Design and Development of Lightly Alloyed Ferritic Fire-Resistant Structural Steels
Source abstract
Abstract
To improve safety in case of building fires, stricter building codes have been proposed requiring structural steels to maintain two-thirds of their room-temperature yield strength after exposure to 873 K (600 °C) for longer than 20 minutes. To address this need, we have designed lightly alloyed structural steels, employing computational thermodynamics in combination with fundamental principles of precipitation strengthening and its temperature dependence, precipitate stability, characterization by optical microscopy and atom probe tomography (APT), and mechanical testing at room and elevated temperatures. The design process resulted in low-carbon ferritic steels with small alloying additions of V, Nb, and Mo that maintain over 80 pct of room-temperature yield strength in compression, and nearly 70 pct in tension, after 2 hours of exposure at 873 K (600 °C). APT demonstrates the formation of nanoscale MX and M2X (where M = V + Nb + Mo and X = C + N) precipitates after exposure to 873 K (600 °C). The favorable high-temperature mechanical properties are discussed with a model of precipitation strengthening by detachment-stress-mediated dislocation pinning at nanoscale semi-coherent MX precipitates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. T.J. MacGinley, Steel Structures: Practical Design Studies, second ed., CRC Press, 1998.
2. Y. Mizutani, K. Ishibashi, K. Yoshii, Y. Watanabe, R. Chijhwa, and Y. Yoshida: Shinnittetsu Giho, July 2004, pp. 38–44.
3. Standard Test Methods for Fire Tests of Building Construction and Materials, ASTM International, 2000.
4. 4. D.B. Moore, T. Lennon, Prog. Struct. Eng. Mater., 1997, vol. 1, pp. 4-9.10.1002/pse.2260010104 ↗
5. M.G. Goode: Fire Protection of Structural Steel in High-Rise Buildings, NIST, 2004, p. 88.
6. AISC Specification for Structural Steel Buildings, American Institute of Steel Construction, 2010, p. 610.
7. 7. W. Sha, F.S. Kelly, Z.X. Guo, J. Mater. Eng. Perform., 1999, vol. 8, pp. 606-612.10.1007/s11665-999-0017-3 ↗
8. 8. Y.D. Morozov, O.N. Chevskaya, G.A. Filippov, A.N. Muratov, Metallurgist, 2007, vol. 51, pp. 356-366.10.1007/s11015-007-0067-4 ↗
9. 9. W.-B. Lee, S.-G. Hong, C.-G. Park, S.-H. Park, Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1689-1698.10.1007/s11661-002-0178-2 ↗
10. 10. M. Assefpour-Dezfuly, B.A. Hugaas, A. Brownrigg, Mater. Sci. Technol., vol 6, 1990, pp. 1210-1214.10.1179/mst.1990.6.12.1210 ↗
11. 11. R. Wan, F. Sun, L. Zhang, A. Shan, Mater. Design, 2012, vol. 36, pp. 227-232.10.1016/j.matdes.2011.10.055 ↗
12. 12. Z.-Y. Zhang, Q.-l. Yong, X.-J. Sun, Z.-D. Li, J.-Y. Kang, G.-D. Wang, J. Iron Steel Res. Int, 2015, vol. 22, pp. 337-343.10.1016/S1006-706X(15)30009-1 ↗
13. 13. E. Arzt, D. Wilkinson, Acta Metall., 1986, vol. 34, pp. 1893-1898.10.1016/0001-6160(86)90247-6 ↗
14. 14. J. Rösler, E. Arzt, Acta Metall., 1988, vol. 36, pp. 1043-1051.10.1016/0001-6160(88)90158-7 ↗
15. 15. E. Arzt, J. Rösler, Acta Metall., 1988, vol. 36, pp. 1053-1060.10.1016/0001-6160(88)90159-9 ↗
16. 16. J. Rösler, E. Arzt, Acta Metall. Mater., 1990, vol. 38, pp. 671-683.10.1016/0956-7151(90)90223-4 ↗
17. 17. C. Wagner, Z. Elektrochemie, 1961, vol. 65, pp. 581-591.
18. 18. I. Lifshitz, V. Slyozov, Phys. Chem. Sol., 1961, vol. 19, pp. 35-50.10.1016/0022-3697(61)90054-3 ↗
19. 19. C. Enloe, K. Findley, C. Parish, M. Miller, B. De Cooman, J. Speer, Scripta mater., 2013, vol. 68, pp. 55-58.10.1016/j.scriptamat.2012.09.027 ↗
20. 20. P. Maugis, M. Gouné, Acta Mater., 2005, vol 53, pp. 3359-3367.10.1016/j.actamat.2005.03.036 ↗
21. 21. M. Perez, E. Courtois, D. Acevedo, T. Epicier, P. Maugis, Phil. Mag. Lett., 2007, vol. 87, pp. 645-656.10.1080/09500830701427003 ↗
22. 22. H.-J. Kestenbach, E.V. Morales, Acta. Micro., 1998, vol. 7, pp. 22-33.
23. 23. Z.-G. Yang, M. Enomoto, Mater. Sci. Eng. A, 2002, vol. 332, pp. 184-192.10.1016/S0921-5093(01)01729-4 ↗
24. 24. E.K. Storms, C.P. Kempter, J. Chem. Phys., 1965, vol. 42, pg. 2043.10.1063/1.1696244 ↗
25. 25. E.K. Storms, N.H. Krikorian, J. Chem. Phys., 1959, vol. 63, pp. 1747-1749.10.1021/j150580a042 ↗
26. 26. C.P. Kempter, E.K. Storms, J. Less-Common Met., 1967, vol. 13, pp. 443-447.10.1016/0022-5088(67)90037-9 ↗
27. 27. K. Miyata, T. Kushida, T. Omura, Y. Komizo, Metall. and Mat. Trans. A, 2003, vol. 34, pp. 1565-1573.10.1007/s11661-003-0303-x ↗
28. 28. D.J. Larson, T.J. Prosa, R.M. Ulfig, B.P. Geiser, T.F. Kelly, Local Electrode Atom Probe Tomography: A User’s Guide. Springer, New York, (2013).10.1007/978-1-4614-8721-0 ↗
29. Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature, ASTM International, 2009.
30. Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates, ASTM International, 2000.
31. Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials, ASTM International, 2009.
32. M. Boccalini Jr. and A. Sinatora: 6th International Tooling Conference Proceedings, 2002, pp. 509–24.
33. H.J. Frost, M.F. Ashby, Deformation-mechanism maps: the plasticity and creep of metals and ceramics, Pergamon Press, 1982.