journal article·2013-03

Kinetics of Martensite Formation in Substitutional Fe-Al Alloys: Dilatometric Analysis

Yongchang Liu, Lifang Zhang, Ferdinand Sommer, Eric Jan Mittemeijer

Publisher page

Abstract

High-resolution differential dilatometry was employed to study the kinetics of the martensite formation upon isochronal cooling/quenching of substitutional Fe-(0.5, 0.7, and 1.0) at. pct Al alloys at fast cooling/quenching rates in the range of 17 K (17 °C) through 100 K (100 °C) s−1, with an emphasis on the as-yet unexpected influence of cooling/quenching rate. The martensite transformation initiated at nearly the same temperature (i.e., the $$ M_{\text{S}} $$ temperature) in the ferrite-phase region for all cooling/quenching rates applied, which indicates athermal nucleation: the chemical driving force governs the initiation of the nucleation of the martensite plates. Variation of the cooling/quenching rates revealed two principal kinetic features: both the temperature ranges passed during transformation and the grain size of the product martensite increase with the increase of cooling/quenching rates. A modular phase-transformation model, incorporating a classic partitioning analysis for nucleation and anisotropic growth for impingement, has been employed to extract the velocity of the migrating martensite/austenite interface from the dilatometric data. The thus obtained velocity of the martensite/austenite interface as function of temperature indicates a thermally activated growth governed by relatively lower activation energy, as determined by evaluation of the martensite-formation-rate maximum as function of cooling/quenching rate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. A. Borgenstam and M. Hillert: Acta Mater., 2000, vol. 48, pp.2777-2785.10.1016/S1359-6454(00)00101-4 ↗
2. M. Grujicic, G.B. Olson and W.S. Owen: Metall. Trans. A, 1985, vol. 16 A, pp. 1713-1722.10.1007/BF02670359 ↗
3. Z.S. Basinski and J.W. Christian: Acta metal., 1954, vol. 2, pp.148-166.10.1016/0001-6160(54)90104-2 ↗
4. H.S. Yang and H.K.D.H. Bhadeshia: Scripta mater., 2009, vol. 60, pp. 493-495.10.1016/j.scriptamat.2008.11.043 ↗
5. V.I. Levitas and A.V. Idesman: Philo. Mag. A, 2002, vol. 82, pp. 429-462.10.1080/01418610208239609 ↗
6. S.M.C. van Bohemen, J. Sietsma, M.J.M. Hermans, I.M. Richardson (2003) Acta Mater. 51:4183–4196.10.1016/S1359-6454(03)00236-2 ↗
7. Y. Zhao, J.H. Zhang and T.Y. Hsu. J. Appl. Phys., 2000, vol.88, pp.4022-4025.10.1063/1.1288164 ↗
8. P.R. Rios and J.R.C. Guimaraes: Scripta mater., 2007, vol.57, pp.1105-1108.10.1016/j.scriptamat.2007.08.019 ↗
9. V.S. Warke, R.D. Sisson Jr., and M.M. Makhlouf: Metall. Mater. Trans. A 2009, vol. 40 A, pp. 569-572.10.1007/s11661-008-9727-7 ↗
10. R.C. Pond and S. Celotto: Inter. Mater. Rev., 2003, vol. 48, pp.225-252.10.1179/095066003225010245 ↗
11. Z. Nishiyama (1978) Martensitic Transformation. Academic press, New York
12. E.P. Paradakis: J. Appl. Phys., 1964, vol. 35, pp.1474-1482.10.1063/1.1713652 ↗
13. F.J. Schoen and W.S. Owen: Metall. Trans. A, 1971, vol. 2, pp.2431-2444.10.1007/BF02814880 ↗
14. D.P. Koistinen and R.E. Marburger: Acta metal., vol.7, 1959, pp. 59-60.10.1016/0001-6160(59)90170-1 ↗
15. H.K.D.H. Bhadeshia, S.R. Honeycombe (2006) Steels: Microstructure and Properties. Butterworths-Heinemann, U.K., p. 95.10.1016/B978-075068084-4/50007-8 ↗
