Spheroidization of Eutectic Silicon in Direct-Electrolytic Al-Si Alloy
Source abstract
Abstract
The spheroidization process of direct-electrolytic Al-Si alloy (DEASA) containing Si content in the range of 7 to 12 pct heated at temperatures of 778 K to 803 K (505 °C to 530 °C) was studied. The width, length, and aspect ratio of Si particles were measured to quantitatively analyze the microstructural variety of Si phase during the heating process in terms of chemical composition and remelting. Compared to existing Al-Si alloy, the lower soaking temperature of 778 K to 783 K (505 °C to 510 °C) is required to obtain the full spheroidization of the Si phase of DEASA. When remelting DEASA, a satisfactory granulation rate can be achieved at a higher soak temperature of 788 K to 803 K (515 °C to 530 °C). The origin of the high spheroidizaton rate is attributed to the microstructural characteristic relative to the electrolysis process. It would be expected that high crystallographic defects of Si grain result in the complete spheroidization of Si phase at lower temperatures for a short period.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Semiconductor materials and interfaces · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. C.W. Meyers: AFS Trans., 1985, vol. 93, pp. 741–50.10.1016/0040-6031(85)85186-8 ↗
2. J.E. Gruzleski and B.M. Closset: The Treatment of Liquid Aluminum-Silicon Alloys, The American Foundrymen’s Society, Inc., Des Plaines, IL, 1990, pp. 25–55.
3. E. Ogris, H. Lüchinger, and P.J. Uggowitzer: Mater. Sci. Forum, 2002, vol. 396–402, pp. 149–54.10.4028/www.scientific.net/MSF.396-402.149 ↗
4. V. Páramov, R. Colás, E. Velasco, and S. Valtierra: J. Mater. Eng. Performance, 2000, vol. 9, pp. 616–22.10.1361/105994900770345467 ↗
5. D. Apelian, S. Shivkumar, and G. Sigworth: AFS Trans., 1989, vol. 97, pp. 727–42.
6. S. Shivkumar, S. Ricci, Jr., B. Steenhoff, D. Apelian, and G. Sigworth: AFS Trans., 1989, vol. 97, pp. 791–810.
7. H. Röhrig and E. Kapernick: Aluminium, 1941, vol. 23, pp. 235–39.
8. I.F. Kolobnev: Heat Treatment of Aluminum Alloys, Metallurgy Press, Moscow, 1964, pp. 78–79 (in Russian).
9. J. Paul, H.E. Exner, and D. Müller-Schwelling: Z. Metallkd., 1982, vol. 7, pp. 50–55.
10. P.Y. Zhu O.Y. Liu, and T.X. Hou: AFS Trans., 1985, vol. 93, pp. 609–14.
11. P.Y. Zhu and Q.Y. Liu: Mater. Sci. Technol., 1986, vol. 2, pp. 500–07.10.1179/026708386790328623 ↗
12. F.N. Rhines and F.N. Aballe: Metall. Trans. A, 1986, vol. 17A, pp. 2139–52.10.1007/BF02645912 ↗
13. A. Okada, H. Miyaki, and N. Komatsu: Imono, 1986, vol. 58, pp. 762–67 (in Japanese).
14. H.Y. Yeh, H.G. Yeh, R.Y. Wang, and W.H. Lu: U.S. Patent No 6,261,390 B1, July 17, 2001.
15. R.Y. Wang, W.H. Lu, H.Y. Yeh, and G.H. Yeh: in Light Metals 2003, P.N. Crepeau, ed., TMS, Warrendale, PA, 2003, pp. 1063–69.
16. R.Y. Wang, W.H. Lu, and L.M. Hogan: Mater. Sci. Eng. A, 2003, vol. 348, pp. 289–98.10.1016/S0921-5093(02)00732-3 ↗
17. R.Y. Wang and W.H. Lu: Light Met. Age, 2001, vol. 59, pp. 6–10.
18. G.Q. Yang: Foundry, 1997, vol. 1, pp. 44–46 (in Chinese).10.1002/jccs.199700060 ↗
19. L. Grand: Revue de l’Aluminum, 1952, vol. 29, pp. 5–15.
20. L.F. Mondolfo: Aluminum Alloys Structures and Properties, Butterworth and Co., London, 1979, pp. 513–15, 534–37, 566–75, 592–94, 604, and 617–18.
21. K. Stoffregen: Giesserei, 1985, vol. 72, pp. 545–49.
22. M. Morinaka: The Eutectic Structure Control via Thermal Analysis, Nippon Sublance Probe Engineering Co., Ltd., Toyoda, Japan, 1997, pp. 35–36.
23. Aluminum Casting Technology, 2nd ed., The American Foundrymen’s Society, Inc., Des Plaines, IL, 1993, pp. 42–43.
24. D. Apelian, G.K. Sigworth, and K.R. Whaler: AFS Trans., 1984, vol. 92, pp. 297–307.
25. R.Y. Wang and W.H. Lu: Spec. Cast. Nonferrous Alloys, 1995, vol. 2 (1), pp. 1–5 (in Chinese).
26. E. Werner: Z. Metallkd., 1990, vol. 81, pp. 790–98.
27. H.E. Cline: Acta Metall., 1971, vol. 19, pp. 481–90.10.1016/0001-6160(71)90002-2 ↗
28. I.M. Liftshitz and V.V. Sloyozov: J. Phys. Chem. Solids, 1961, vol. 19, pp. 35–47.10.1016/0022-3697(61)90054-3 ↗
29. V.S. Zolotorevsky, N.A. Belov, and M.V. Glazoff: Casting Aluminum Alloys, Elsevier, New York, NY, 2007, pp. 213–22.
30. S. Mitsuo: Liquid Metals, Academic Press, London, 1977, pp. 41 and 235–36.
31. C.H.P. Lupis: Chemical Thermodynamics Materials, Elsevier, New York, NY, 1983, pp. 441–43.
32. X.F. Bian, W.M. Wang, H. Li, and J.J. Ma: Structure of Metal Melt, Shanghai Jiaotong University Publishing Co., Shanghai, 2003, pp. 60–65 and 84–96 (in Chinese).
33. A.K. Dahle, K. Nogita, J.W. Zindel, S.D. McDonald, and L.M. Hogan: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 949–60.10.1007/s11661-001-0352-y ↗
34. C.E. Cross and D.L. Olson: Weld. J., 1982, vol. 12, pp. 381–87.
35. K.A. Jackson: Liquid Metals and Solidification, ASM, Cleveland, OH, 1958, pp. 174–86.
36. G.H. Gilmer, H.L. Leaming, and K.A. Jackson: Proc. 4th Int. Conf. on Crystal Growth, Amsterdam, North-Holland, 1973, p. 495.10.1016/0022-0248(74)90364-9 ↗
37. I.G. Brodova. P.S. Popel, and G.I. Eskin: Liquid Metal Processing, Application to Aluminium Alloy Production, Taylor and Francis, London, 2002, pp. 86–90 and 105–110.