Hertzian Indentation Behavior of Electroless Ni-P-Ti Composite Coatings
Source abstract
Abstract
Ni-P-Ti composite coatings have been prepared by co-depositing Ni-P and nano-Ti particles which were then annealed. Tensile tests were conducted on standalone coatings to acquire the mechanical properties of the coatings without the effect of the steel substrate. The Hertzian indentation tests were performed on coating-steel substrate bilayer systems to investigate the indentation behavior of the coatings. After annealing, Ni3Ti and superelastic NiTi phases are identified in composite coatings by XRD and EDS. Compared to the as-deposited Ni-P coatings, the toughness of the annealed composite coatings improved significantly. The superelastic effect of NiTi particles was observed in the Hertzian indentation behavior of the annealed composite coatings. The strengthening mechanisms as well as toughening mechanisms such as crack bridging, crack deflection, crack arresting, and transformation toughening were discussed. Recovery ratio (η) values as well as Hertzian indentation stress distribution were computed to analyze and explain the indentation behavior of the as-deposited and annealed coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Semiconductor materials and interfaces · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. [1] M. Crobu, A. Scorciapino, B. Elsener, and A. Rossi, Electrochimica Acta, 2008, vol.53, pp.3364-70.10.1016/j.electacta.2007.11.071 ↗
2. [2] D. Vojtěch, M. Novák, M. Zelinková, P. Novák, A. Michalcová, and T. Fabián, Applied Surface Science, 2009, vol.255,3745-51.10.1016/j.apsusc.2008.10.026 ↗
3. [3] C.K. Lee, Materials Chemistry and Physics, 2009, vol. 114, pp. 125-33.10.1016/j.matchemphys.2008.08.088 ↗
4. [4] X.Q. Xu, J. Miao, Z.Q. Bai, Y.R. Feng, Q.R. Ma, and W.Z. Zhao, Applied Surface Science, 2012, vol. 258, pp. 8802-06.10.1016/j.apsusc.2012.05.094 ↗
5. [5] M. Islam, M.R. Azhar, N. Fredj, T.D. Burleigh, O.R. Oloyede, A.A. Almajid, and S. I. Shah, Surface and Coatings Technology, 2015, vol. 261, pp. 141-48.10.1016/j.surfcoat.2014.11.044 ↗
6. [6] M. Palaniappa and S.K. Seshadri, Wear, 2008, vol. 265, pp. 735-40.10.1016/j.wear.2008.01.002 ↗
7. [7] S. Duari, A. Mukhopadhyay, T.K. Barman, and P. Sahoo, Surfaces and Interfaces, 2017, vol. 6, pp. 177-89.10.1016/j.surfin.2017.01.009 ↗
8. [8] C.J. Lin, K.C. Chen, and J.L. He, Wear, 2006, vol. 261, pp. 1390-96.10.1016/j.wear.2006.03.054 ↗
9. [9] M. MacLean, Z. Farhat, G. Jarjoura, E. Fayyad, A. Abdullah, and M. Hassan, Wear, 2019, vol. 426-427, pp. 265-76.10.1016/j.wear.2019.01.058 ↗
10. [10] R. Neupane and Z. Farhat, Wear, 2013, vol. 301, pp. 682-87.10.1016/j.wear.2012.11.017 ↗
11. [11] Q.J. Zhou, J.Y. He, D.B. Sun, W.Y. Chu, and L.J. Qiao, Scripta Materialia, 2006, vol. 54, pp. 603-08.10.1016/j.scriptamat.2005.10.035 ↗
12. [12] B. Bozzini and M. Boniardi, Zeitschrift Fuer Metallkunde, 1997, vol. 88, pp. 493-97.
13. [13] C. Wang, Z. Farhat, G. Jarjoura, M.K. Hassan, and A.M. Abdullah, Wear, 2017, vol. 376-377, pp. 1630-39.10.1016/j.wear.2016.12.054 ↗
14. [14] R.F. Cook and G.M. Pharr, Journal of American ceramic society, 1990, vol. 73, pp. 787-817.10.1111/j.1151-2916.1990.tb05119.x ↗
15. [15] H. Chai and B.R. Lawn, Journal of Materials Research, 2011, vol. 19, pp. 1752-61.10.1557/JMR.2004.0219 ↗
16. [16] B.R. Lawn, Journal of American Ceramic Society, 1998, vol. 81, pp. 1977-94.10.1111/j.1151-2916.1998.tb02580.x ↗
17. [17] J. Chen, Journal of Physics D: Applied Physics, 2012, vol. 45, pp. 1-14.
