Efficiency of the Inertia Friction Welding Process and Its Dependence on Process Parameters
Source abstract
Abstract
It has been widely assumed, but never proven, that the efficiency of the inertia friction welding (IFW) process is independent of process parameters and is relatively high, i.e., ~70 to 95 pct. In the present work, the effect of IFW parameters on process efficiency was established. For this purpose, a series of IFW trials was conducted for the solid-state joining of two dissimilar nickel-base superalloys (LSHR and Mar-M247) using various combinations of initial kinetic energy (i.e., the total weld energy, E o), initial flywheel angular velocity (ω o), flywheel moment of inertia (I), and axial compression force (P). The kinetics of the conversion of the welding energy to heating of the faying sample surfaces (i.e., the sample energy) vs parasitic losses to the welding machine itself were determined by measuring the friction torque on the sample surfaces (M S) and in the machine bearings (M M). It was found that the rotating parts of the welding machine can consume a significant fraction of the total energy. Specifically, the parasitic losses ranged from 28 to 80 pct of the total weld energy. The losses increased (and the corresponding IFW process efficiency decreased) as P increased (at constant I and E o), I decreased (at constant P and E o), and E o (or ω o) increased (at constant P and I). The results of this work thus provide guidelines for selecting process parameters which minimize energy losses and increase process efficiency during IFW.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. A. Chamanfar, M. Jahazi, and J. Cormier: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 1639–69.10.1007/s11661-015-2752-4 ↗
2. E.D. Nicholas: Weld. World, 2003, vol. 47, pp. 2–9.10.1007/BF03266402 ↗
3. M.M. Attallah and M. Preuss: in Welding and Joining of Aerospace Materials, M.C. Chaturvedi, ed., Woodhead Publishing, Oxford, 2012.
4. Recommended Practices for Friction Welding (AWS Standard), American Welding Society, Miami, FL, 1989.
5. R.J. Reagan: Heat Measurements in Inertia Welding of Aluminum to Steel, DoE Report DE86012463, Oak Ridge National Laboratory, Oak Ridge, TN, 1986.
6. M. Maalekian: Sci. Technol. Weld. Join., 2007, vol. 12, pp. 738–59.10.1179/174329307X249333 ↗
7. W. Liu, F. Wang, X. Yang, and W. Li: Adv. Mater. Sci. Eng., 2013, vol. 2013, pp. 196382(1)–(9).
8. F.F. Wang, W.Y. Li, J.L. Li, and A. Vairis: Int. J. Adv. Manuf. Technol., 2014, vol. 71, pp. 1909–18.10.1007/s00170-013-5569-6 ↗
9. C.J. Bennett, M.M. Attallah, M. Preuss, P.H. Shipway, T.H. Hyde, and S. Bray: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 5054–64.10.1007/s11661-013-1852-2 ↗
10. C. Bennett: J. Manuf. Process., 2015, vol. 18, pp. 84–91.10.1016/j.jmapro.2015.01.003 ↗
11. D.W. Mahaffey, O.N. Senkov, R. Shivpuri, and S.L. Semiatin: Metall. Mater. Trans. A, 2016, vol. 47, pp. 3981–4000.10.1007/s11661-016-3600-x ↗
12. D.F. Wilcock and E.R. Booser: Bearing Design and Application, McGraw-Hill, New York, 1957.
13. B.S. Herbage: in Sixth Turbomachinery Symposium, M.P. Boyce, ed., Texas A&M University Press, College Station, TX, 1977, pp. 33–38.
14. F. Kreith and D.Y. Goswami: The CRC Handbook of Mechanical Engineering, 2nd ed., CRC Press, Boca Raton, FL, 2005.
15. M.B. Mohammed, T.H. Hyde, C.J. Bennett, and E.J. Williams: in 2009 ASME Turbo Expo, June 8, 2009–June 12, 2009, American Society of Mechanical Engineers, Orlando, FL, 2009, pp. 829–37.10.1016/S1350-4789(09)70385-X ↗
16. O.N. Senkov, D.W. Mahaffey, S.L. Semiatin, and C. Woodward: Metall. Mater. Trans. A, 2014, vol. 45, pp. 5545–61.10.1007/s11661-014-2512-x ↗
17. O.N. Senkov, D.W. Mahaffey, S.L. Semiatin, and C. Woodward: J. Mater. Eng. Perform., 2015, vol. 24, pp. 1173–84.10.1007/s11665-014-1379-8 ↗