Orientation imaging microscopy studies of recrystallization in interstitial-free steel
Source abstract
Abstract
The origin of the γ fiber recrystallization texture in interstitial-free (IF) steel developed during continuous annealing has been investigated by scanning electron microscopy (SEM) and orientation imaging microscopy (OIM). Nucleation of {111} «uvw» oriented crystals occurs in deformation banded γ grains and therefore a comprehensive study of microstructure of cold-rolled IF steel in the sections perpendicular to the rolling and transverse directions (TDs) and the rolling plane (RP) has been carried out to understand the formation, geometry, and microstructural features of recrystallization. The RP section gave abundant evidence of orientation gradients formed in γ oriented grains that had been subject to orientation splitting to give deformation bands. These orientation gradients across a single grain are around 5 to 30 deg and this orientation difference is sufficient to form nuclei with mobile interfaces during annealing and hence to create chains of γ oriented new grains in the original hot band γ grain envelopes. A grain impingement model requiring orientation pinning is then proposed to explain how these grains, contained in deformed γ grain envelopes, grow out into their neighbors to dominate the final recrystallization texture of IF steel. The α deformed grains contain only small lattice curvatures, and therefore in-grain nucleation is rare. These grains are mostly consumed by invading γ grains toward the end of the recrystallization process.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. S. Nagashima: Proc. 6th Int. Conf. on Textures of Materials, Iron and Steel Institute of Japan, Sendai, 1984, pp. 369–82.
2. M. Fukuda: Tetsu-to-Hagané, 1967, vol. 53, pp. 559–64.10.2355/tetsutohagane1955.53.4_559 ↗
3. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon, Oxford, United Kingdom, 1995.
4. W.B. Hutchinson: Proc. R. Soc. A, 1999, vol. 357, pp. 1471–85.10.1098/rsta.1999.0385 ↗
5. Q.Z. Chen, A.H.W. Ngan, and B.J. Duggan: Proc. R. Soc. A, 2003, vol. 459, pp. 1661–85.10.1098/rspa.2002.1051 ↗
6. Q.Z. Chen and B.J. Duggan: Phys. Mater. Metallogr., 2003, vol. 96, pp. S16-S27.
7. Q.Z. Chen and B.J. Duggan: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3423–30.10.1007/s11661-004-0178-5 ↗
8. M.Z. Quadir, Y.Y. Tse, K.T. Lam, and B.J. Duggan: 2nd Int. Conf. on Recrystallization and Grain Growth, B. Bacroix, J.H. Driver, R. Le Gall, C.I. Maurice, R. Penelle, H. Réglé, and L. Tabourot, Trans Tech Pub., Switzerland, 2004, vols. 467–470, pp. 311–16.
9. M.Z. Quadir and B.J. Duggan: Acta Mater., 2004, vol. 52, pp. 4011–21.10.1016/j.actamat.2004.05.017 ↗
10. E. Lindh, W.B. Hutchinson, and P. Bate: Mater. Sci. Forum, 1994, vols. 157–162, pp. 997–1002.10.4028/www.scientific.net/MSF.157-162.997 ↗
11. G.I. Taylor: J. Inst. Met., 1938, vol. 63, pp. 307–24.
12. P. Van Houtte: Proc. 7th Int. Conf. on Textures of Materials, C.M. Brakman, ed., Netherlands Society for Materials Science, Noordwijkerhout, 1984, pp. 7–23.
13. G.L. Liu and B.J. Duggan: Metall. Mater. Trans. A, 2001, vol. 31A, pp. 123–34.
14. Y.Y. Tse, G.L. Liu, and B.J. Duggan: Scripta Mater., 1999, vol. 42, pp. 25–30.10.1016/S1359-6462(99)00303-6 ↗
15. B.L. Adams, S.I. Wright, and K. Kunze: Metall. Trans. A, 1993, vol. 24A, pp. 819–31.10.1007/BF02656503 ↗
16. J.E. Bailey and P.B. Hirsch: Proc. R. Soc. A, 1962, vol. 267, pp. 11–30.
17. H. Takechi, H. Katoh, and S. Nagashima: Trans. AIME, 1968, vol. 242, pp. 56–59.
18. N. Rajmohan, Y. Hayakawa, J.A. Szpunar, and J.H. Root: Acta Mater., 1997, vol. 45, pp. 2485–94.10.1016/S1359-6454(96)00371-0 ↗
19. S.P. Bate and W.B. Hutchinson: Scripta Mater., 1997, vol. 36, pp. 195–98.10.1016/S1359-6462(96)00361-2 ↗
20. R. Higginson and P. Bate: Acta Mater., 1999, vol. 47, pp. 1079–90.10.1016/S1359-6454(99)00012-9 ↗
21. I.L. Dillamore, C.J.E. Smith, W.B. Hutchinson, and P.L. Morris: Proc. R. Soc., 1972, vol. 329, pp. 405–20.
22. D. Vanderschueren, N. Yoshinaga, and K. Koyama: Iron Steel Inst. Jpn. Int., 1996, vol. 36, pp. 1046–54.10.2355/isijinternational.36.1046 ↗
23. I. Samajdar, B. Verlinden, L. Kestens, and P. Van Houtte: Acta Mater., 1999, vol. 47, pp. 55–65.10.1016/S1359-6454(98)00337-1 ↗
24. B.J. Duggan, G.L. Liu, and Y.Y. Tse: Proc. 4th Int. Conf. on Recrystallization and Related Phenomena, ReX’99, T. Sakai and H.G. Suzuki, eds., Japan Institute of Metals, Tsukuba, Japan, 1999, pp. 367–72.
25. B.J. Duggan and Y.Y. Tse: Acta Mater., 2004, vol. 52, pp. 387–93.10.1016/j.actamat.2003.09.021 ↗
26. A.J. DeArdo: Proc. Int. Forum for the Properties and Applications of IF Steel, H. Takechi, eds., Arcadia Ichigaya, Tokyo, 2003, pp. 240–48.
27. B.C. De Cooman and A. De Vyt: Proc. Int. Forum for the Properties and Applications of IF Steel, H. Takechi, ed., Arcadia Ichigaya, Tokyo, 2003, pp. 249–58.