γ′ Precipitation Study of a Co-Ni-Based Alloy
Source abstract
Abstract
A Co-Ni-based alloy strengthened by γ′-(L12) precipitates was utilized to investigate the precipitation evolution after various cooling rates and several aging conditions. In this study, the precipitate size and volume fraction have been studied via scanning electron microscopy and transmission electron microscopy. The influence of the precipitation evolution was measured via microhardness tests. The cooling rate study shows a more sluggish γ′ precipitation reaction compared to that observed in a Ni-based superalloy. Following a rapid cooling rate, the application of appropriate double aging treatments allows for the increase of the γ′ volume fraction as well as the control of the size and distribution of the precipitates. The highest hardness values reach those measured on supersolvus cast and wrought Ni-based superalloys. The observed γ′ precipitation behavior should have implications for the production, the heat treatment, the welding, or the additive manufacturing of this new class of high-temperature materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Additive Manufacturing Materials and Processes · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. P.R. Bhowal, E.F. Wright and E.L. Raymond: Metall. Trans. A, 1990, vol. 21A, pp. 1709-17.10.1007/BF02672587 ↗
2. G. Raisson and J.H. Davidson (1990). Ffgjdiob sfsghrfigo nsljkglksf. In: E. Bachelet, R. Brunetaud, P. Esslinger, J. Ewald, I. Kvernes, Y. Lindblom, D.B. Meadowcroft, V. Regis, R.B. Scarlin, K. Schneider and R. Singer, eds. High Temperature Materials for Power Engineering. Kluwer Academic, Dordrecht, pp. 1405–16.
3. J. Mao, K-M.M. Chang, W. Yang, D.U. Furrer, K. Ray and S.P. Vaze: Mater. Sci. Eng., 2002, vol. A332, pp. 318-29.10.1016/S0921-5093(01)01758-0 ↗
4. T.P. Gabb, J. Gayda, J. Telesman and A. Garg (2008) Dfsokgo fgvdgvdf. In: R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron, S.R. Woodard, (eds) Superalloys FmnFsdfhn. TMS Publisher, Warrendale, pp. 121-30.
5. J-Y. Guédou, J-C. Lautridou and Y. Honnorat (1992) Ffmjgfdokbgdb dgvmkgvmfd. In: S.D. Antolovich, R.W. Stusrud, R.A. MacKay, D.L. Anton, T. Khan, R.D. Kissinger and D.L. Klastrom (eds) Dijhfgvj dnfjdnf. TMS, Warrendale, pp. 267-76.
6. D. Locq, M. Marty and P. Caron: in Superalloys 2000, T.M. Pollock, R.D. Kissinger, R.R Bowman, K.A. Green, M. McLean, S.L. Olson and J.J. Schirra, eds., TMS, Warrendale, PA, USA, 2000, pp. 395-403
7. D. Locq, P. Caron, S. Raujol, F. Pettinari, A. Coujou and N. Clément (2004) Dibdgbdu afdskfjsd. In: K.A. Green, H. Harada, T.E. Howson, T.M. Pollock, R.C. Reed, J.J. Schirra and S. Walston (eds) Superalloys. TMS, Warrendale, pp. 179-8710.7449/2004/Superalloys_2004_179_187 ↗
8. A. Devaux, A. Helstroffer, J. Cormier, P. Villechaise, J. Douin, M. Hantcherli and F. Pettinari-Sturmel: in 8th International Symposium on Superalloy 718 and Derivatives, E. Ott, A. Banik, J. Andersson, I. Dempster, T. Gabb, J. Groh, K. Heck, R. Helmink, X. Liu and A. Wusatowska-Sarnek, eds., Wiley, Hoboken, NJ, 2014, pp 485–99.
9. J. Sato, T. Omori, K. Oikawa, I. Ohnuma, R. Kainuma and K. Ishida: Science, 2006, vol. 312, pp. 90-1.10.1126/science.1121738 ↗
10. S.K. Makineni, B. Nithin and K. Chattopadhyay: Scr. Mater., 2015, vol. 98, pp. 36-9.10.1016/j.scriptamat.2014.11.009 ↗
11. S.K. Makineni, B. Nithin and K. Chattopadhyay: Acta Mater., 2015, vol. 85, pp. 85-94.10.1016/j.actamat.2014.11.016 ↗
12. S.K. Makineni, A. Samanta, T. Rojhirunsakool, T. Alam, B. Nithin, A.K. Singh, R. Banerjee and K. Chattopadhyay: Acta Mater., 2015, vol. 97, pp. 29-40.10.1016/j.actamat.2015.06.034 ↗
13. S.K. Makineni, B. Nithin D. Palanisamy and K. Chattopadhyay: J. Mater. Sci., 2016, vol. 51, pp. 7843-60.10.1007/s10853-016-0026-1 ↗
14. B. Nithin, A. Samanta, S.K. Makineni, T. Alam, P. Pandey, A.K. Singh, R. Banerjee and K. Chattopadhyay: J. Mater. Sci., 2017, vol. 52, pp. 11036-47.10.1007/s10853-017-1159-6 ↗