16. A.P. Gulyaev and M.A. Guzovskaya: Metal Science and Heat Treatment, 1977, vol. 19, pp. 425-428.10.1007/BF00713074 ↗
17. S.M.C. van Bohemen, J. Sietsma (2009) Mater. Sci. Technol. 25:1009-1012.10.1179/174328408X365838 ↗
18. M. Izumiyama, M. Tsuchiya and Y. Imai: J. Jpn. Inst. Met., 1970, vol. 34, pp. 291-301.10.2320/jinstmet1952.34.3_291 ↗
19. Y.C. Liu, F. Sommer and E.J. Mittemeijer. Acta Mater., 2009, vol. 57, pp. 2858-2868.10.1016/j.actamat.2009.02.044 ↗
20. G. Mohapatra, F. Sommer and E.J. Mittemeijer: Thermochimica Acta, 2007. vol. 453, pp. 57-66.10.1016/j.tca.2006.11.009 ↗
21. Y.C. Liu, F. Sommer and E.J. Mittemeijer: Thermochimica Acta, 2004, vol. 413, pp. 215-225.10.1016/j.tca.2003.10.005 ↗
22. ASTME (1988) Annual Book of ASTM Standards, vol. 03.01. ASTM, West Conshohocken, PA, p. 297.
23. Y.C. Liu, F. Sommer and E.J. Mittemeijer: Acta Mater., 2003, vol. 51, pp. 507-519.10.1016/S1359-6454(02)00434-2 ↗
24. V. Rigaud, B. Sundman, D. Daloz and G. Lesoult. CALPHAD, 2009, vol. 33, pp.442-449.10.1016/j.calphad.2009.05.003 ↗
25. A.T.W. Kempen, F. Sommer and E.J. Mittemeijer: Acta Mater., 2002, vol.50, pp. 3545-3555.10.1016/S1359-6454(02)00149-0 ↗
26. E.J. Mittemeijer and F Sommer: Z. Metallkd, 2002, vol. 93, pp. 352-361.10.3139/146.020352 ↗
27. F. Liu, F. Sommer, C. Bos and E.J. Mittemeijer: Inter. Mater. Rev., 2007, vol. 52, pp. 193-211.10.1179/174328007X160308 ↗
28. E.J. Mittemeijer: Fundamentals of Materials Science, Springer, Heidelberg (2010).
29. A.L. Roytburd (1999) Mater. Sci. Eng. 273:1–20.10.1016/S0921-5093(99)00285-3 ↗
30. J.C. Fisher, J.H. Hollomon and D. Turnbull: Metals Trans., 1949, vol. 185, pp. 691-700.
31. J.R.C. Guimaraes and P.R. Rios: Metall Mater Trans A, 2011, vol. 42, pp. 2937-2940.10.1007/s11661-011-0840-7 ↗
32. M.J. Starink: J. Mater. Sci., 2001, vol. 36, pp. 4433-4441.10.1023/A:1017974517877 ↗
33. F. Liu, S.J. Song, F. Sommer and E.J. Mittemeijer: Acta mater., 2009, vol. 57, pp. 6176-6190.10.1016/j.actamat.2009.08.046 ↗
34. F. Liu, S.J. Song, F. Sommer and E.J. Mittemeijer. Acta mater., 2010, vol. 58, pp. 2291.10.1016/j.actamat.2009.11.023 ↗
35. Y.C. Liu, F. Sommer and E.J. Mittemeijer: Phil. Mag. A, 2004, vol. 84, pp. 1853-1876.10.1080/14786430410001663178 ↗
36. Y.C. Liu, F. Sommer and E.J. Mittemeijer: Acta Mater., 2004, vol. 52, pp. 2549-2560.10.1016/j.actamat.2004.02.003 ↗
37. T. Watanabe, K. Obara, S. Tsurekawa and G. Gottstein: Z. Metallkde., 2005, vol. 96, pp. 1196-1203.10.3139/146.101162 ↗
38. V. Novak, S. Kadeckova and P. Lejcek: Scripta Metall. Mater. 1993; 28: 139-144.10.1016/0956-716X(93)90551-3 ↗
39. M. Grujicic, H.C. Ling, D.M. Haezebrouck, W.S. Owen (1992) Martensite, Chap. 10. ASM International, USA, p. 175.
40. E.I. Estrin: Bulletin of the Russian Academy of Sciences: Physics, 2009, vol. 73, 1173-1179.10.3103/S1062873809090019 ↗
41. G.P. Krielaart and S. van der Zwaag: Mater. Sci. & Techno., 1998, vol. 14, pp.10-18.10.1179/026708398790301755 ↗
42. Y.C. Liu, D.J. Wang, F. Sommer, EJ Mittemeijer (2008) Acta Mater. 56:3833–42.10.1016/j.actamat.2008.04.015 ↗
43. D.A. Karlyn, J.W. Cahn, M Cohen (1969) Trans. Metall. Soc. AIME. 245:197–207.
44. Y.C. Liu, F. Sommer, E.J. Mittemeijer (2008) Metall Mater Trans A 39:2306–2318.10.1007/s11661-008-9601-7 ↗
45. J.R.C. Guimaraes, J.G. Gomes (1982) In: H.I. Aaronson, D.E. Laughlin, R.F. Sekerka, C.M. Wayman (eds) Solid-solid phase transformation. TMS-AIME, Warrendale, PA, pp. 1415–1419.