Strength and ductility of heavily drawn bundled Cu-Nb filamentary microcomposite wires with various Nb contents
Source abstract
Abstract
The strength and ductility of heavily drawn bundled Cu-Nb filamentary microcomposite was examined as a function of Nb content. In order to predict the variation of the yield strength (YS) with Nb content, the interfilamentary spacing was calculated as a function of Nb content based on the assumption that Nb filaments are distributed regularly along the sides of a triangular unit cell in the transverse section. The yield stress can be described as the sum of the substructure strengthening component due to elongated grains, subgrains and/or cells, the phase boundary strengthening term associated with the Hall-Petch type interaction between dislocations and phase boundaries, and the precipitate strengthening component. The contributions from phase boundary strengthening, σPB (Cu-Nb), and precipitate strengthening, σppt, increase with increasing Nb content. However, the contribution from substructure strengthening, σsub (Cu-Nb), decreases with increasing Nb content since more grain or subgrain boundaries are absorbed at Cu/Nb phase boundaries with increasing Nb content. The good agreement between the prediction and the experimental data suggests that the increase of the strength in Cu-Nb filamentary microcomposite with increasing Nb content results mostly from an increasing volume fraction of Nb filaments, which act as barriers to plastic flow.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. W.A. Spitzig: Scripta Metall., 1989, vol. 23, pp. 1085–90.10.1016/0036-9748(89)90304-9 ↗
2. W.A. Spitzig and P.D. Krotz: Acta Metall., 1988, vol. 36, pp. 1709–15.10.1016/0001-6160(88)90238-6 ↗
3. J.D. Verhoeven, L.S. Chumbley, F.C. Laabs, and W.A. Spitzig: Acta Metall. Mater., 1991, vol. 39, pp. 2825–34.10.1016/0956-7151(91)90100-F ↗
4. P.D. Funkenbusch and T.H. Courtney: Scripta Metall., 1989, vol. 23, pp. 1719–24.10.1016/0036-9748(89)90349-9 ↗
5. T.H. Courtney: in Metal Matrix Composites: Processing and Interfaces, R.K. Everett and R.J. Arsenault, eds., Academic Press, San Diego, CA, 1991, p. 101.
6. C.L. Trybus and W.A. Spitzig: Acta Metall., 1989, vol. 37, pp. 1971–81.10.1016/0001-6160(89)90081-3 ↗
7. W.A. Spitzig, J.D. Verhoven, C.L. Trybus, and L.S. Chumbley: Scripta Metall. Mater., 1990, vol. 24, pp. 1181–82.10.1016/0956-716X(90)90323-9 ↗
8. W.A. Spitzig, C.L. Trybus, and J.D. Verhoeven: in Metal Matrix Composites: Mechanisms and Properties, R.K. Everett and R.J. Arsenault, eds., Academic Press, San Diego, CA, 1991, p. 151.
9. P.D. Funkenbusch and T.H. Courtney: Scripta Metall. Mater., 1990, vol. 24, pp. 1175–80.10.1016/0956-716X(90)90322-8 ↗
10. J. Bevk, J.P. Harbison, and J.L. Bell: J. Appl. Phys., 1978, vol. 49, pp. 6031–39.10.1063/1.324573 ↗
11. J.D. Verhoeven, H.L. Dowing, L.S. Chumbley, and E.D. Gibson: J. Appl. Phys., 1989, vol. 65, pp. 1293–1301.10.1063/1.343024 ↗
12. C. Biselli and D.G. Morris: Acta Metall. Mater., 1994, vol. 42, pp. 163–76.10.1016/0956-7151(94)90059-0 ↗
13. C. Biselli and D.G. Morris: Acta Metall. Mater., 1996, vol. 44 pp. 493–504.10.1016/1359-6454(95)00212-X ↗
14. U. Hangen and D. Raabe: Acta Metall. Mater., 1995, vol. 43, pp. 4075–82.10.1016/0956-7151(95)00079-B ↗
15. S.I. Hong and M.A. Hill: Acta Metall. Mater., 1998, vol. 46, pp. 4111–22.10.1016/S1359-6454(98)00106-2 ↗
16. S.I. Hong and M.A. Hill: Mater. Sci. Eng. A, 2000, vol. 281, pp. 189–97.10.1016/S0921-5093(99)00728-5 ↗
17. S.I. Hong: Scripta Mater., 1998, vol. 39, pp. 1685–91.10.1016/S1359-6462(98)00383-2 ↗
18. W.A. Spitzig, F.C. Laabs, H.L. Downing, and C.V. Renaud: Mater. Manufacturing Processes, 1992, vol. 7, pp. 1–13.10.1080/10426919208947395 ↗
19. W.A. Spitzig, H.L. Downing, F.C. Laabs, E.D. Gibson, and J.D. Verhoeven: Metall. Trans. A, 1993, vol. 24A, pp. 7–14.10.1007/BF02669596 ↗
20. L.S. Chumbley, H.L. Dowing, W.A. Spitzig, and J.D. Verhoeven: Mater. Sci. Eng., 1989, vol. A117, pp. 59–65.10.1016/0921-5093(89)90086-5 ↗
21. A.R. Pelton, F.C. Laabs, W.A. Spitzig, and C.C. Cheng: Ultramicroscopy, 1987, vol. 22, pp. 251–66.10.1016/0304-3991(87)90069-6 ↗
22. C.L. Trybus, L.S. Chumbly, W.A. Spitzig, and J.D. Verhoeven: Ultramicroscopy, 1989, vol. 22, pp. 315–20.10.1016/0304-3991(89)90060-0 ↗
23. W.A. Spitzig, A.R. Pelton, and F.C. Laabs: Acta Metall., 1987, vol. 35, pp. 2427–42.10.1016/0001-6160(87)90140-4 ↗
24. S.I. Hong and M.A. Hill: Scripta Mater., 2000, vol. 42, pp. 737–42.10.1016/S1359-6462(99)00423-6 ↗
25. S.I. Hong and M.A. Hill: “Mechanical and Nicrostructural Stability of Cu-Nb Microcomposites,” LANL Report No. LA-UR-0440, Los Alamos National Laboratory, Los Alamos, NM.
26. P.D. Krotz, J.A. Fint, J.L. Yuen, and N.E. Paton: Mater. Sci. Eng., 1992, vol. A149, pp. 225–29.10.1016/0921-5093(92)90383-C ↗
27. A. Bengalem and D.G. Morris: Mater. Sci. Eng., 1993, vol. A161 pp. 255–66.10.1016/0921-5093(93)90520-O ↗
28. L.E. Murr: Interfacial Phenomena in Metals and Alloys, Addison-Wesley, London, 1975, p. 242.
29. T.W. Ellis, I.E. Anderson, H.L. Downing, and J.D. Verhoeven: Metall. Trans. A, 1993, vol. 24A, pp. 21–26.10.1007/BF02669598 ↗
30. J.B. Correia, H.A. Davies, and C.M. Sellars: Acta Mater., 1997, vol. 45, pp. 177–90.10.1016/S1359-6454(96)00142-5 ↗
31. S.I. Hong, M.A. Hill, Y. Sakai, J.T. Wood, and J.D. Embury: Acta Metall. Mater., 1995, vol. 43, pp. 3313–23.10.1016/0956-7151(95)00050-6 ↗
32. C.V. Renaud, E. Gregory, and J. Wong: Adv. Cryo. Eng., 1996, vol. 23, pp. 443–49.