journal article·2019-05-15

Effect of Alloying Elements on Microstructure and Mechanical Properties of Air-Cooled Bainitic Steel

Minal Shah, S. K. Das, S. Ghosh Chowdhury

Publisher page

Abstract

In the present investigation, a carbide-free bainitic steel has been produced in the laboratory through the air cooling route. Optimization of the alloying elements was done based on thermodynamic and kinetic calculations. Emphasis was given to obtain ultrafine bainitic microstructure by maximizing the driving force and lowering the transformation temperature of bainite formation. In addition to bainite, the microstructure contained a small amount of austenite and martensite. It was observed that Mn decreases ΔGγ → α to a greater extent as compared to Cr and Si. Therefore, a low Mn-high Cr alloy exhibited large driving force and low Bs temperature. Si promoted carbon partitioning in the adjacent austenite to make it more stable. Therefore, the transformation of deformation-induced martensite from the retained austenite during the deformation process was restricted, resulting in higher toughness of the alloy. Thus, the air-cooled bainitic steel produced in lab scale showed better strength, toughness, and hardness than the conventional bainitic steel produced by the isothermal route.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. H.K.D.H. Bhadeshia and D.V. Edmonds: Met. Sci., 1980, vol. 14, pp. 41–49.10.1179/030634580790426328 ↗
2. R.C.D. Richardson: Wear, 1967, vol. 10, pp. 291–309.10.1016/0043-1648(67)90093-2 ↗
3. G. Gomez, T. Perez, and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2009, vol. 25, pp. 1501–07.10.1179/174328408X388130 ↗
4. G. Gomez, T. Perez, and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2009, vol. 25, pp. 1508–12.10.1179/174328408X388149 ↗
5. T. Sourmail, V. Smanio, F.G. Caballero, J. Cornide, C. Capdevilla, C. Garcia-Mateo, T. Chandra, M. Ionescu, and D. Mantovani: Mater. Sci. Forum, 2012, 706, 2308–13.10.4028/www.scientific.net/MSF.706-709.2308 ↗
6. C. Garcia-Mateo, F.G. Caballero, and H.K.D.H. Bhadeshia: ISIJ Int., 2003, vol. 43, pp. 1238–43.10.2355/isijinternational.43.1238 ↗
7. C. Garcia-Mateo and F.G. Caballero: ISIJ Int., 2007, vol. 45, pp. 1736–40.10.2355/isijinternational.45.1736 ↗
8. Sourav Das and Arunansu Haldar: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 1844–53.10.1007/s11661-013-2173-1 ↗
9. K. Wang, Z. Tan, G. Gao, B. Gao, X. Gui, R.D.K. Misra, B. Bai: Mater. Sci. Eng. A, 2016, 675, 120–27.10.1016/j.msea.2016.08.026 ↗
10. D. Seferian: Metallurgy of Welding, Mashgiz, Moscow, 1963, p. 268 (in Russian).
11. P. Clayton and N. Jin: Wear, 1996, vol. 200, pp. 74–82.10.1016/S0043-1648(96)07249-3 ↗
12. P. Clayton and R. Devanathan: Wear, 1992, vol. 156, pp. 121–31.10.1016/0043-1648(92)90148-2 ↗
13. J. Kalousek, D.M. Fegrdo, and E.E. Laufer: Wear, 1985, vol. 105, pp. 199–222.10.1016/0043-1648(85)90068-7 ↗
14. P.H. Shipway, S.J. Wood, and A.H. Dent: Wear, 1997, vols. 203–204, pp. 196–205.10.1016/S0043-1648(96)07411-X ↗
15. E. Vuorinen, A. Linström, P. Rubin, E. Navara, and M. Oden: Pellets 2006: Proc. 2nd World Conf. on ‘Pellets,’ Jonkoping, Sweden, June 2006, Swedish Bioenergy Association (SVEBIO), Stockholm, 2006, pp. 151–55.
16. Hong-Sheng Fang, Qi Li, Bing-Zhe Bai, Zhi-Gang Yang, Dong-Yu Liu, and Fu-Bao Yang: Int. J. ISSI, 2005, vol. 2, pp. 9–18.
17. Xiangwei Kong and Chunlin Qiu: J. Mater. Sci. Technol., 2013, vol. 29, pp. 446–50.10.1016/j.jmst.2013.03.022 ↗
18. L. Zhang, A. Pittner, T. Michael, M. Rhode, and T. Kannengiesser: Sci. Technol. Weld. Join., 2015, vol. 20, p. 371.10.1179/1362171815Y.0000000026 ↗
