Liquid Film Migration in Warm Formed Aluminum Brazing Sheet
Source abstract
Abstract
Warm forming has previously proven to be a promising manufacturing route to improve formability of Al brazing sheets used in automotive heat exchanger production; however, the impact of warm forming on subsequent brazing has not previously been studied. In particular, the interaction between liquid clad and solid core alloys during brazing through the process of liquid film migration (LFM) requires further understanding. Al brazing sheet comprised of an AA3003 core and AA4045 clad alloy, supplied in O and H24 tempers, was stretched between 0 and 12 pct strain, at room temperature and 523K (250 °C), to simulate warm forming. Brazeability was predicted through thermal and microstructure analysis. The rate of solid–liquid interactions was quantified using thermal analysis, while microstructure analysis was used to investigate the opposing processes of LFM and core alloy recrystallization during brazing. In general, liquid clad was consumed relatively rapidly and LFM occurred in forming conditions where the core alloy did not recrystallize during brazing. The results showed that warm forming could potentially impair brazeability of O temper sheet by extending the regime over which LFM occurs during brazing. No change in microstructure or thermal data was found for H24 sheet when the forming temperature was increased, and thus warm forming was not predicted to adversely affect the brazing performance of H24 sheet.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metal Forming Simulation Techniques · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. H. Zhao and R. Woods, Controlled Atmosphere Brazing of Aluminum in Advances in Brazing - Science, Technology and Applications, D. Sekulic, Ed., Philadelphia, Woodhead Publishing, 2013, pp. 280–92.
2. J. Lacaze, S. Tierce, M. C. Lafont, Y. Thebault, N. Pebere, G. Mankowski, C. Blanc, H. Robidou, D. Vaumousse and D. Daloz, “Study of the microstructure resulting from brazed aluminum materials used in heat exchangers,” Materials Science and Engineering A, Vols. 413–414, pp. 317–21, 2005.10.1016/j.msea.2005.08.187 ↗
3. N. A. Lamboo and P. J. Rozier, “Feasibility of warm drawing of aluminum products,” Journal of Materials Processing Technology, vol. 115, no. 1, pp. 118–121, 2001.10.1016/S0924-0136(01)00743-9 ↗
4. P. A. Tebbe and G. T. Kridli, “Warm forming of aluminium alloys: an overview and future directions,” International Journal of Materials and Product Technology, vol. 21, no. 1-3, pp. 24-40, 2004.10.1504/IJMPT.2004.004737 ↗
5. S. Toros, F. Ozturk and I. Kacar, “Review of warm forming of aluminum-magnesium alloys,” Journal of Materials Processing Technology, vol. 207, no. 1-3, pp. 1-12, 2008.10.1016/j.jmatprotec.2008.03.057 ↗
6. R. Bagheriasl and M. Worswick, “Formability of AA3003 brazing sheet at elevated temperatures: limiting dome height experiments and determination of forming limit diagrams,” International Journal of Material Forming, vol. 8, no. 2, pp. 229-244, 2015.10.1007/s12289-014-1162-2 ↗
7. R. Bagheriasl, K. Ghavam and M. Worswick, “Formability improvement with independent die and punch temperature control,” International Journal of Material Forming, vol. 7, no. 2, pp. 139-154, 2014.10.1007/s12289-012-1115-6 ↗
8. R. Verma, S. Kurukuri, M. J. Worswick and S. Winkler: Effect of Warm Forming on Springback of Aluminum Alloy Sheet in IDDRG Conference, Paris, 2014.
9. R. Verma, R. George, S. Kurukuri, M. Worswick and S. Winkler: Warm Forming Process Study for Reducing Springback in Aluminum Alloy Brazing Sheets in International Deep Drawing Research Group (IDDRG), Shanghai, 2015.
10. D.J. Schmatz, “Grain boundary penetration during brazing of aluminum,” Welding Journal, vol. 62, no. 10, pp. 267-271, 1983.
11. M. Nylen, U. Gustavsson, B. Hutchinson and A. Ortnas, “Mechanistic studied of brazing in clad aluminum alloys,” Materials Science Forum, Vols. 217-222, pp. 1703-1708, 1996.10.4028/www.scientific.net/MSF.217-222.1703 ↗
12. D. M. Turriff, S. F. Corbin and M. Kozdras, “Diffusional solidification phenomena in clad aluminum automotive braze sheet,” Acta Materialia, vol. 58, no. 4, pp. 1332-1341, 2010.10.1016/j.actamat.2009.10.037 ↗
13. Y. Tu, Z. Tong and J. Jiang, “Effect of Microstructure on Diffusional Solidification of 4343/3005/4343 Multi-Layer Aluminum Brazing Sheet,” Metallurgical and Materials Transactions A, vol. 44, no. 4, pp. 1760-1766, 2013.10.1007/s11661-012-1550-5 ↗
14. S. F. Corbin, S. Winkler, D. R. Turriff and M. Kozdras, “Analysis of Fluxless, Reactive Brazing of Al Alloys Using Differential Scanning Calorimetry,” Metall. Mater. Trans. A, vol. 45 pp. 3907-3915, 2014.10.1007/s11661-014-2349-3 ↗
15. R. Woods: Liquid Film Migration During Aluminum Brazing, SAE International, 1997.10.4271/971848 ↗
16. D. Y. Yoon, “Theories and observations of chemically induced interface migration,” International Materials Reviews, vol. 40, no. 4, pp. 149-179, 1995.10.1179/imr.1995.40.4.149 ↗
17. H.S. Yang and R.A. Woods: Mechanisms of Liquid Film Migration (LFM) in Aluminum Brazing Sheet, SAE International, 1997.10.4271/971849 ↗
18. A.J. Wittebrood, R. Benedictus and K. Vieregge: Study of Liquid Film Migration in o-temper aa3005 Brazing Sheet, in 6th International Conference on Aluminum Alloys, Toyohashi, 1998.
