journal article·2018-05

The Effect of Nb Addition on the Microstructure and the High-Temperature Strength of Fe3Al Aluminide

Petr Kratochvíl, Martin Švec, Robert Král, Jozef Veselý, Pavel Lukáč, Tomáš Vlasák

Publisher page

Abstract

The microstructural and high-temperature mechanical properties of Fe–26Al–xNb (x = 3 and 5 at. pct) are compared. The alloys were investigated “as cast” and after hot rolling at 1473 K (1200 °C). Scanning electron microscopes equipped with EDS and EBSD were used for the microstructure and phase identification. The addition of 3 at. pct of Nb into the Fe3Al matrix leads to the formation of C14 λ—Laves phase (Fe,Al)2Nb (LP) particles spread in the Fe3Al matrix, while an eutectic with thin lamellae of LP C14 λ—Laves phase (Fe,Al)2Nb and matrix is also formed in the iron aluminide with 5 at. pct of Nb. The presence of incoherent precipitates is connected with the enhancement of the high-temperature strength and creep resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Semiconductor materials and interfaces · Quasicrystal Structures and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. C. G. McKamey: Physical Metallurgy and Processing of Intermetallic Compounds, 1994, Springer, Boston, pp. 351 – 391.
2. [2] N. S. Stoloff: Materials Science and Engineering A258, 1998, pp. 1 – 14.10.1016/S0921-5093(98)00909-5 ↗
3. [3] S. C. Deevi, V. K. Sikka: Intermetallics 4, 1996, pp. 357 – 375.10.1016/0966-9795(95)00056-9 ↗
4. [4] M. Palm: Intermetallics 13, 2005, pp. 1286 – 1295.10.1016/j.intermet.2004.10.015 ↗
5. M. Palm, A. Schneider, F. Stein, and G. Sauthoff: Mater. Res. Soc. Symp. Proc., Vol. 842, 2005, S1.7.1–S1.7.12.
6. P. Kejzlar, P. Kratochvíl, R. Král, V. Vodičková: Metall. Mater. Trans. A. 2014, 45(1), 335–342.10.1007/s11661-013-1987-1 ↗
7. [7] P. Kratochvíl, P. Kejzlar, R. Král, V. Vodičková: Intermetallics 20, 2012, pp. 39 – 46.10.1016/j.intermet.2011.08.007 ↗
8. P. Kratochvíl, M. Švec, V. Vodičková: Metall. Mater. Trans. A 48, 2017, 4093–4096.10.1007/s11661-017-4174-y ↗
9. [9] O. Prymak, F. Stein: Intermetallics 18, 2010, pp. 1322 –1326.10.1016/j.intermet.2009.12.022 ↗
10. Morris DG, Muñoz-Morris MA.: Intermetallics. 2012;23:169-7610.1016/j.intermet.2011.11.020 ↗
11. D. M. Dimiduk, M. G. Mendiratta, D. Banerjee, H. A. Lipsitt: Acta Metallurgica, 36, 2947–58, 1988.10.1016/0001-6160(88)90177-0 ↗
12. M. Palm: J. Alloys Compd. 2009, 475(1–2), 173–177.10.1016/j.jallcom.2008.07.036 ↗
13. V. Raghavan: Journal of Phase Equilibria and Diffusion, 27, 284–287, 2006.10.1361/154770306X109845 ↗
14. J. Čadek: Creep in Metallic Materials. Academia, Prague 1988.
15. O. D. Sherby, J. Wertman: Acta Metall., 1979, 27, 387-400.10.1016/0001-6160(79)90031-2 ↗
16. C. Herring: J. Appl. Phys. 21, 1950, 437.10.1063/1.1699681 ↗
17. F. R. N. Nabarro: Reports on Conference on Strength of Solids, The Physical Society, London, 1948, pp. 75.