15. C.H. Zenk, I. Povstugar, R. Li, F. Rinaldi, S. Neumeier, D. Raabe and M. Göken: Acta Mater., 2017, vol. 135, pp. 244-51.10.1016/j.actamat.2017.06.024 ↗
16. L. Zhang, X. Qu, M. Qin, Rafi-ud-din, X. He, Y. Liu and D. Li: Mater. Trans., 2012, vol. 53 (11), pp. 1922-28.10.2320/matertrans.M2012093 ↗
17. S. Meher, S. Nag, J. Tiley , A. Goel and R. Banerjee: Acta Mater., 2013, vol. 61, pp. 4266-76.10.1016/j.actamat.2013.03.052 ↗
18. V.A. Vorontsov, J.S. Barnard, K.M. Rahman, H.-Y. Yan, P.A. Miggley and D. Dye: Acta Mater., 2016, vol. 120, pp. 14-23.10.1016/j.actamat.2016.08.023 ↗
19. D.J. Sauza, P.J. Bocchini, D.C. Dunand and D.N. Seidman: Acta Mater., 2016, vol. 117, pp. 135-45.10.1016/j.actamat.2016.07.014 ↗
20. P.J. Bocchini, C.K. Sudbrack, R.D. Noebe, D.C. Dunand and D.N. Seidman: Mater. Sci. Eng. A, 2017, vol. 705, pp. 122-32.10.1016/j.msea.2017.08.034 ↗
21. A Azzam, T. Philippe, A Hauet, F Danoix, D Locq, P Caron and D Blavette : Acta Mater., 2018, vol. 145, pp. 377-8710.1016/j.actamat.2017.12.032 ↗
22. K. Shinagawa, T. Omori, J. Sato, K. Oikawa, I. Ohnuma, R. Kainuma and K. Ishida: Mater. Trans., 2008, vol. 49 (6), pp. 1474-79.10.2320/matertrans.MER2008073 ↗
23. G. Boittin, D. Locq, A. Rafray, P. Caron, P. Kanouté, F. Gallerneau and G. Cailletaud (2012) Sdd Fdfgs. In: E.S. Huron, R.C. Reed, M.C. Hardy, M.J. Mills, R.E. Montero, P.D. Portella and J. Telesman (eds) Superalloys 2012. Wiley, Hoboken, NJ, pp. 167-76.10.1002/9781118516430.ch19 ↗
24. G. Boittin, F. Gallerneau, D. Locq, P. Kanouté and G. Cailletaud: Tech. Mech., 2010, vol. 30(1-3), pp. 15-28
25. G. Boittin: Ph.D. Thesis, Mines-ParisTech, France, 2011.
26. M. Dahlén and L. Winberg: Met. Sci., 1979, March–April, pp. 163–69.
27. J.R. May, M.C. Hardy, M.R. Bache and D.D. Kaylor: Adv. Mater. Res., 2011, vol. 278, pp. 265-270.10.4028/www.scientific.net/AMR.278.265 ↗
28. F. Xue, H.J. Zhou, X.F. Ding, M.L. Wang and Q. Feng: Mater. Lett., 2013, vol. 112, pp. 215-18.10.1016/j.matlet.2013.09.023 ↗
29. J. Gayda, P. Kantzos and J. Miller: Pratical Failure Analysis, 2003, vol. 3 (1), pp. 55-9.10.1007/BF02717409 ↗
30. W.M. Kane, U. Krupp, T. Jacobs and C.J. McMahon: Mater. Sci. Eng. A, 2005, vol. 402, pp.42-6.10.1016/j.msea.2005.05.032 ↗
31. Chester T. Sims, Norman S. Stoloff and William C. Hagel: Superalloys II, John Wiley & Sons, New-York, NY, 1987, pp. 495-516.
32. M.B. Henderson, D. Arrell, M. Heobel, R. Larsson and G. Marchant: Sci. Technol. Weld. Joining, 2004, vol. 9 (1), pp. 13-21.10.1179/136217104225017099 ↗
33. L.N. Carter, C. Martin, P.J. Withers and M.M. Attallah: J. Alloys Compd., 2014, vol. 615, pp. 338-47.10.1016/j.jallcom.2014.06.172 ↗
34. M.M. Attallah, R. Jennings, X.Q. Wang and L.N. Carter: MRS Bull., 2016, Vol. 41 (10), pp. 758-64.10.1557/mrs.2016.211 ↗
35. M.D. Rowe: Welding research, supplement to Weld J., 2006, pp. 27-s–34-s.
36. Y. Danis, C. Arvieu, E. Lacoste, T. Larrouy and J.-M. Quessinet: Mater. Des., 2010, vol. 31, pp. 402-16.10.1016/j.matdes.2009.05.041 ↗
37. A. Lingenfelter (1989) In: Superalloy 718: metallurgy and applications (1989), E.A. Loria, eds., TMS, Warrendale, PA, pp. 673–83.10.7449/1989/Superalloys_1989_673_683 ↗
38. R. Thamburaj, W. Wallace and J.A. Goldak: Int. Met. Rev., 1983, vol. 28 (1), pp. 1-22.10.1179/imr.1983.28.1.1 ↗
39. A. Devaux, L. Nazé, R. Molins, A. Pineau, A. Organista, J.Y. Guédou, J.F. Uginet and P. Héritier: Mater. Sci. Eng. A, 2008, vol. 486, pp. 117-22.10.1016/j.msea.2007.08.046 ↗
40. S. Neumeier, L.P. Freund and M. Göken: Scr. Mater., 2015, vol. 109, pp. 104-07.10.1016/j.scriptamat.2015.07.030 ↗
41. D.J. Novotnak, G.E. Maurer, L.W. Lherbier and J.F. Radavich (2008) Fssdgfsgfbg cbrf dff. In: R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron, S.R. Woodard, eds. Superalloys fsdfsv fcafdfd. TMS, Warrendale, PA, pp. 339–43
42. T.M. Pollock and A.S. Argon: Acta Metall. Mater., 1992, vol. 40 (1), pp. 1-30.10.1016/0956-7151(92)90195-K ↗