journal article·2017-06

Mechanism of Martensitic to Equiaxed Microstructure Evolution during Hot Deformation of a Near-Alpha Ti Alloy

Seyed Amir Arsalan Shams, Shamsoddin Mirdamadi, Seyed Mahdi Abbasi, Daehwan Kim, Chong Soo Lee

Publisher page

Abstract

In this study, mechanisms of microstructural evolution during hot deformation of Ti-1100 were investigated by EBSD analysis. Misorientation angle distribution of initial microstructure showed that diffusionless martensitic phase transformation in Ti-1100 obeys Burgers orientation relationship, and most of the high-angle-grain boundaries consist of angles of 60 and 63 deg. Calculated activation energy of hot deformation (~338 kJ/mol) and EBSD grain boundary maps revealed that continuous dynamic recrystallization (CDRX) is the dominant mechanism during hot compression at 1073 K (800 °C) and strain rate of 0.005 s−1. At a temperature range of 1073 K to 1173 K (800 °C to 900 °C), not only the array of variants lying perpendicular to compression axis but also CDRX contributes to flow softening. Increasing the rolling temperature from 1123 K to 1273 K (850 °C to 1000 °C) brought about changes in spheroidization mechanism from CDRX to conventional boundary splitting and termination migration correlated with the higher volume fraction of beta phase at higher temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. [1] J. C. Williams and E. A. Starke: Acta Mater., 2003, vol. 51, pp. 5775–99.10.1016/j.actamat.2003.08.023 ↗
2. [2] P Vo, M Jahazi, and S Yue: Metall. Mater. Trans. A, 2008, vol. 39, pp. 2965–80.10.1007/s11661-008-9666-3 ↗
3. [3] J B Newkirk and A H Geisler: Acta Metall., 1953, vol. 1, pp. 370–74.10.1016/0001-6160(53)90113-8 ↗
4. C.H. Park, J.-W. Park, J.-T. Yeom, Y.S. Chun, C. S. Lee: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4914–19.10.1016/j.msea.2010.04.057 ↗
5. C.H. Park, B. Lee, S. L. Semiatin, and C.S. Lee: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5203–11.10.1016/j.msea.2010.04.082 ↗
6. H. Margolin and Cohen, P.: in Titan. ’80 Sci. Technol., H. Kimura and O. Izumi, eds., TMS, Warrendale, PA, 1980, pp. 2991–97.
7. [7] I. Weiss, F. H. Froes, D. Eylon, and G. E. Welsch: Metall. Trans. A, 1986, vol. 17, pp. 1935–47.10.1007/BF02644991 ↗
8. [8] S. L. Semiatin, V. Seetharaman, and I. Weiss: Mater. Sci. Eng. A, 1999, vol. 263, pp. 257–71.10.1016/S0921-5093(98)01156-3 ↗
9. [9] N. Stefansson and S. L. Semiatin: Metall. Mater. Trans. A, 2003, vol. 34, pp. 691–98.10.1007/s11661-003-0103-3 ↗
10. [10] S. L. Semiatin, N. Stefansson, and R. D. Doherty: Metall. Mater. Trans. A, 2005, vol. 36, pp. 1372–76.10.1007/s11661-005-0229-6 ↗
11. [11] I. Balasundar, T. Raghu, and B. P. Kashyap: Int. J. Mater. Form., 2015, vol. 8, pp. 85–97.10.1007/s12289-013-1150-y ↗
12. CH Park, JW Won, J-W Park, S. L. Semiatin, and CS Lee: Metall. Mater. Trans. A, 2012, vol. 43, pp. 977–85.10.1007/s11661-011-1019-y ↗
13. [13] D He, J C Zhu, Z H Lai, Y Liu, and X W Yang: Mater. Des., 2013, vol. 46, pp. 38–48.10.1016/j.matdes.2012.09.045 ↗
14. [14] S. Zherebtsov, M. Murzinova, G. A. Salishchev, and S. L. Semiatin: Acta Mater., 2011, vol. 59, pp. 4138–50.10.1016/j.actamat.2011.03.037 ↗
