Deformation Behavior in Medium Mn Steel of Nanometer-Sized α′ + γ Lamellar Structure
Source abstract
Abstract
Yielding and work-hardening phenomena in an Fe-10.62Mn-2.84Al-0.17C-0.5Mo steel, which is composed of nanometer-sized lamellae of α′ and γ, are described on the basis of the Hall–Petch relations. Unlike the general expectation, yielding in the steel, which consists of lamellae of α′ and mechanically stable γ, occurs through the propagation of pileup dislocations from α′ to γ. However, when γ is mechanically unstable, yielding occurs through the stress-assisted martensitic transformation (SAMT) within the unstable γ region, resulting in a low YS of about 500 MPa. The overall prominent work-hardening behavior of this steel after yielding is due to the active SAMT, which does not accompany the increase in mobile dislocation density and so causes the high elastic strain rate. The carbon partitioning treatment increases the SAMT starting strength to about 980 MPa, which is caused by the mechanical stabilization of γ. The overall low work-hardening behavior of this case is mainly attributed to the active propagation of pile-up dislocation from α′ to γ which causes the high plastic strain rate through the abrupt increase of mobile dislocation density.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. M. Rashid: Ann. Rev. Mater. Sci., 1981, vol. 11, pp. 245–66.10.1146/annurev.ms.11.080181.001333 ↗
2. Z.H. Jiang, Z.Z. Guan, and J.S. Lian: Mater. Sci. Eng. A, 1995, vol. 190, pp. 55–64.10.1016/0921-5093(94)09594-M ↗
3. R. Davies: Metall. Trans. A, 1978, vol. 9A, pp. 671–79.10.1007/BF02659924 ↗
4. L.F. Ramos, D.K. Matlock, and G. Krauss: Metall. Mater. Trans. A, 1979, vol. 10A, pp. 259–61.10.1007/BF02817636 ↗
5. G. Tither and M. Lavite: J. Metall., 1975, vol. 27, pp. 15–23.
6. P. Movahed, S. Kolahgar, S. Marashi, M. Pouranvari, and N. Parvin: Mater. Sci. Eng. A, 2009, vol. 518, pp. 1–6.10.1016/j.msea.2009.05.046 ↗
7. U. Liedl, S. Traint, and E. Werner: Comput. Mater. Sci., 2002, vol. 25, pp. 122–28.10.1016/S0927-0256(02)00256-2 ↗
8. N. Balliger and T. Gladman: Met. Sci., 1981, vol. 15, pp. 95–108.10.1179/030634581790426615 ↗
9. J.H. Chung, J.B. Jeon, and Y.W. Chang: Metall. Mater. Int., 2010, vol. 16, pp. 533–41.10.1007/s12540-010-0803-3 ↗
10. O. Bouaziz, S. Allain, C. Scott, P. Cugy, and D. Barbier: Curr. Opin. Solid State Mater. Sci., 2011, vol. 15, pp. 141–68.10.1016/j.cossms.2011.04.002 ↗
11. L. Rémy and A. Pineau: Mater. Sci. Eng., 1976, vol. 26, pp. 123–32.10.1016/0025-5416(76)90234-2 ↗
12. A. Saeed-Akbari: Mechanism Maps, Mechanical Properties, and Flow Behavior in High-Manganese TRIP/TWIP and TWIP Steels, Shaker Verlag, Aachen, 2011.
13. A. Saeed-Akbari, L. Mosecker, A. Schwedt, and W. Bleck: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1688–1704.10.1007/s11661-011-0993-4 ↗
14. A. Saeed-Akbari, A. Schwedt, and W. Bleck: Scripta Mater., 2012, vol. 66, pp. 1024–29.10.1016/j.scriptamat.2011.12.041 ↗
15. L. Rémy and A. Pineau: Mater. Sci. Eng., 1977, vol. 28, pp. 99–107.10.1016/0025-5416(77)90093-3 ↗
16. S. Curtze and V.-T. Kuokkala: Acta Mater., 2010, vol. 58, pp. 5129–41.10.1016/j.actamat.2010.05.049 ↗
17. T.H. Lee, E.J. Shin, H.Y. Ha, C.S. Oh, and S.-J. Kim: Acta Mater., 2010, vol. 58, pp. 3173–86.10.1016/j.actamat.2010.01.056 ↗
18. K.-T. Park, G. Kim, S.-K. Kim, S.W. Lee, S.W. Hwang, and C.S. Lee: Metall. Mater. Int., 2010, vol. 16, pp. 1–6.10.1007/s12540-010-0001-3 ↗