18. [18] H.H. Hertz, J. Reine Angew. Math, 1881, vol. 92, pp. 156-71
19. [19] N. Schwarzer, F. Richter, and G. Hecht, Surface and Coatings Technology, 1999, vol. 114, pp. 292-304.10.1016/S0257-8972(99)00057-2 ↗
20. [20] A.C.F. Cripps, Journal of Materials Science, 1997, vol. 32, pp. 1277-1285.10.1023/A:1018500522014 ↗
21. [21] C. Kocer and R.E. Collins, Journal of American Ceramic Society, 1998, vol. 81, pp. 1736-42.10.1111/j.1151-2916.1998.tb02542.x ↗
22. [22] F. Frank, Proceeding of the Royal Society of London. Series A. Mathematical and Physical Sciences, 1967, vol. 299, pp. 291-306.10.1098/rspa.1967.0137 ↗
23. [23] S. Y. Chen, T.N. Farris, and S. Chandrasekar, International Journal of Solids and Structures, 1995, vol. 32, pp. 329-40.10.1016/0020-7683(94)00127-I ↗
24. [24] D. Louapre and K. Breder, International Journal of Applied Ceramic Technology, 2015, vol. 12, pp. 1071-79.10.1111/ijac.12317 ↗
25. H. Hertz, Hertz’s Miscellaneous Papers, 1896, pp. 1–383.
26. [26] K.L. Johnson, Contact mechanics, Cambridge University Press, Cambridge, UK 198510.1017/CBO9781139171731 ↗
27. [27] Z. Li, Z.N. Farhat, G. Jarjoura, E. Fayyad, A. Abdullah, and M. Hassan, Tribology Transactions, 2019, vol. 62, pp. 880-96.10.1080/10402004.2019.1634227 ↗
28. J.I.C.F.D. Data®, Powder Diffraction File(PDF) No. 00-004-0850, JCPDS: Netwon Square, PA, USA, 2019.
29. [29] Y. Zhao, C. Jiang, Z. Xu, F. Cai, Z. Zhang, and P. Fu, Materials & Design, 2015, vol. 85, pp. 39-46.10.1016/j.matdes.2015.06.144 ↗
30. J.I.C.F.D. Data®, Powder Diffraction File (PDF) No. 00-008-5982, JCPDS: Netwon Square, PA, USA, 2019.
31. J.I.C.F.D. Data®, Powder Diffraction File (PDF) No. 00-015-7502, JCPDS: Netwon Square, PA, USA, 2019.
32. [32] S. Guo, L. Li, G. Zhang, W. Wang, and X. Zhao, Applied Surface Science, 2009, vol. 255, pp. 3691-95.10.1016/j.apsusc.2008.10.023 ↗
33. [33] S. Karthikeyan, L. Vijayaraghavan, S. Madhavan, and A. Almeida, Metallurgical and Materials Transactions A, 2016, vol. 47, pp. 2223-31.10.1007/s11661-016-3413-y ↗
34. [34] J. K. Luo, A.J. Flewitt, S. M. Spearing, N. A. Fleck, and W. I. Milne, Materials Letters, 2004, vol. 58, pp. 2306-09.10.1016/j.matlet.2004.02.044 ↗
35. [35] J.N. Balaraju, T.S.N.S. Narayanan, and S.K. Seshadri, Journal of Applied Electrochemistry, 2003, vol. 33, pp. 807-16.10.1023/A:1025572410205 ↗
36. [36] Y. Motemani, M.N. Ahmadabadi, M.J. Tan, M. Bornapour, and S. Rayagan, Journal of Alloys and Compounds, 2009, vol. 469, pp. 164-68.10.1016/j.jallcom.2008.01.153 ↗
37. [37] C. Wang, Z. Farhat, G. Jarjoura, M.K. Hassan, and A.M. Abdullah, Surface and Coatings Technology, 2018, vol. 334, pp. 243-52.10.1016/j.surfcoat.2017.10.074 ↗
38. [38] C. Wang, Z. Farhat, G. Jarjoura, M.K. Hassan, A.M. Abdullah, and E.M. Fayyad, Surface and Coatings Technology, 2017, vol. 326, pp. 336-42.10.1016/j.surfcoat.2017.07.067 ↗
39. [39] B.T. Lester, T. Baxevanis, Y. Chemisky, and D.C. Lagoudas, Acta Mechanica, 2015, vol. 226, pp. 3907-60.10.1007/s00707-015-1433-0 ↗
40. ASTM, Standard Test Method for Adhesion Strength and Mechannical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing, ASTM International, 2015, C1624-05, pp. 1–29.
