journal article·2016-12Open access

Crystallographic Analysis of Nucleation at Hardness Indentations in High-Purity Aluminum

Chaoling Xu, Yubin Zhang, Fengxiang Lin, Guilin Wu, Qing Liu, Dorte Juul Jensen

Abstract

Nucleation at Vickers hardness indentations has been studied in high-purity aluminum cold-rolled 12 pct. Electron channeling contrast was used to measure the size of the indentations and to detect nuclei, while electron backscattering diffraction was used to determine crystallographic orientations. It is found that indentations are preferential nucleation sites. The crystallographic orientations of the deformed grains affect the hardness and the nucleation potentials at the indentations. Higher hardness gives increased nucleation probabilities. Orientation relationships between nuclei developed at different indentations within one original grain are analyzed and it is found that the orientation distribution of the nuclei is far from random. It is suggested that it relates to the orientations present near the indentation tips which in turn depend on the orientation of the selected grain in which they form. Finally, possible nucleation mechanisms are briefly discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Microstructure and mechanical properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D. Juul Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, A.D Rollett: Mater. Sci. Eng. A, 1997, Vol. 7, pp. 1564-83.
2. H. Paul, M.M. Miszczyk and J.H Driver: 36th Risø International Symposium on Materials Science, IOP Conference Series: Mater. Sci. Eng., 2015, Vol. 89, pp. 012010.10.1088/1757-899X/89/1/012010 ↗
3. T.O. Mulhearn: J. Mech. Phys. Solids, 1959 Vol. 7, pp. 85-96.10.1016/0022-5096(59)90013-4 ↗
4. M. Rester, C. Motz and R. Pippan: Scripta Mater., 2008, Vol. 59, pp. 742-5.10.1016/j.scriptamat.2008.06.003 ↗
5. A.S. Keh: J. Appl. Phys., 1960, Vol. 31, pp. 1538-45.10.1063/1.1735889 ↗
6. R. Hill, E.H. Lee and S.J. Tupper: Proc. Roy. Soc., 1947, Vol. 191, pp. 278-303.10.1098/rspa.1947.0116 ↗
7. L.E. Samuels and T.O. Mulhearn: J. Mech. Phys. Solids, 1957,Vol. 5, pp. 125-34.10.1016/0022-5096(57)90056-X ↗
8. M. Rester, C. Motz and R. Pippan: Acta Mater., 2007, Vol. 55, pp. 6427-35.10.1016/j.actamat.2007.08.001 ↗
9. E. Demir, D. Raabe, N. Zaafarani and S. Zaefferer: Acta Mater., 2009, Vol. 57, pp. 559-69.10.1016/j.actamat.2008.09.039 ↗
10. C. Zambaldi, F. Roters, D. Raabe and U. Glatzel: Mater. Sci. Eng. A, 2007, Vol. 454-455, pp. 433-40.10.1016/j.msea.2006.11.068 ↗
11. G. Xie, L. Wang, J. Zhang and L.H. Lou: Scripta Mater., 2011, Vol. 66, pp. 378-81.10.1016/j.scriptamat.2011.11.037 ↗
12. F. Granzer and G. Haase: Zeitschrift fiir Physik, 1961, Vol. 162, pp. 468-82.10.1007/BF01337519 ↗
13. D. Eylon, A. Rosen and S. Niedzwiedz: Acta Metall., 1969, Vol. 17, pp. 1013-19.10.1016/0001-6160(69)90047-9 ↗
14. J. Gruber, H.M. Miller, T.D. Hoffmann, G.S. Rohrer and A.D. Rollett: Acta Mater., 2009, Vol. 57, pp. 6102-12.10.1016/j.actamat.2009.08.036 ↗
15. O. Mishin, B. Bay, G. Winther and D. Juul Jensen: Acta Mater., 2004, Vol. 52, pp. 5761-70.10.1016/j.actamat.2004.08.028 ↗
16. Q. Liu, D.J. Jensen and N. Hansen: Acta mater., 1998, Vol. 46, pp. 5819-38.10.1016/S1359-6454(98)00229-8 ↗
17. C.L. Xu, Y.B. Zhang, G.L. Wu, Q. Liu, and D. Juul Jensen: 36th Risoe International Symposium on Materials Science, IOP Conference Series: Mater. Sci. Eng., 2015, Vol. 89, pp. 012054.10.1088/1757-899X/89/1/012054 ↗
18. N. Hansen and X. Huang : Acta Mater., 1998, Vol. 46, pp. 1827-36.10.1016/S1359-6454(97)00365-0 ↗
19. J.J. Roa, G. Fargas, A. Mateo and E. Jimenez-Pique: Mater. Sci. Eng. A, 2015, Vol. 645, pp. 188-95.10.1016/j.msea.2015.07.096 ↗
20. V. Randle, N. Hansen, and D. Juul Jensen: Phil. Mag. A, 1996, Vol. 73, pp. 265-82.10.1080/01418619608244382 ↗
21. N. Hansen and D. Juul Jensen: Mater. Sci. Tech., 2011, Vol. 27, pp. 1229-40.10.1179/1743284711Y.0000000046 ↗
22. X. Huang and G. Winther: Phil. Mag., 2007, Vol. 87, pp. 5189-214.10.1080/14786430701652851 ↗
23. F.X. Lin, A. Godfrey and G. Winther: Scripta Mater., 2009, Vol. 61, pp. 237-40.10.1016/j.scriptamat.2009.03.046 ↗
24. A. Godfrey, O. Mishin and T.B. Yu: 36th Risoe International Symposium on Materials Science, IOP Conference Series: Mater. Sci. Eng., 2015, Vol. 89, pp. 012003.10.1088/1757-899X/89/1/012003 ↗
25. W.D. Nix and H.J. Gao: J. Mech. Phys. Solids, 1998, Vol. 46, pp. 411-25.10.1016/S0022-5096(97)00086-0 ↗
26. J.G. Swadener, E.P. George and G.M. Pharr: J. Mech. Phys. Solids, 2001, Vol. 50, pp. 681-94.10.1016/S0022-5096(01)00103-X ↗
27. J.C.M. Li: J. Appl. Phys.,1962, Vol. 33, pp.2958-65.10.1063/1.1728543 ↗
28. P.A. Beck and P.R. Sperry: J. Appl. Phys., 1950, Vol. 21, pp.150-2.10.1063/1.1699614 ↗
29. J.E. Bailey and P.B. Hirsch: Proc. Roy. Soc. A, 1962, Vol. 267, pp. 11-30.10.1098/rspa.1962.0080 ↗
30. R.W. Cahn: Proc. Phys. Soc. A,1950, Vol. 63, pp. 323-6.10.1088/0370-1298/63/4/302 ↗
31. P.A. Beck: J. Appl. Phys., 1949, Vol.20, pp.633-4.10.1063/1.1698446 ↗
32. A.H. Cottrell: Progr. Met. Phys., 1953, Vol. 4, pp. 205-64.10.1016/0502-8205(53)90018-5 ↗