K. Honeycombe: Met. Sci., 1980, vol. 14, p. 253.10.1016/0036-9748(80)90104-0 ↗
23. ASM Specialty Handbook, Stainless Steels, J.R. Davis, ed., ASM INTERNATIONAL, Materials Park, OH, p. 72.
24. D.J. Kotecki: in Duplex Stainless Steels, R.A. Lula, ed., ASM INTERNATIONAL, Metals Park, OH, 1983, p. 415.
25. T.G. Gooch: in Duplex Stainless Steels, R.A. Lula, ed., ASM INTERNATIONAL, Metals Park, OH, 1983, p. 573.
26. H.D. Solomon and T.M. Devine: in Duplex Stainless Steels, R.A. Lula, ed., ASM INTERNATIONAL, Metals Park, OH, 1983, p. 693.
27. G.A. Young, Jr. and J.R. Scully: Corrosion, 1994, vol. 50, p. 919.10.5006/1.3293483 ↗
28. N.R. Moody and F.A. Greulich: Scripta Metall., 1985, vol. 19, p. 1107.10.1016/0036-9748(85)90018-3 ↗