41. [41] V. D. Papachristos, C.N. Panagopoulos, L. W. Christoffersen, and A. Markaki, Thin Solid Films, 2001, vol. 396, pp. 173-82.10.1016/S0040-6090(01)01223-8 ↗
42. [42] A. Roman, D. Chicot and J. Lesage, Surface and Coatings Technology, 2002, vol. 155, pp. 161-68.10.1016/S0257-8972(02)00109-3 ↗
43. [43] C.S. Chang, K.H. Hou, M.D. Ger, C.K. Chung, and J.F. Lin, Surface and Coatings Technology, 2016, vol. 288, pp. 135-43.10.1016/j.surfcoat.2016.01.020 ↗
44. [44] Y.J. Li, A.M.F. Muggerud, A. Olsen, and T. Furu, Acta Materialia, 2012, vol. 60, pp. 1004-14.10.1016/j.actamat.2011.11.003 ↗
45. [45] F. Qian, S. Jin, G. Sha, and Y. Li, Acta Materialia, 2018, vol. 157, pp. 114-25.10.1016/j.actamat.2018.07.001 ↗
46. [46] R.O. Ritchie, Materials Science and Engineering: A, 1988, vol. 103, pp. 15-28.10.1016/0025-5416(88)90547-2 ↗
47. [47] X. Sun and J.A. Yeomans, Journal of Materials and Science, 1996, vol. 31, pp. 875-80.10.1007/BF00352885 ↗
48. [48] K.T. Faber, T. Iwagoshi, and A. Ghosh, Communications of the American Ceramic Society, 1988, vol. 71, pp. 399-401.10.1111/j.1151-2916.1988.tb06419.x ↗
49. [49] D.R. Ni and Z.Y. Ma, Acta Metallurgica Sinica (English Letters), 2014, vol. 27, pp. 739-61.10.1007/s40195-014-0164-x ↗
50. [50] J.S.C. Jang, S.R. Jian, T.H. Li, J.C. Huang, C.Y.A. Tsao, and C.T. Liu, Journal of Alloys and Compounds, 2009, vol. 485, pp. 290-94.10.1016/j.jallcom.2009.06.084 ↗
51. [51] J.S.C. Jang, J.B. Li, S.L. Lee, Y.S. Chang, S.R. Jian, J.C. Huang, and T.G. Nieh, Intermetallics, 2012, vol. 30, pp. 25-29.10.1016/j.intermet.2012.03.038 ↗
52. [52] R. Liu, D.Y. Li, Y.S. Xie, R. Llewellyn, and H.M. Hawthorne, Scripta Materialia, 1999, vol. 41, pp. 691-96.10.1016/S1359-6462(99)00199-2 ↗
53. [53] R. Neupane, Indentation and Wear Behavior of Superelastic TiNi Shape Memory Alloy, Dalhousie University, Halifax, 2014.
54. [54] C. Greiner, S.M. Oppenheimer, and D.C. Dunand, Acta Biomater, 2005, vol. 1, pp. 705-16.10.1016/j.actbio.2005.07.005 ↗
55. [55] Y. Chen, O. Tyc, O. Molnárová, L. Heller, and P. Šittner, Shape Memory and Superelasticity, 2018, vol. 5, pp. 42-62.10.1007/s40830-018-00205-2 ↗
56. [56] M.M. Sherif and O.E. Ozbulut, Smart Materials and Structures, 2018, vol. 27, pp. 1-13.10.1088/1361-665X/aa9819 ↗
57. [57] Z. Farhat, G. Jarjoura, and M. Shahirnia, Metallurgical and Materials Transactions A, 2013, vol. 44, pp. 3544-51.10.1007/s11661-013-1727-6 ↗