journal article·2007-09

A Geometric Framework for Mesoscale Models of Recrystallization

J.P. Thomas, F. Montheillet, S.L. Semiatin

Publisher page

Abstract

Geometric aspects are a major issue in models of recrystallization that rely on statistical grain-population descriptions, because the growth of recrystallized grains has to be compensated by the loss of volume of deformed grains, thus leading to concomitant variations in all geometric variables. A geometric framework for such models was thus designed. It is based on mesostructure units (MSUs), each of which represents an aggregate of similar grains. The evolution of MSUs is controlled by two kinds of inputs, nucleation rates and grain-boundary velocities, from which the evolution of microstructure is described in an internally consistent fashion. The geometric framework was applied initially to the necklace recrystallization of fine-grain microstructures, viz., the usual form of recrystallization comprising nucleation on initial grain boundaries. It was extended to describe particle-stimulated nucleation (PSN) in order to treat geometric effects related to intragranular recrystallization, as is found in coarse ingot microstructures. For both the necklace-only and necklace-and-PSN cases, test cases using simple inputs were performed to validate the behavior of the geometric framework.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. D. Zhao, C. Cheng, R. Anbajagane, H. Dong, and F.S. Suarez: in Superalloys 718, 625, 706, and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1997, pp. 163–72
2. J.T. Yeom, C.S. Lee, J.H. Kim, N.K. Park: Mater. Sci. Eng. A, 2007, vols. A449–A451, pp. 722–2610.1016/j.msea.2006.02.415 ↗
3. H.S. Zurob, C.R. Hutchinson, Y. Brechet, G. Purdy: Acta Mater., 2002, vol. 50,pp. 3075–9210.1016/S1359-6454(02)00097-6 ↗
4. G. Shen, S.L. Semiatin, R. Shivpuri: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1795–180310.1007/BF02670767 ↗
5. J.P. Thomas, E. Bauchet, C. Dumont, and F. Montheillet: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 959–6810.7449/2004/Superalloys_2004_959_968 ↗
6. A.D. Rollett, M.J. Luton, D.J. Srolovitz: Acta Metall., 1992, vol. 40, pp 43–5510.1016/0956-7151(92)90198-N ↗
7. R.L. Goetz, V. Seetharaman: Scripta Mater., 1998, vol. 38, pp. 405–1310.1016/S1359-6462(97)00500-9 ↗
8. X. Song and M. Rettenmayr: Comput. Mater. Sci., 2007, in press
9. B. Marty, J.Y. Guedou, P. Gergaud, and J.L. Lebrun: in Superalloys 718, 625, 706, and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1997, pp. 331–4210.7449/1997/Superalloys_1997_331_342 ↗
10. C. Sommitsch, V. Wieser, S. Kleber: J. Mater. Process. Technol., 2002, vols. 125–126,pp. 130–3710.1016/S0924-0136(02)00359-X ↗
11. P. Poelt, C. Sommitsch, S. Mitsche, M. Walter: Mater. Sci. Eng. A, 2006, vol. A420,pp. 306–1410.1016/j.msea.2006.01.076 ↗
12. F. Montheillet: Proc. 4th Int. Conf. on Recrystallization and Related Phenomena (Rex’99), T. Sakai and H.G. Suzuki, eds., Japan Institute of Metals, Sendai, Japan, 1999, pp. 651–58
13. A. Di Shino and G. Abbruzese: Proc. 1st Joint Int. Conf. on Recrystallization and Grain Growth, G. Gottstein and D.A. Molodov, eds., Springer Verlag, Berlin, 2001, pp. 1021–26
14. S.L. Semiatin, D.S. Weaver, P.N. Fagin, M.G. Glavicic, R.L. Goetz, N.D. Frey, R.C. Kramb, M.M. Anthony: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 679–9310.1007/s11661-004-0379-y ↗
15. F.J. Humphreys: Scripta Mater., 2000, vol. 43, pp. 591–9610.1016/S1359-6462(00)00442-5 ↗
16. R.L. Goetz: Scripta Mater., 2005, vol. 52, pp. 851–5610.1016/j.scriptamat.2005.01.012 ↗