journal article·2020-10

Study on the Microstructure and Compression of Composite Metal Foam Core Sandwich Panels

Jacob Marx, Afsaneh Rabiei

Publisher page

Abstract

Stainless steel composite metal foam core sandwich panels (SS-CMF-CSP) were manufactured in large-scale panels and tested under quasi-static compression. Stainless steel face sheets were attached to the SS-CMF core using two methods: diffusion and adhesive bonding. Scanning electron microscope imaging revealed grain growth in both the matrix and sphere wall for the diffusion-bonded sandwich panels. The face sheets were found to not greatly affect the deformation of the SS-CMF core under compression. However, the diffusion-bonded SS-CMF-CSP yielded a stronger product primarily due to microstructural changes that occur during the diffusion bonding heat cycle within the SS-CMF core. The diffusion-bonded SS-CMF-CSP had a plateaus stress and densification stress 17 and 10 pct higher than its baseline SS-CMF, respectively. The large-scale manufacturing was improved, and additional samples were tested with a yield and plateau strength 75 to 80 pct higher than the initial SS-CMF samples. The improved diffusion-bonded SS-CMF-CSP showed similar strengthening, with a plateau stress 16 pct higher than its base SS-CMF. Finite element analysis was completed using IMPETUS Afea that advances the current modeling of SS-CMF and was found to be in good agreement with the experimental findings.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Mechanical Behavior of Composites · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. M. Ashby, A. Evans, N. FLeck, L. Gibson, J. Hutchinson, and H. Wadley: Metal Foams: A Design Guide., Butterworth Heimann, London, 2000, pp. 40–54.10.1115/1.1421119 ↗
2. J. Banhart: Prog. Mater. Sci., 2001, vol. 46, pp. 559–632.10.1016/S0079-6425(00)00002-5 ↗
3. J. Banhart: Adv. Eng. Mater., 2006, vol. 8, pp. 781–94.10.1002/adem.200600071 ↗
4. J. Marx and A. Rabiei: Adv. Eng. Mater., 2017, vol. 19, pp. 1600776.10.1002/adem.201600776 ↗
5. K. Kitazono, A. Kitajima, E. Sato, J. Matsushita, and K. Kuribayashi: Mater. Sci. Eng. A, 2002, vol. 327, pp. 128–32.10.1016/S0921-5093(01)01766-X ↗
6. H.N.G. Wadley, N.A. Fleck, and A.G. Evans: Compos. Sci. Technol., 2003, vol. 63, pp. 2331–43.10.1016/S0266-3538(03)00266-5 ↗
7. K.P. Jackson, J.M. Allwood, and M. Landert: J. Mater. Process. Technol., 2007, vol. 204, pp. 290–303.10.1016/j.jmatprotec.2007.11.117 ↗
8. A. Nabavi and J.V. Khaki: J. Sandw. Struct. Mater., 2010, vol. 13, pp. 177–87.10.1177/1099636210374270 ↗
9. M.A. Yahaya, D. Ruan, G. Lu, and M.S. Dargusch: Int. J. Impact Eng., 2015, vol. 75, pp. 100–9.10.1016/j.ijimpeng.2014.07.019 ↗
10. H. Lin, H. Luo, W. Huang, X. Zhang, and G. Yao: J. Mater. Process. Technol., 2016, vol. 230, pp. 35–41.10.1016/j.jmatprotec.2015.10.034 ↗
11. A. Rabiei and L.J. Vendra: Mater. Lett., 2009, vol. 63, pp. 533–6.10.1016/j.matlet.2008.11.002 ↗
12. A. Rabiei, L. Vendra, N. Reese, N. Young, and B.P. Neville: Mater. Trans., 2006, vol. 47, pp. 2148–53.10.2320/matertrans.47.2148 ↗
13. A. Rabiei and M. Garcia-Avila: Mater. Sci. Eng. A, 2013, vol. 564, pp. 539–47.10.1016/j.msea.2012.11.108 ↗
14. Y. Alvandi-Tabrizi, D.A. Whisler, H. Kim, and A. Rabiei: Mater. Sci. Eng. A, 2015, vol. 631, pp. 248–57.10.1016/j.msea.2015.02.027 ↗
15. S. Chen, J. Marx, and A. Rabiei: Int. J. Therm. Sci., 2016, vol. 106, pp. 70–9.10.1016/j.ijthermalsci.2016.03.005 ↗
16. B.P. Neville and A. Rabiei: Mater. Des., 2008, vol. 29, pp. 388–96.10.1016/j.matdes.2007.01.026 ↗
17. A. Rabiei: US Patent US9208912 B2, 2012: issued 2015.
18. A. Rabiei: Safety IDEA Report Project 20, Washington, DC, 2014.
19. T. Materials: ASM Handbook, Volume 9, Metallography and Microstructures, ASM International, Materials Park, OH. 2004, pp. 257-280.
20. J. Marx, M. Portanova, and A. Rabiei: Compos. Struct., 2018, vol. 194, pp. 652–61.10.1016/j.compstruct.2018.03.075 ↗
21. S.L. Lopatnikov, B.A. Gama, and J.W. Gillespie: Int. J. Impact Eng., 2007, vol. 34, pp. 587–95.10.1016/j.ijimpeng.2005.12.004 ↗
22. L. Li, P. Xue, and G. Luo: Mater. Des., 2016, vol. 110, pp. 72–9.10.1016/j.matdes.2016.07.123 ↗
23. M. Garcia-Avila, M. Portanova, and A. Rabiei: Compos. Struct., 2015, vol. 125, pp. 202–11.10.1016/j.compstruct.2015.01.031 ↗
24. J. Marx, M. Portanova, and A. Rabiei: Compos. Struct., 2019, vol. 225, pp. 111032.10.1016/j.compstruct.2019.111032 ↗
25. J.C. Marx, S.J. Robbins, Z.A. Grady, F.L. Palmieri, C.J. Wohl, and A. Rabiei: Appl. Surf. Sci., 2020, vol 505, pp. 144114.10.1016/j.apsusc.2019.144114 ↗
26. J.K.L. Lai: Mater. Sci. Eng., 1983, vol. 61, pp. 101–9.10.1016/0025-5416(83)90191-X ↗
27. M. Garcia-Avila and A. Rabiei: Metals., 2015, vol. 5, pp. 822–35.10.3390/met5020822 ↗