journal article·2010-07

Effect of Austempering Conditions on the Microstructure and Tensile Properties of Low Alloyed Sintered Steel

M. Campos, J. Sicre-Artalejo, J.J. Muñoz, J.M. Torralba

Publisher page

Abstract

Because of the combination of strength and toughness, much interest has been focused on austempered sintered low-alloyed steels. Implementation of this treatment for powder metal components has been limited by interaction between the open porosity of the material and the cooling fluid. This work discusses the influence of different austempering environments and parameters on the microstructure and, as a consequence, on the final properties. The sintered steels selected are based on two different prealloyed powders, Fe-1.5Cr-0.2Mo and Fe-1.5Mo, with the addition of 0.6 wt pct graphite. Green samples with medium density (7.3 g/cm3) were sintered at 1393 and 1523 K (1120 and 1250 °C) to ensure a decrease in open porosity. The austempering treatment process requires austenitizing at 1133 K (860 °C) for 2 hours followed by quenching in different baths at 563 K (290 °C). The final strength and ductility are dependent upon the relative amounts of ferrite, pearlite, and bainite phases present in the austempered steel. Discussion of the experimental results compares the as-sintered and the austempered observations as well as the relationship between mechanical properties and the phases present in the final microstructures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. G. Krauss: Steels—Heat Treatment and Processing Principles, ASM, Materials Park, PA, 1990, pp. 267–69.
2. B. Bosnjak, B. Verlinden, and B. Radulovic: Mater. Sci. Technol., 2003, vol. 19, pp. 650–56.10.1179/026708303225002947 ↗
3. S.K. Putatunda: Mater. Design, 2003, vol. 24, pp. 435–43.10.1016/S0261-3069(03)00090-6 ↗
4. Z. Li and D. Wu: ISIJ Int., 2006, vol. 46, pp. 121–28.10.2355/isijinternational.46.121 ↗
5. A.R. Mirak and M. Nili-Ahmadabadi: Mater. Sci. Technol., 2004, vol. 20, pp. 897–902.10.1179/026708304225017454 ↗
6. G.F. Bocchini, A. Bagglioli, R. Gerosa, B. Rivolta, and G. Silva: Int. J. Powder Metall., 2004, vol. 40 (5), pp. 57–65.
7. J.H. Yi, T.M. Ye, Y.D. Peng, Q.L. Xia, and H.z. Wang: J. Central South Univ. Technol., 2007, vol. 14, pp. 447–51.10.1007/s11771-007-0087-z ↗
8. S.K. Putatunda: Mater. Design, 2003, vol. 24, pp. 435–43.10.1016/S0261-3069(03)00090-6 ↗
9. Z. Li and D. Wu: ISIJ Int., 2006, vol. 46, pp. 121–28.10.2355/isijinternational.46.121 ↗
10. D. Mandal, M. Ghosh, J. Pal, P.K. De, S. Ghosh Chowdhury, S.K. Das, G. Das, and S. Ghosh: J. Mater. Sci., 2009, vol. 44 (4), pp. 1069–75.10.1007/s10853-008-3203-z ↗
11. G.F. Bocchini: Powder Metall., 1999, vol. 42 (2), pp. 171–80.10.1179/003258999665530 ↗
12. M. Campos and J.M. Torralba: Surf. Coat. Technol., 2004, vol. 182, pp. 351–62.10.1016/j.surfcoat.2003.07.007 ↗
13. M.A. Doheim and R.M. Himmo: Mater. Sci. Technol., 1988, vol. 4, pp. 371–76.10.1179/mst.1988.4.4.371 ↗
