journal article·2017-10

Effect of Bath Temperature on Cooling Performance of Molten Eutectic NaNO3-KNO3 Quench Medium for Martempering of Steels

K. M. Pranesh Rao, K. Narayan Prabhu

Publisher page

Abstract

Martempering is an industrial heat treatment process that requires a quench bath that can operate without undergoing degradation in the temperature range of 423 K to 873 K (150 °C to 600 °C). The quench bath is expected to cool the steel part from the austenizing temperature to quench bath temperature rapidly and uniformly. Molten eutectic NaNO3-KNO3 mixture has been widely used in industry to martemper steel parts. In the present work, the effect of quench bath temperature on the cooling performance of a molten eutectic NaNO3-KNO3 mixture has been studied. An Inconel ASTM D-6200 probe was heated to 1133 K (860 °C) and subsequently quenched in the quench bath maintained at different temperatures. Spatially dependent transient heat flux at the metal–quenchant interface for each bath temperature was calculated using inverse heat conduction technique. Heat transfer occurred only in two stages, namely, nucleate boiling and convective cooling. The mean peak heat flux (q max) decreased with increase in quench bath temperature, whereas the mean surface temperature corresponding to q max and mean surface temperature at the start of convective cooling stage increased with increase in quench bath temperature. The variation in normalized cooling parameter t 85 along the length of the probe increased with increase in quench bath temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Radiative Heat Transfer Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. B. Liscic, H.M. Tensi, L.C.F. Canale, and G.E. Totten: Quenching Theory and Technology, 2nd ed., CRC Press, Boca Raton, FL, 2010, pp. 359-443.10.1201/9781420009163 ↗
2. GE Totten, CE Bates, and NA Clinton (1993) Handbook of Quenchants and Quenching Theory. ASM International, Materials Park OH, pp. 291-338.
3. K.N. Prabhu and P. Fernandes: J. Mater. Des., 2007, vol. 28, no. 2, pp. 544-50.10.1016/j.matdes.2005.08.005 ↗
4. Stitch A., Tensi H.M. (1990) VII International Congress for Heat Treatment of Metals, Moscow, pp. 136-50.
5. VU Nayak KN Prabhu (2016) J. Mater. Eng. Perform. 25(4):1474-80.10.1007/s11665-016-1962-2 ↗
6. C. Şimşir and C.H. Gür: Comput. Mater. Sci., 2008, vol. 44, pp. 588-600.10.1016/j.commatsci.2008.04.021 ↗
7. Herring D.H: The HERRING GROUP Inc. Professional Support Services, doctor.com/documents/Vacuum Oil Quenching Tech.pdf, access date 25/07/2016.
8. ASM Handbook Committee: ASM Handbook Volume 4 Heat Treating, ASM International, Materials Park, OH, 1991, pp. 324-66.
9. Park Thermal International Corp., 1996.
10. G.E. Totten, M. Howes, and T. Inoue: Handbook of Residual Stress and Deformation of Steel, ASM International, Materials Park, OH, 2002, pp. 248-330.
11. G.P. Dubal: Adv. Mater. Process., 1999, vol. 156, no. 6, pp. H23-8.
12. Dubal G.P. (2003) Heat Treating Progress 3.
13. Reid B (1996) Park Thermal International Corp.
14. J.W. Raade and D. Padowitz: SolarPaces Conf., 2010, vol. 1, no. 510, pp 1-8.
15. T.S.P. Kumar: Numer. Heat Transfer, Part B, 2004, vol. 45, no. 6, pp. 541-63.10.1080/10407790490277940 ↗
16. R. Gopalan and K.N. Prabhu: Metall. Mater. Trans. B, 2014, vol. 45, no. 4, pp. 1355-69.
17. I. Felde and S. Szenasi: Int. J. Microstruct. Mater. Prop., 2016, vol. 11, nos. 3/4, pp. 288-300.
18. R.B. Miguel, I.M. Machado, F.M. Pereira, P.R. Pagot, and F.H.R. França: Int. J. Heat Mass Transfer, 2016, vol. 102, pp. 816-25.10.1016/j.ijheatmasstransfer.2016.06.051 ↗
19. M.N. Őzisik and H.R.B. Orlande: Inverse Heat Transfer: Fundamentals and Applications, Taylor and Francis, New York, 2000, pp. 35-115.
20. Babu K, Kumar TSP (2012) J. ASTM Int. 9(5):1–12.10.1520/JAI104442 ↗
21. B. Smoljan: J. Mater. Process. Technol., 2006, vol. 175, nos. 1-3, pp. 393-7.10.1016/j.jmatprotec.2005.04.068 ↗