journal article·2016-11

Influence of the Initial Microstructure on the Reverse Transformation Kinetics and Microstructural Evolution in Transformation-Induced Plasticity–Assisted Steel

Jeong In Kim, Joo Hyun Ryu, Sea Woong Lee, Kyooyoung Lee, Yoon-Uk Heo, Dong-Woo Suh

Publisher page

Abstract

The reverse transformation behavior upon heating to intercritical temperature was studied in Fe-0.21C-2.2Mn-1.5Si (wt pct) alloy with three initial microstructures. One is the cold-rolled (CR) structure and two others are martensite having different fractions of retained austenite. The CR structure exhibits slower reverse transformation kinetics than martensite due to the lesser population of potent nucleation sites and coarse cementite particles. The film type of retained austenite at the martensite lath boundary contributes to the earlier start of the reverse transformation, because it can proceed as the growth of pre-existing retained austenite, which makes the nucleation process less critical. Besides, the growth of interlath austenite plays an essential role in the evolution of fine lath-type reverse-transformed microstructure, which was difficult to obtain from similar initial microstructures of martensite having negligible fraction of interlath austenite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. 1. H.K.D.H. Bhadeshia and R. Honeycombe: Steels: Microstructure and Properties, 3rd ed., Elsevier, Oxford, United Kingdom, 2006.
2. 2. B.C. De Cooman, J.G. Speer, I.Y. Pyshmintsev, and N. Yoshinaga: Materials Design—The Key to Modern Steel Products, GRIPS Media GmbH, Bad Harzburg, Germany, 2007.
3. 3. J. Bouquerel, K. Verbeken, and B.C. De Cooman: Acta Mater., 2006, vol. 54, pp. 1443–56.10.1016/j.actamat.2005.10.059 ↗
4. 4. T. De Cock, J.P. Ferrer, C. Capdevila, F.G. Caballero, V. López, and C. García de Andrés: Scripta Mater., 2006, vol. 55, pp. 441–43.10.1016/j.scriptamat.2006.05.027 ↗
5. 5. C.P. Scott and J. Drillet: Scripta Mater., 2007, vol. 56, pp. 489–92.10.1016/j.scriptamat.2006.11.033 ↗
6. 6. B.C. De Cooman: Curr. Opin., Solid State Mater. Sci., 2004, vol. 8, pp. 285–303.
7. 7. D.W. Suh, S.J. Park, C.S. Oh, and S.J. Kim: Scripta Mater., 2007, vol. 57, pp. 1097–1100.10.1016/j.scriptamat.2007.08.022 ↗
8. 8. C. Jing, D.W. Suh, C.S. Oh, Z. Wang, and S.J. Kim: Met. Mater. Int., 2007, vol. 13, pp. 13–19.10.1007/BF03027817 ↗
9. 9. D.W. Suh, S.J. Park, and S.J. Kim: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2015–19.10.1007/s11661-008-9583-5 ↗
10. 10. D.W. Suh, S.J. Park, T.H. Lee, C.S. Oh, and S.J. Kim: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 397–408.10.1007/s11661-009-0124-7 ↗
11. 11. J.H. Ryu, J.I. Kim, H.S. Kim, C.S. Oh, H.K.D.H. Bhadeshia, and D.W. Suh: Scripta Mater., 2013, vol. 68, pp. 933–36.10.1016/j.scriptamat.2013.02.026 ↗
12. 12. H.L. Yi, K.Y. Lee, and H.K.D.H. Bhadeshia: Proc. R. Soc. A, 2011, vol. 467, pp. 234–43.10.1098/rspa.2010.0127 ↗
