journal article·2018-03

Precipitation Strengthening by Induction Treatment in High Strength Low Carbon Microalloyed Hot-Rolled Plates

G. Larzabal, N. Isasti, J. M. Rodriguez-Ibabe, P. Uranga

Publisher page

Abstract

The use of microalloyed steels in the production of thick plates is expanding due to the possibility of achieving attractive combinations of strength and toughness. As market requirements for high strength plates are increasing and new applications require reduced weight and innovative designs, novel approaches to attaining cost-effective grades are being developed. The mechanism of precipitation strengthening has been widely used in thin strip products, since the optimization of the coiling strategy offers interesting combinations in terms of final properties and microalloying additions. Precipitation strengthening in thick plates, however, is less widespread due to the limitation of interphase precipitation during continuous cooling after hot rolling. With the main objective of exploring the limits of this strengthening mechanism, laboratory thermomechanical simulations that reproduced plate hot rolling mill conditions were performed using low carbon steels microalloyed with Nb, NbMo, and TiMo additions. After continuous cooling to room temperature, a set of heat treatments using fast heating rates were applied simulating the conditions of induction heat treatments. An important increase of both yield and tensile strengths was measured after induction treatment without any important impairment in toughness properties. A significant precipitation hardening is observed in Mo-containing grades under specific heat treatment parameters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. S. Tsuyama: ISIJ Int., 2015, Vol. 55, pp. 67-78.10.2355/isijinternational.55.67 ↗
2. S.G. Jansto: Proceedings New Developments on Metallurgy and Applications of High Strength Steels Conference, Buenos Aires, 2008, TMS, Warrendale, PA, pp. 1313–26.
3. N. Isasti, D. Jorge-Badiola, M.L. Taheri and P. Uranga: Metall. Mater. Trans. A, 2013, Vol. 44A, pp. 3552-63.10.1007/s11661-013-1738-3 ↗
4. H-W. Yen, P-Y. Chen, C-Y. Huang and J-R. Yang: Acta Mat., 2011, Vol. 59, pp. 6264–74.10.1016/j.actamat.2011.06.037 ↗
5. J. Gajendra, D. Sourav, S. Subhasis, L. Arijit and H. Arunansu: Mater. Sci. Eng. A, 2013, Vol. 561, pp. 394–402.10.1016/j.msea.2012.10.047 ↗
6. M. Charleux, W.J. Poole, M. Militzer and A. Deschamps: Metall. Mater. Trans. A, 2000, Vol. 32A, pp. 1635-47.
7. V. Carretero Olalla, V. Bliznuk, N. Sanchez, P. Thibaux, L.A.I. Kestens and R.H. Petrov: Mater. Sci. Eng. A, 2014, Vol. 604, pp. 46-56.10.1016/j.msea.2014.02.066 ↗
8. A. Vieweg, G. Ressel, P. Prevedel, P. Raninger, M. Panzenböck, S. Marsoner and R. Ebner: IOP Conf. Ser.: Mater. Sci. Eng., 2016, Vol. 119, 012019.10.1088/1757-899X/119/1/012019 ↗
9. S.T. Ahn, D.S. Kim and W.J. Nam: Mater. Proc. Tech., 2005, Vol. 160, pp. 54-8.10.1016/j.jmatprotec.2004.03.019 ↗
10. Z.J. Xie, X.P. Ma, C.J. Shang, X.M. Wang and S.V. Subramanian: Mater. Sci. Eng. A, 2015, Vol. 641, pp. 37–44.10.1016/j.msea.2015.05.101 ↗
11. Z.J. Xie, Y.P. Fang, G. Han, H. Guo, R.D.K. Misra and C.J. Shang: Mater. Sci. Eng. A, 2014, Vol. 618, 112-7.10.1016/j.msea.2014.08.072 ↗
12. G. Larzabal, N. Isasti, B. Pereda, J.M. Rodriguez-Ibabe and P. Uranga: Proceedings Materials Science and Technology 2016 Conferesnce, Salt Lake City, Utah, USA, 2016, pp. 499–507, 23–27 Oct.
13. P. Uranga, I. Gutiérrez and B. López: Mater. Sci. Eng. A, 2013, Vol. 578, pp. 174-80.10.1016/j.msea.2013.04.077 ↗
14. B. Mintz, G. Peterson and A. Nassar: Ironmaking Steelmaking, 1994, Vol. 21 No. 3, pp. 215-22.
