journal article·2019-08-15

Oxidation Resistance Improvement of Ni-Base Single-Crystal Superalloy Melted in a CaO Crucible

Takuya Sugiyama, Satoshi Utada, Tadaharu Yokokawa, Makoto Osawa, Kyoko Kawagishi, Shinsuke Suzuki, Hiroshi Harada

Publisher page

Abstract

An advanced Ni-base single-crystal superalloy, TMS-238, has the highest temperature capability, but there is still potential to improve its high-temperature properties. In the present study, aiming for that further improvement, TMS-238 was melted in a CaO crucible, which replaced an Al2O3 crucible. Creep tests at 1100 °C/137 MPa and cyclic oxidation tests at 1100 °C were conducted to compare the high-temperature properties of TMS-238 melted in an Al2O3vs a CaO crucible. Regardless of the melting crucible, the creep properties of the samples were equivalent. Meanwhile, TMS-238 melted in a CaO crucible exhibited better oxidation resistance. Although the composition of the oxide scale was almost the same, the sample melted in an Al2O3 crucible had its oxide scale spalled, while a continuous oxide scale was formed on the sample melted in a CaO crucible. Dissolved Ca capturing S as CaS and preventing segregation of S at the metal-oxide interface is a possible reason for the improvement of the oxide scale adhesiveness. The results indicated that melting in a CaO crucible can improve the oxidation resistance of the original superalloys while maintaining their creep properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. K. Kawagishi, A. Yeh, T. Yokokawa, T. Kobayashi, Y. Koizumi, and H. Harada: Superalloys 2012, Seven Springs, Champion, PA, TMS, Warrendale, PA, 2012, pp. 189–95.10.1002/9781118516430.ch21 ↗
2. S. Walston, A. Cetel, R. MacKay, K. O’Hara, D. Duhl, and R. Dreshfield: Superalloys 2004, Seven Springs, Champion, PA, TMS, Warrendale, PA, 2004, pp. 15–24.
3. K. Kawagishi, A. Sato, T. Kobayashi, and H. Harada: J. Jpn. Inst. Met. Mater., 2005, vol. 69, pp. 249–52.10.2320/jinstmet.69.249 ↗
4. A. Sato, A.-C. Yeh, T. Kobayashi, T. Yokokawa, H. Harada, T. Murakumo, and J.X. Zhang: Energy Mater., 2007, vol. 2, pp. 19–25.10.1179/174892407X205254 ↗
5. Q. Feng, B. Tryon, L.J. Carroll, and T.M. Pollock: Mater. Sci. Eng. A, 2007, vol. 458, pp. 184–94.10.1016/j.msea.2006.12.064 ↗
6. K. Kawagishi, A. Sato, H. Harada, A.-C. Yeh, Y. Koizumi, and T. Kobayashi: Mater. Sci. Technol., 2009, vol. 25, pp. 271–75.10.1179/174328408X361517 ↗
7. D. Argence, C. Vemault, Y. Desvallces, and D. Foumier: Superalloys 2000, Seven Springs, Champion, PA, TMS, Warrendale, PA, 2000, pp. 829–37.
8. T. Yokokawa, H. Harada, Y. Mori, K. Kawagishi, Y. Koizumi, T. Kobayashi, M. Yuyama, and S. Suzuki: Superalloys 2016, Seven Springs, Champion, PA, TMS, Warrendale, PA, 2016, pp. 123–30.10.1002/9781119075646.ch14 ↗
9. C. Sarioglu, C. Stinner, J.R. Blachere, N. Birks, F.S. Pettit, G.H. Meier, and J.L. Smialek: Superalloys 1996, Seven Springs, Champion, PA, TMS, Warrendale, 1996, pp. 71–80.
10. J.L. Smialek: J. Eng. Gas Turb. Power, 1998, vol. 120, pp. 370–74.10.1115/1.2818132 ↗
11. J.L. Smialek and B.A. Pint: Mater. Sci. Forum, 2001, vol. 360–72, pp. 459–66.10.4028/www.scientific.net/MSF.369-372.459 ↗
