A Phenomenological Model (and Experiments) for Liquid Phase Sintering
Source abstract
Abstract
Two problems in liquid phase sintering (LPhS) are analyzed. In the first case, the densification obtained from particle rearrangement is related to the volume fraction of the liquid phase and the solubility of the solid in the liquid. The model is based upon the assumption that particle rearrangement is related to the dissolution of the solid into the liquid. Sintering experiments carried out with salt particles and water support the results from the model. These experiments provide further insights into the influence of particle size on densification. In the second problem, the kinetics of densification by particle rearrangement is related to the rate of dissolution of the solid into the liquid. These results are compared to the kinetics of densification by the solution-precipitation mechanism, which is shown to be much slower than particle rearrangement. The results from the two problems are then combined to delineate the regimes of particle rearrangement (stage I) and solution-precipitation (stage II) mechanisms. The implication of the contact angle on sintering behavior is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. J.L. Johnson, R.M. German: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 901–0910.1007/s11663-996-0003-1 ↗
2. S.H. Hong, J.H. Ryu: Mater. Sci. Eng. A, 2003, vol. 344 (1–2), pp. 253–6010.1016/S0921-5093(02)00410-0 ↗
3. J. Svoboda, H. Riedel, R. Gaebel: Acta Mater., 1996, vol. 44 (8), pp. 3215–2610.1016/1359-6454(95)00440-8 ↗
4. P.E. McHugh, H. Riedel: Acta Mater., 1997, vol. 45 (7), pp. 2995–3003.10.1016/S1359-6454(96)00378-3 ↗
5. S.M. Lee, S.J.L. Kang: Acta Mater., 1998, vol. 46 (9), pp. 3191–320210.1016/S1359-6454(97)00489-8 ↗
6. W.J. Huppman, R. Riegger: Acta Metall., 1975, vol. 23, pp. 965–7110.1016/0001-6160(75)90010-3 ↗
7. K. Xu, M.M. Mehrabadi: Mech. Mater., 1997, vol. 25 (2), pp. 137–5710.1016/S0167-6636(96)00048-8 ↗
8. J. Aldazabal, A. Martin-Mizoso, J.M. Martinez-Esnaola: Mater. Sci. Eng. A, 2003, vol. 365 (1–2), pp. 151–55
9. R.L. Coble: J. Appl. Phys., 1963, vol. 34, pp. 1679–8210.1063/1.1702656 ↗
10. R. Raj, C.K. Chyung: Acta Metall, 1981, vol. 29 (1), pp. 159–6610.1016/0001-6160(81)90096-1 ↗
11. W.J. Huppmann, G. Petzow: in H. Hausner, P.W. Taubenblat, eds., Modern Developments in Powder Metallurgy, vol. 9, Metal Powder Industries Federation, Princeton, NJ, 1977, pp. 77–89
12. G. Petzow, W.A. Kaysser: in G.S. Upadhyaya, ed., Sintered Metal-Ceramic Composites, Elsevier Science Publishers, Amsterdam, 1984, pp. 50–70 (included in Ref. 19)
13. W.D. Kingery, M. Berg: J. Appl. Phys., 1955, vol. 26 (10), pp. 1205–12 (included in Ref. 19)10.1063/1.1721874 ↗
14. R.L. Coble: J. Appl. Phys., 1961, vol. 32 (5), pp. 787–92 (included in Ref. 23)10.1063/1.1736107 ↗
15. R. Raj: J. Am. Ceram. Soc., 1981, vol. 64, pp. 245–4810.1111/j.1151-2916.1981.tb09596.x ↗
16. R.M. German: Liquid Phase Sintering, Plenum Press, New York, NY, 1985, p. 2610.1007/978-1-4899-3599-1 ↗
17. W.J. Wu, G.H. Nancollas: Adv. Coll. Interface Sci., 1999, vol. 79 (2–3), pp. 229–7910.1016/S0001-8686(98)00072-4 ↗
18. M. Aizenshtein, N. Froumin, N. Frage, M.P. Dariel: Mater. Sci. Eng. A, 2005, vol. 395 (1–2), pp. 180–8510.1016/j.msea.2004.12.017 ↗
19. Z. Yuan, W.L. Huang, K. Mukai: Appl. Phys. A–Mater. Sci. Process., 2004, vol. 78 (4), pp. 617–2210.1007/s00339-002-2001-8 ↗
20. A.V. Durov, Y.V. Naidich, B.D. Kostyuk: J. Mater. Sci., 2005, vol. 40 (9–10), pp. 2173–7810.1007/s10853-005-1928-5 ↗
21. G. Ghosh: J. Electron. Mater., 2004, vol. 33 (10), pp. 1081–9110.1007/s11664-004-0108-8 ↗
22. A. Bohm, T. Weissgarber, G. Lotze, B. Kieback: Int. J. Powder Metall., 2003, vol. 39 (8), pp. 11–12
23. Sintering Key Papers, S. Somiya and Y. Moriyoshi, eds., Elsevier Applied Science, New York, NY, 1990
24. W.D. Kingery, E. Niki, M.D. Narasimhan: J. Am. Ceram. Soc., 1961, vol. 44 (1), pp. 29–35 (included in Ref. 15).10.1111/j.1151-2916.1961.tb15343.x ↗
25. R. Raj: J. Am. Ceram. Soc. 1982, vol. 65 (3), pp. C46–C4610.1111/j.1151-2916.1982.tb10397.x ↗
26. B. Matovic: Ph.D. Thesis, University of Stuttgart, Stuttgart, Germany, 2003
27. B. Matovic, G. Rixecker, F. Aldinger: J. Am. Ceram. Soc., 2004, vol. 87, pp. 546–4910.1111/j.1551-2916.2004.00546.x ↗
28. R. Raj, M.F. Ashby: Acta Metall., 1975, vol. 23, pp. 653–6610.1016/0001-6160(75)90047-4 ↗
29. R. Raj, H.H. Shih, H.H. Johnson: Scripta Metall., 1977, vol. 11, pp. 839–4210.1016/0036-9748(77)90333-7 ↗
30. R. Raj: J. Am. Ceram. Soc., 1987, vol. 70 (9), pp. C210–C21110.1111/j.1151-2916.1987.tb05743.x ↗