15. H Matsumoto, L Bin, S-H Lee, Y Li, and Y Ono: Metall. Mater. Trans. A, 2013, vol. 44, pp. 3245–60.10.1007/s11661-013-1655-5 ↗
16. CH Park, JH Kim, J-T Yeom, C-S Oh, S. L. Semiatin, and CS Lee: Scr. Mater., 2013, vol. 68, pp. 996–99.10.1016/j.scriptamat.2013.02.055 ↗
17. [17] Qi Chao, Peter D. Hodgson, and Hossein Beladi: Metall. Mater. Trans. A, 2014, vol. 45, pp. 2659–71.10.1007/s11661-014-2205-5 ↗
18. [18] E. B. Shell and S. L. Semiatin: Metall. Mater. Trans. A, 1999, vol. 30, pp. 3219–29.10.1007/s11661-999-0232-4 ↗
19. [19] P. J. Bania: JOM, 1988, vol. 40, pp. 20–22.10.1007/BF03258935 ↗
20. [20] T. Seshacharyulu, S. C. Medeiros, W. G. Frazier, and Y. V. R. K. Prasad: Mater. Sci. Eng. A, 2002, vol. 325, pp. 112–25.10.1016/S0921-5093(01)01448-4 ↗
21. [21] N. Stefansson, S. L. Semiatin, and D. Eylon: Metall. Mater. Trans. A, 2002, vol. 33, pp. 3527–34.10.1007/s11661-002-0340-x ↗
22. [22] S. C. Wang, M. Aindow, and M. J. Starink: Acta Mater., 2003, vol. 51, pp. 2485–2503.10.1016/S1359-6454(03)00035-1 ↗
23. [23] Hossein Beladi, Qi Chao, and Gregory S. Rohrer: Acta Mater., 2014, vol. 80, pp. 478–89.10.1016/j.actamat.2014.06.064 ↗
24. [24] N. Gey and M. Humbert: Acta Mater., 2002, vol. 50, pp. 277–87.10.1016/S1359-6454(01)00351-2 ↗
25. [25] P Dadras and JF Thomas: Metall. Trans. A, 1981, vol. 12, pp. 1867–76.10.1007/BF02643797 ↗
26. [26] A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, and S. Yue: Mater. Sci. Eng. A, 2014, vol. 615, pp. 497–510.10.1016/j.msea.2014.07.093 ↗
27. [27] R. L. Goetz and S. L. Semiatin: J. Mater. Eng. Perform., 2001, vol. 10, pp. 710–17.10.1361/105994901770344593 ↗
28. CH Park, K-T Park, DH Shin, and CS Lee: Mater. Trans., 2008, vol. 49, pp. 2196–2200.10.2320/matertrans.L-MRA2008832 ↗
29. [29] F. J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Second, Elsevier Ltd, Oxford, 2004.
30. MA Shafaat, H Omidvar, and B Fallah: Mater. Des., 2011, vol. 32, pp. 4689–95.10.1016/j.matdes.2011.06.048 ↗
31. [31] R. M. Miller, T. R. Bieler, and S. L. Semiatin: Scr. Mater., 1999, vol. 40, pp. 1387–93.10.1016/S1359-6462(99)00061-5 ↗
32. CH Park, JH Kim, Y-T Hyun, J-T Yeom, and N.S. Reddy: J. Alloys Compd., 2014, vol. 582, pp. 126–29.10.1016/j.jallcom.2013.08.041 ↗
33. [33] S. L. Semiatin and MW Corbett: Metall. Mater. Trans. A, 2006, vol. 37, pp. 1125–36.10.1007/s11661-006-1091-x ↗
34. [34] Binguo Fu, Hongwei Wang, Chunming Zou, and Zunjie Wei: Mater. Charact., 2015, vol. 99, pp. 17–24.10.1016/j.matchar.2014.09.015 ↗
35. [35] G. Lütjering and J. C. Williams: Titanium, second, Springer Berlin Heidelberg, Berlin, Heidelberg, 2007.
36. [36] S. L. Semiatin, K. A. Lark, D. R. Barker, V. Seetharaman, and B. Marquardt: Metall. Trans. A, 1992, vol. 23, pp. 295–305.10.1007/BF02660872 ↗
37. A Hajari, M Morakabati, SM Abbasi, and H Badri: Mater. Sci. Eng. A, 2017, vol. 681, pp. 103–13.10.1016/j.msea.2016.11.002 ↗
38. [38] E Farabi, A Zarei-hanzaki, M H Pishbin, and M Moallemi: Mater. Sci. Eng. A, 2015, vol. 641, pp. 360–68.10.1016/j.msea.2015.06.042 ↗
39. M. Peters, J. Hemptenmacher, J. Kumpfert, C. Leyens: Titanium and Titanium Alloys, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, FRG, 2003.