12. Y. Joh, T. Kobayashi, T. Yokokawa, K. Kawagishi, M. Osawa, S. Suzuki, and H. Harada: Proc. 10th Liege Conf., 2014, pp. 538–44.
13. D.W. Yun, S.M. Seo, H.W. Jeong, and Y.S. Yoo: Corros. Sci., 2015, vol. 90, pp. 392–401.10.1016/j.corsci.2014.10.030 ↗
14. Y. Ikeda, K. Nii, and K. Yoshihara: Trans. Jpn. Inst. Met., Suppl., 1983, vol. 24, pp. 207–14.
15. Y. Ikeda, M. Tosa, K. Yoshihara, and K. Nii: ISIJ Int., 1989, vol. 29, pp. 966–72.10.2355/isijinternational.29.966 ↗
16. P.Y. Hou and J. Stringer: Oxid. Met., 1992, vol. 38, pp. 323–45.10.1007/BF00665658 ↗
17. R. Molins, I. Rouzou, and P. Hou: Mater. Sci. Eng. A, 2007, vol. 80, pp. 80–88.10.1016/j.msea.2006.11.015 ↗
18. J.L. Smialek, D.T. Jayne, J.C. Schaeffer, and W.H. Murphy: Thin Solid Films, 1994, vol. 253, pp. 285–92.10.1016/0040-6090(94)90335-2 ↗
19. K. Harris and J.B. Wahl: Superalloys 2004, Seven Springs, Champion, PA, TMS, Warrendale, PA, 2004, pp. 45–52.
20. A.W. Funkenbusch, J.G. Smeggil, and N.S. Bornstein: Metall. Trans. A, 1985, vol. 16A, pp. 1164–66.10.1007/BF02811687 ↗
21. T. Fujioka, M. Kinugasa, and S. Iizumi: Superalloys 1976, Seven Springs, Champion, PA, TMS, Warrendale, PA, 1976, pp. 159–69.
22. S.P. Leyland, I.M. Edmonds, S. Irwin, C.N. Jones, A. Bhowmik, D. Ford, and C.M.F. Rae: Superalloys 2016, Seven Springs, Champion, PA, TMS, Warrendale, PA, 2016, pp. 247–56.10.1002/9781119075646.ch27 ↗
23. S. Utada, Y. Joh, M. Osawa, T. Yokokawa, T. Kobayashi, K. Kawagishi, S. Suzuki, and H. Harada: Superalloys 2016, Seven Springs, Champion, PA, TMS, Warrendale, PA, 2016, pp. 591–99.
24. S. Utada, Y. Joh, M. Osawa, T. Yokokawa, T. Sugiyama, T. Kobayashi, K. Kawagishi, S. Suzuki, and H. Harada: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 4029–41.10.1007/s11661-018-4710-4 ↗
25. T. Kobayashi, H. Harada, J. Tasaki, K. Sugita, and K. Kikuchi: Japan Patent Pending, Application Number 2010-281534 (2010.12.16).
26. K. Harris, G.L. Erickson, W.D. Brentnall, J.M. Aurrecoechea, S.L. Sikkenga, and K.G. Kubarych: Superalloys 1992, Seven Springs, Champion, PA, TMS, Warrendale, PA, 1992, pp. 297–306.
27. Y. Koizumi, H. Harada, T. Kobayashi, and T. Yokokawa: J. Jpn. Inst. Met. Mater., 2005, vol. 69, pp. 743–46.10.2320/jinstmet.69.743 ↗
28. R. Darolia, D.F. Lahrman, R.D. Field, and R. Sisson: Superalloys 1988, Seven Springs, Champion, PA, TMS, Warrendale, PA, 1988, pp. 255–64.
29. S.H. Ai, V. Lupinc, and M. Maldini: Scripta Metall. Mater., 1992, vol. 26, pp. 579–84.10.1016/0956-716X(92)90287-O ↗
30. J. Komenda and P.J. Henderson: Scripta Mater., 1997, vol. 37, pp. 1821–26.10.1016/S1359-6462(97)00341-2 ↗
31. A.I. Epishin, I.L. Svetlov, N. V Petrushin, Y.V. Loshchinin, and T. Link: Def. Diffus. Forum, 2011, vols. 309–310, pp. 121–26.10.4028/www.scientific.net/DDF.309-310.121 ↗
32. N. Vialas and D. Monceau: Surf. Coat. Technol., 2006, vol. 201, pp. 3846–51.10.1016/j.surfcoat.2006.07.246 ↗
33. I. Barin, ed., Thermochemical Data of Pure Substances, 3rd ed., Wiley-VCH Verlag GmbH, Weinheim, Germany, 2008.
34. S.R. Shatynski: Oxid. Met., 1977, vol. 11, pp. 307–20.10.1007/BF00608014 ↗
35. K.N. Straffordt and J.M. Harrison: Oxid. Met., 1976, vol. 10, pp. 347–59.10.1007/BF00612047 ↗