14. W.M. Gao, J.M. Long, L.X. Kong, and P.D. Hodgson: ISIJ Int., 2004, vol. 44, pp. 869–77.10.2355/isijinternational.44.869 ↗
15. S. Yamamoto: ISIJ Int., 1995, vol. 35, p. 1020.10.2355/isijinternational.35.1020 ↗
16. H.K.D.H. Bhadeshia: Bainite in Steels, The Institute of Materials, London, 1992, pp. 191–94.
17. H.G. Lambers, S. Tschumak, H.J. Maier, and D. Canadinc: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1355–66.10.1007/s11661-009-9827-z ↗
18. Höganäs AB technical information, Höganäs, Sweden.
19. K.W. Andrews: JISI J. Iron Steel Inst., 1965, vol. 203, pp. 721–27.
20. M. Campos, S. Kremel, T. Puscas, J.M. Torralba, H. Danninger, and A. Molinari: PM2000: World Congress on Powder Metallurgy, K. Kosuge and H. Nagai, eds., Japan Society of Powder and Powder Metallurgy, Kyoto, 2000, Part 2, pp. 907–13.
21. H. Danninger and C. Gierl: Mater. Chem. Phys., 2001, vol. 67 (1–3), pp. 49–55.10.1016/S0254-0584(00)00419-3 ↗
22. P. Ortiz and F. Castro: Powder Metall., 2004, vol. 47, pp. 3 pp. 291–98.10.1179/003258904225020747 ↗
23. O. Bergman: Powder Metall., 2007, vol. 50 (3), pp. 243–49.10.1179/174329007X205073 ↗
24. H. Karlsson, L. Nyborg, and S. Berg: Powder Metall., 2005, vol. 48 (1), pp. 51–5810.1179/0032589005X37675 ↗
25. C.J. Smithells, E.A. Brandes, and G.B. Brook: Metals Reference Book, 7th ed., Butterworths Scientific Publications, London, 1992.
26. Handbook for Sintered Components, Höganäs AB, Höganäs, Sweden, 1999, p. 67.
27. T. Marcu, A. Molinari, G. Straffelini, and S. Berg: Powder Metall., 2005, vol. 48 (2), pp. 139–43.10.1179/003258905X37701 ↗
28. M.W. Zu and K.S. Hwang: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3577–85.
29. Z. Zhang, K. Frisk, A. Salwen, and R. Sandtrom: Powder Metall., 2004, vol. pp. 47 (3), pp. 239–46.10.1179/003258904225015572 ↗
30. P. Dudek and A. Cias: Arch. Metall. Mater., 2008, vol. 53 (3), pp. 809–16.
31. M. Kamada, H. Miura, and Y. Tokunaga: Int. J. Powder Metall., 1991, vol. 27, pp. 255–63.
32. J. Tengzelius and C.A. Blände: Powder Metall. Int., 1984, vol. 16, pp. 158–65.
33. L. Chaman: Rev. Particul. Mater., 1993, vol. 1, pp. 75–105.
34. A. Piotrowski and G. Biallas: Powder Metall., 1998, vol. 41, pp. 109–14.10.1179/pom.1998.41.2.109 ↗
35. D.J. Mack: Trans. AIME, 1946, vol. 166, pp. 68–85.
36. I. Fonseca, J.A. Benito, I. Mejía, J. Jorba, and A. Roca: Rev. Met., 2002, vol. 38, pp. 249–55.10.3989/revmetalm.2002.v38.i4.407 ↗
37. A. Villuendas, J. Jorba, and A. Roca: Rev. Met., 2005, Special Issue, pp. 46–52.10.3989/revmetalm.2005.v41.iExtra.997 ↗
38. N.F. Mott: Phil. Mag., 1952, vol. 43, pp. 1151–78.10.1080/14786441108521024 ↗
39. H.F. Pollard: Sound Waves in Solids, Pion Ltd., London, 1977.
40. M. Kabatova, E. Dudrova, and A.S. Wronski: Fatigue Fract. Eng. Mater. Struct., 2009, vol. 32, pp. 214–22.10.1111/j.1460-2695.2009.01328.x ↗
41. G. Straffelini, C. Menapace, and A. Molinari: Proc. EURO PM2003, Valencia, Spain, Oct. 2003, EPMA, Shrewsbury, UK, 2003, vol. 1, p. 331.