15. K. Wallin: Research Seminar on Economical and Safe Application of Modern Steels for Pressure Vessels, Aachen, Germany. 2003.
16. N. Isasti, D. Jorge-Badiola, M.L. Taheri and P. Uranga: Metall. Mater. Trans. A, 2014, Vol. 45A, pp. 4960-71.10.1007/s11661-014-2450-7 ↗
17. S.K. Kim, Y.M. Kim, Y.J. Lim and N.J. Kim: Proceedings of 15th Conference on Mechanical Behaviors of Materials, Korea Institute of Metals and Materials, Seoul, Korea, 2001, pp. 177–86.
18. N. Isasti, D. Jorge-Badiola, M.L. Taheri and P. Uranga: Met. Mater. Int., 2014, Vol. 20, pp. 807-17.10.1007/s12540-014-5002-1 ↗
19. P. Cizek, B.P. Wynne, C.H.J. Davies and P.D. Hodgson: Metall Mater Trans A, 2015, Vol. 46A, pp. 407-25.10.1007/s11661-014-2601-x ↗
20. T. Araki, I. Kozasu, H. Tankechi, K. Shibata, M. Enomoto and H. Tamehiro, eds.: Atlas for Bainitic Microstructures, ISIJ, Tokyo, Japan, 1992, vol. 1.
21. B.M. Huang, J.R. Yang, H.W. Yen, C.H. Hsu, C.Y. Huang and H. Mohrbacher: Mat. Sci. Technol., 2014, Vol. 30, pp. 1014-23.10.1179/1743284714Y.0000000536 ↗
22. W.B. Lee, S.G. Hong, C.G. Park, K.H. Kim and S.H. Park: Metall Mater Trans A, 2002, Vol. 33A, pp. 1689-98.10.1007/s11661-002-0178-2 ↗
23. M. Calcagnotto, D. Ponge, E. Demir and D. Raabe: Mater. Sci. Eng. A, 2010, Vol. 257, pp. 2738-46.10.1016/j.msea.2010.01.004 ↗
24. L.P. Kubin and A. Mortensen: Scripta Mater., 2003, vol. 48, pp. 119-25.10.1016/S1359-6462(02)00335-4 ↗
25. G. Larzabal, N. Isasti, J.M. Rodriguez-Ibabe, and P. Uranga: Metals, 2017, vol. 7(2), 65.10.3390/met7020065 ↗
26. N. Isasti, D. Jorge-Badiola, J. Alkorta and P. Uranga: JOM, 2016, Vol. 68, pp, 215-23.10.1007/s11837-015-1677-0 ↗
27. S. Kazuhiro, F. Yoshimasa, and K. Shinijiro: JFE Technical Report. 2007.
28. R.D.K. Misra, H. Nathani, J.E. Hartmann and F. Siciliano: Mater. Sci. Eng. A, 2005, Vol. 394, pp. 339-52.10.1016/j.msea.2004.11.041 ↗
29. M.A. Altuna, A. Iza-Mendia, and I. Gutierrez: Metall. Ital., 2009, pp. 41–7.
30. A.J. DeArdo: Int. Mat. Rev., 2003, Vol. 48, pp. 371-402.10.1179/095066003225008833 ↗
31. V. Thillou, M. Hua, C.I. Garcia, C. Perdrix, and A.J. DeArdo: Mater. Sci. Forum, 1998, Vol. 284-286, pp. 311-8.10.4028/www.scientific.net/MSF.284-286.311 ↗
32. A. Iza-Mendia, M.A. Altuna, B. Pereda and I. Gutierrez: Met. Mater. Trans. A, 2012, Vol. 43, pp. 4553-70.10.1007/s11661-012-1395-y ↗
33. L. Sanz, B. Pereda and B. López: Mat. Sci. Eng. A, 2017, Vol. 685, pp. 377-90.10.1016/j.msea.2017.01.014 ↗
34. S. Zajac, F. Perrard, R. Kuziak, T. Iung, J. Antonissen, J. Kömi and R. Pizarro: Intense precipitation strengthening of bainitic flat and long products—Mechanisms, means and process routes, European Communities, 2009.
35. C.Y. Chen, H.W. Yen, F.H. Kao, W.C. Li, C.Y. Huang, J.R. Yang and S.H. Wang: Mater. Sci. Eng. A, 2009, Vol. 499, pp. 162-6.10.1016/j.msea.2007.11.110 ↗
36. E.V. Pereloma, I.B. Timokhina, M.K. Miller and P.D. Hodgson: Acta Materialia, 2007, Vol. 55, pp. 2587–98.10.1016/j.actamat.2006.12.001 ↗
37. R. Rementeria, J.A. Jimenez, S.Y.P. Allain, G. Geandier, J.D. Poplawsky, W. Guo, E. Urones-Garrote, C. Garcia-Mateo and F.G. Caballero: Acta Materialia, 2017, Vol. 133, pp. 333–45.10.1016/j.actamat.2017.05.048 ↗
38. F.B. Pickering: Physical metallurgy and the design of steels, Applied Science Publishers Ltd., London, United Kingdom, 1978.
39. M. Hayakawa, S. Matsuoka, K. Tsuzaki, H. Hanada and M. Sugisaki: Scr. Mat., 2002, Vol. 47, pp. 655-61.10.1016/S1359-6462(02)00263-4 ↗
40. W.J. Nam, D.S. Kim and S.T. Ahn: J. Mater. Sci., 2003, Vol. 38, pp. 3611-7.10.1023/A:1025625330442 ↗
41. T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, 1997, pp. 62-8.
42. N. Isasti, D. Jorge-Badiola, M.L. Taheri and P. Uranga: Metall. Mater. Trans. A, 2014, Vol. 45A, pp. 4972-82.10.1007/s11661-014-2451-6 ↗