19. B. Cullity and S. Stock: Elements of X-Ray Diffraction, 3rd ed., Prentice-Hall, NJ, 2001, pp. 363–84.
20. Y. Guo, Z. Li, C. Yao, K. Zhang, F. Lu, K. Feng, J. Huang, M. Wang, and Y. Wu: Mater. Des., 2014, vol. 63, pp. 100–08.10.1016/j.matdes.2014.05.041 ↗
21. D. Dyson and B. Holmes: J. Iron Steel Inst., 1970, vol. 208, pp. 469–74.
22. Y.-U. Heo, M. Takeguchi, K. Furuya, and H.-C. Lee: Acta Mater., 2009, vol. 57, pp. 1176-87.10.1016/j.actamat.2008.10.056 ↗
23. Y.-U. Heo, D.-W. Suh, and H.-C. Lee: Acta Mater., 2014, vol. 77, pp. 236–47.10.1016/j.actamat.2014.05.057 ↗
24. A.J. Bogers and W.G. Burgers: Acta Metall., 1964, vol. 12, pp. 255–61.10.1016/0001-6160(64)90194-4 ↗
25. W. Sylwestrowicz and E.O Hall: Proc. Phys. Soc., 1951, vol. B64, pp. 495–502.10.1088/0370-1301/64/6/305 ↗
26. N.H. Heo, Y.-U. Heo, and S.-J. Kim: ISIJ Int., 2016, vol. 56, pp. 1096–1101.
27. J. Benito, J. Jorba, J. Manero, and A. Roca: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3317–24.10.1007/s11661-005-0006-6 ↗
28. H. Ledbetter and S. Kim: Mater. Sci. Eng. A, 1988, vol. 101, pp. 87–92.
29. H. Conrad, S. Feuerstein, and L. Rice: Mater. Sci. Eng., 1967, vol. 2, pp. 157–68.10.1016/0025-5416(67)90032-8 ↗
30. D.T. Narutani and J. Takamura: Acta Metall., 1991, vol. 39, pp. 2037–49.10.1016/0956-7151(91)90173-X ↗
31. M. Etou, S. Fukushima, T. Sasaki, Y. Haraguchi, K. Miyata, M. Wakita, T. Tomida, N. Imai, M. Yoshida, and Y. Okada: ISIJ Int., 2008, vol. 48, pp. 1142–47.10.2355/isijinternational.48.1142 ↗
32. R. Armstrong, I. Codd, R.M. Douthwaite, and N.J. Petch: Phil. Mag., 1962, vol. 7, pp. 45–58.10.1080/14786436208201857 ↗
33. M.J. Roberts: Metall. Trans., 1970, vol. 1, pp. 3287–94.10.1007/BF03037855 ↗
34. Y. Xiaoyun, C. Liqing, Z. Yang, D. Hongshuang, and Z. Fuxian: Proc. Eng., 2014, vol. 81, pp. 143–48.10.1016/j.proeng.2014.09.141 ↗
35. D. Music, T. Takahashi, L. Vitos, C. Asker Göransson, I.A. Abrikosov, and J.M. Schneider: Appl. Phys. Lett., 2007, vol. 91, p. 191904.10.1063/1.2807677 ↗
36. H. Zhang, M.P. Punkkinen, B. Johansson, S. Hertzman, and L. Vitos: Phys. Rev. B, 2010, vol. 81, p. 184105.10.1103/PhysRevB.81.184105 ↗
37. J.W. Morris Jr., Z. Guo, C.R. Krenn, and Y.-H. Kim: ISIJ Int., 2001, vol. 41, pp. 599–611.10.2355/isijinternational.41.599 ↗
38. A.N. Stroh: Proc. R. Soc. London, 1954, vol. 223, pp. 404–14.10.1098/rspa.1954.0124 ↗
39. E. Smith and J.T. Barnby: Met. Sci., 1967, vol. 1, pp. 56–64.10.1179/msc.1967.1.1.56 ↗
40. R.E. Reed-Hill: Physical Metallurgy Principles, 3rd ed., PWS Publishing Company, Boston, MA, 1992, pp. 660–61.