19. E. Keehan, L. Karlsson, H.-O. Andrén, and H.K.D.H. Bhadeshia: Sci. Technol. Weld. Join., 2006, vol. 11, pp. 9–1810.1179/174329306X77849 ↗
20. H.K.D.H. Bhadeshia: Bainite in Steels: Theory and Practice, 3rd ed., Maney Publishing, Leeds 2015, p. 286.
21. F.B. Pickering and T. Gladman: Iron Steel Inst., 1963, vol. 81, p. 10.
22. A.S. Keh and S. Weissmann: Electron Microscopy and the Strength of Crystals, Interscience, New York, NY, 1963, pp. 231–300.
23. C. Garcia-Mateo: Mater. Charact., 2016, vol. 122, pp. 83–89.10.1016/j.matchar.2016.10.023 ↗
24. A.A.B. Sugden and H.K.D.H. Bhadeshia: Metall. Trans. A, 1988, vol. 19A, pp. 1597–1602.10.1007/BF02674034 ↗
25. J. Daigne, M. Guttmann, and J.P. Naylor: Mater. Sci. Eng., 1982, vol. 56, pp. 1–10.10.1016/0025-5416(82)90176-8 ↗
26. S.B. Singh and H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 1998, vol. 245, pp. 72–79.10.1016/S0921-5093(97)00701-6 ↗
27. H.K.D.H. Bhadeshia and D.V. Edmonds: Mater. Sci., 1983, vol. 17, pp. 420–25.
28. A.R. Kiani-Rashid: J. Alloys Compd., 2009, vol. 474, pp. 490–98.10.1016/j.jallcom.2008.06.131 ↗
29. H.K.D.H. Bhadeshia: Bainite in Steels, The Institute of Materials, Cambridge University Press, Cambridge, United Kingdom, 1992.
30. E. Kozeschnik and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2013, vol. 4, pp. 343–47.
31. Mathew Peet and H.K.D.H. Bhadeshia: MUCG 83. Mater. Algor. Proj., 2011.
32. K.W. Andrews: J. Iron Steel Inst., 1965, vol. 203, pp. 721–27.
33. W. Steven and A.G. Haynes: J. Iron Steel Inst., 1956, vol. 183, p. 349–359.
34. T. Kunitake and Y. Okada: J. Iron Steel Inst., 1998, vol. 84, p. 137–141.10.2355/tetsutohagane1955.84.2_137 ↗
35. J.S. Kirkaldy and D. Venugopalan: in Phase Transformations in Ferrous Alloys, A.R. Marder and J.I. Goldstein, eds., TMS-AIME, Warrendale, PA, 1984, p. 125–48.
36. Y.-K. Lee: J. Mater. Sci. Lett., 2002, vol. 21, pp. 1253–55.10.1023/A:1016555119230 ↗
37. H.K.D.H. Bhadeshia and D.V. Edmonds: Acta Metall., 1980, vol. 28, pp. 1265–73.10.1016/0001-6160(80)90082-6 ↗
38. S. Khare, K. Lee, and H.K.D.H. Bhadeshia: Int. J. Mater. Res., 2009, 100, 1513–20.10.3139/146.110222 ↗
39. Kazuo Yamanaka and Yasuya Ohmori: ISIJ, 1977, vol. 17, p. 92.10.2355/isijinternational1966.17.92 ↗
40. M.U. Cohen: Rev. Sci. Instrum., 1935, vol. 6, pp. 68–74.10.1063/1.1751937 ↗
41. B.D. Cullity: Elements of X-Ray Diffraction, 2nd ed., Addison-Wesley Publishing Company Inc., Palo Alto, CA, 1978, pp. 363–66.
42. L. Lutterotti, S. Matthies, D. Chateigner, and S. Ferrari: Mater. Sci. Forum, 2002, vols. 408–412, pp. 1603–08.10.4028/www.scientific.net/MSF.408-412.1603 ↗
43. G. Ischia, H.-R. Wenk, L. Lutterotti, and F. Berberich: J. Appl. Cryst., 2005, vol. 38 (2), pp. 377–80.10.1107/S0021889805006059 ↗
44. D.J. Dyson and B. Holmes: J. Iron Steel Inst., 1970, vol. 208, pp. 469–74.
45. M.J. Peet: http://mathewpeet.org/thesis/programs/, 2009.
46. JMat Pro: http://www.sentesoftware.co.uk/jmatpro.aspx.
47. L.J. Habraken and M. Ecomopoulos: Transformation and Hardenibility in Steels, Climax Molybdenum Co., Ann Arbor, MI, 1967, pp. 69–106.
48. B.L. Bramfitt and J.G. Speer: Mater. Trans. A, 1990, vol. 21A, pp. 817–29.10.1007/BF02656565 ↗
49. F.G. Caballero, H. Roelofs, S. Hasler, C. Capdevila, J. Chao, J. Cornide, C. Garcia-Mateo: Mater. Sci. Technol., 2012, 28, 95–102.10.1179/1743284710Y.0000000047 ↗
50. L.C. Chang and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1995, vol. 11, pp. 874–81.10.1179/mst.1995.11.9.874 ↗
51. H. Huang, M.Y. Sherif, and P.E.J. Rivera-Diaz-del-Castillo: Acta Mater., 2013, vol. 61 pp. 1639–47.10.1016/j.actamat.2012.11.040 ↗
52. T. Angel: J. Iron Steel Inst., 1954, vol. 177, pp. 165–74.