13. 13. V.T. Duong, Y.Y. Song, K.S. Park, H.K.D.H. Bhadeshia, and D.W. Suh: Metall. Mater. Trans. A, 2014, vol. 45, pp. 4201–09.10.1007/s11661-014-2405-z ↗
14. 14. K. Sugimoto, A. Nagasaka, M. Kobayashi, and S. Hashimoto: ISIJ Int., 1999, vol. 39, pp. 56–63.10.2355/isijinternational.39.56 ↗
15. 15. K. Sugimoto, T. Iida, J. Sakaguchi, and T. Kashima: ISIJ Int., 2000, vol. 40, pp. 902–08.10.2355/isijinternational.40.902 ↗
16. 16. K. Sugimoto, K. Nakano, S.M. Song, and T. Kashima: ISIJ Int., 2002, vol. 42, pp. 450–55.10.2355/isijinternational.42.450 ↗
17. 17. K. Sugimoto, J. Sakaguchi, T. Iida, and T. Kashima: ISIJ Int., 2000, vol. 40, pp. 920–26.10.2355/isijinternational.40.920 ↗
18. 18. K. Sugimoto, A. Kanda, R. Kikuchi, S. Hashimoto,T. Kashima, and S. Ikeda: ISIJ Int., 2002, vol. 42, pp. 910–15.10.2355/isijinternational.42.910 ↗
19. 19. K. Sugimoto, B. Yu, Y. Mukai, and S. Ikeda: ISIJ Int., 2005, vol. 45, pp. 1194–1200.10.2355/isijinternational.45.1194 ↗
20. 20. J.J. Yi, I.S. Kim, and H.S. Choi: Metall. Trans. A, 1985, vol. 16A, pp. 1237–45.10.1007/BF02670328 ↗
21. 21. R. Wei, M. Enomoto, R. Hadian, H.S. Zurob, and G.R. Purdy: Acta Mater., 2013, vol. 61, pp. 697–707.10.1016/j.actamat.2012.10.019 ↗
22. 22. T. Tsuchiyama, Y. Miyamoto, and S. Takaki: ISIJ Int., 2001, vol. 41, pp. 1047–52.10.2355/isijinternational.41.1047 ↗
23. 23. M. Natori, Y. Futamura, T. Tsuchiyama, and S. Takaki: Scripta Mater., 2005, vol. 53, pp. 603–08.10.1016/j.scriptamat.2005.04.025 ↗
24. 24. T. Tsuchiyama, M. Natori, N. Nakada, and S. Takaki: ISIJ Int., 2010, vol. 50, pp. 771–73.10.2355/isijinternational.50.771 ↗
25. 25. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789–99.10.1016/S1359-6454(02)00577-3 ↗
26. 26. S. Morito, X. Huang, T. Furuhara, T. Maki, and N. Hansen: Acta Mater., 2006, vol. 54, pp. 5323–31.10.1016/j.actamat.2006.07.009 ↗
27. 27. H. Kitahara, R. Ueji, N. Tsuji, and Y. Minamino: Acta Mater., 2006, vol. 54, pp. 1279–88.10.1016/j.actamat.2005.11.001 ↗
28. 28. I.V. Isaichev: Z. Tekh. Fiz., 1947, vol. 17, pp. 835–38.
29. 29. M.X. Zhang and P.M. Kelly: Acta Mater., 1998, vol. 46, pp. 4081–91.10.1016/S1359-6454(98)00046-9 ↗
30. 30. N. Zhong, X. Wang, Z. Guo, and Y. Rong: J. Mater. Sci. Technol., 2011, vol. 27, pp. 475–80.10.1016/S1005-0302(11)60094-7 ↗
31. 31. R. Kapoor and I.S. Batra: Mater. Sci. Eng. A, 2004, vol. 371, pp. 324–34.10.1016/j.msea.2003.12.023 ↗
32. 32. N. Nakada, K. Mizutani, T. Tsuchiyama, and S. Takaki: Acta Mater., 2014, vol. 65, pp. 251–58.10.1016/j.actamat.2013.10.067 ↗
33. K. Ozaki, T. Urita, and Y. Matsuda: Heat Treating: Proc. 20th Conf., 2000, vol. 1, pp. 177–82.
34. 34. M. Calcagnotto, D. Ponge, and D. Raabe: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 37–46.10.1007/s11661-011-0828-3 ↗
35. 35. H. Azizi-Alizamini, M. Militzer, and W.J. Poole: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1544–57.10.1007/s11661-010-0551-5 ↗
36. 36. A. Karmakar, A. Karani, S. Patra, and D. Chakrabarti: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2041–52.10.1007/s11661-012-1556-z ↗