19. A. Wittebrood, C. J. Kooij and K. Vieregge, “Grain Boundary Melting or Liquid Film Migration in Brazing Sheet,” Materials Science Forum, Vols. 331-337, pp. 1743-1750, May 2000.10.4028/www.scientific.net/MSF.331-337.1743 ↗
20. J. S. Yoon, S. H. Lee and M. S. Kim, “Fabrication and brazeability of a three-layer 4343/3003/4343 aluminum clad sheet by rolling,” Journal of Materials Processing and Technology, vol. 111, no. 1-3, pp. 85-89, 2001.10.1016/S0924-0136(01)00517-9 ↗
21. A. Wittebrood, S. Desikan, R. Boom and L. Katgerman: Liquid Film Migration in Aluminum Brazing Sheet?, in Materials Science Forum, Trans Tech Publications, vols. 519–521, pp. 1151–56, 2006.10.4028/www.scientific.net/MSF.519-521.1151 ↗
22. S.-H. Kim, J.-H. Kang, K. Euh and H.-W. Kim, “Grain-Structure Evolution of Brazing-Treated A4343/A3003/A4343 Aluminum Brazing Sheets Rolled with Different Reductions,” Metals and Materials International, vol. 21, no. 2, pp. 276-285, 2015.10.1007/s12540-015-4343-8 ↗
23. A. Wittebrood, “Microstructural Changes in Brazing Sheet due to Solid-Liquid Interaction,” Delft University of Technology, Delft, Netherlands, 2009.
24. M. E. Brown, Introduction to Thermal Analysis Techniques and Applications, 1st ed., New York: Chapman and Hall, 1988.10.1007/978-94-009-1219-9 ↗
25. M. L. Kuntz, S. F. Corbin and Y. Zhou, “Quantifying metallurgical interactions in solid/liquid diffusion couples using differential scanning calorimetry,” Acta Materiala, vol. 53, no. 10, pp. 3071-3082, 2005.10.1016/j.actamat.2005.03.018 ↗
26. M. J. Benoit, M. A. Whitney, M. A. Wells and S. Winkler, “Effect of Temperature and Sheet Temper on Isothermal Solidification Kinetics in Clad Aluminum Brazing Sheet,” Metallurgical and Materials Transactions A, 47:4425-4436, 2016.10.1007/s11661-016-3638-9 ↗
27. H. Kokawa, C. H. Lee and T. H. North, “Effect of grain boundaries on isothermal solidification during transient liquid phase brazing,” Metallurgical Transactions A, vol. 22A, no. 7, pp. 1627-1631, 1991.10.1007/BF02667375 ↗
28. W. D. MacDonald and T. W. Eagar, “Isothermal Solidifcation Kinetics of diffusion brazing,” Metallurgical and Materials Transactions A, vol. 29A, no. 1, pp. 315-325, 1998.10.1007/s11661-998-0183-1 ↗
29. M. L. Kuntz, Y. Zhou and S. F. Corbin, “A study of transient liquid-phase bonding of Ag-Cu using differential scanning calorimetry,” Metallurgical and Materials Transactions A, vol. 37A, pp. 2493-2504, 2006.10.1007/BF02586222 ↗
30. M. L. Kuntz, B. Panton, S. Wasiur-Rahman, Y. Zhou and S. F. Corbin, “An experimental study of transient liquid phase bonding of the ternary Ag-Au-Cu system using differential scanning calorimetry,” Metallurgical and Materials Transactions A, vol. 44A, no. 8, pp. 3708-3720, 2013.10.1007/s11661-013-1704-0 ↗
31. D. N. Yoon and W. J. Huppmann, “Chemically driven growth of tungsten grains during sintering in liquid nickel,” Acta Metallurgica, vol. 27, no. 6, pp. 973-977, 1979.10.1016/0001-6160(79)90185-8 ↗
32. M. Kuo and R. A. Fournelle, “Diffusion induced grain boundary migration (DIGM) and liquid film migration (LFM) in an Al-2.07 wt pct Cu alloy,” Acta Metallurgica et Materialia, vol. 39, no. 11, pp. 2835-2845, 1991.10.1016/0956-7151(91)90101-6 ↗
33. W. A. G. McPhee, G. B. Schaffer and J. Drennan, “The effect of iron on liquid film migration and sintering of Al-Cu-Mg alloy,” Acta Materilia, vol. 51, no. 13, pp. 3701-3712, 2003.10.1016/S1359-6454(03)00185-X ↗
34. M. Nylen, U. Gustavsson, B. Hutchinson and A. Karlsson, “The mechanism of braze metal penetration by migration of liquid films in aluminum,” Materials Science Forum, Vols. 331-337, pp. 1737-1742, 2000.10.4028/www.scientific.net/MSF.331-337.1737 ↗
35. F. J. Humphreys and M. Hatherly, Recrystallization and related annealing phenomena, 2nd ed., Oxford: Elsevier, 2004.