Ultra-High-Strength Interstitial-Free Steel Processed by Equal-Channel Angular Pressing at Large Equivalent Strain
Source abstract
Abstract
The billets of interstitial-free (IF) steel are deformed by equal-channel angular pressing (ECAP) at 298 K (25 °C) adopting the route BC up to an equivalent strain (e vm) of 24. The evolution of microstructures and their effects on the mechanical properties are examined. The microstructural refinement involves the elongation of grains, the subdivision of grains to the bands with high dislocation density, and the splitting of bands into the cell blocks and then cell blocks into the cells. The widths of the bands and the size of cells decrease with strain. The degree of reduction in the grain size is highest at the low strain level. However, most of the boundaries at this stage are of low-angle boundaries (at e vm = 3). Thereafter, the misorientation angle increases by progressive lattice rotation with strain. The coarse bands transform step by step from the lamellar structure to the ribbon-shaped grains and finally to the near-equiaxed grain structures with the subgrains of a saturated low-angle grain boundary fraction of 0.34 at very large strain >15. The as-received coarse-grained microstructure (grain size of 57.6 ± 21 µm) has been refined to 257 ± 48 nm at an equivalent strain of 24. The strength increases considerably up to e vm = 3 due to grain refinement and high dislocation density. However, the strengthening at later stages is mainly due to the increase in misorientation angle and refinement. Initial yield strength of 227 MPa is increased to a record value of 895 MPa on straining up to e vm = 24 at 298 K (25 °C). Uniform elongation decreases drastically at low equivalent strain but it regains marginally later. The ECAPed sample fails by a ductile fracture at e vm = 0.6 to 6 but by a mixed mode of ductile–brittle fracture at larger strain of 9 to 24.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Surface Treatment and Residual Stress · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. 1. S. Hoile, Mater. Sci. Technol., 2000, vol. 16, pp. 1079-93.10.1179/026708300101506902 ↗
2. 2. G. Purcek, O. Saray, Ibrahim Karaman and H. J. Maier, Metall. Mater. Trans. A, 2012, vol. 43, pp. 1884-94.10.1007/s11661-011-1063-7 ↗
3. 3. R. Song, D. Ponge, D. Raabe, J.G. Speer and D.K. Matlock, Mater. Sci. Eng. A 2006, vol. 441, pp. 1–17.10.1016/j.msea.2006.08.095 ↗
4. 4. R.Z. Valiev and T.G. Langdon, Prog. Mater. Sci. 2006, vol. 51, pp. 881–981.10.1016/j.pmatsci.2006.02.003 ↗
5. 5. O. Saray, Gencaga Purcek, Ibrahim Karaman and H. J. Maier, Metall. Mater. Trans. A, 2013, vol. 44, pp. 4194-4206.10.1007/s11661-013-1781-0 ↗
6. 6. Yoshinori Iwahashi, Zenji Horita, Minoru Nemoto, T. G.Langdon, Acta Mater. 1998,vol. 46, pp. 3317-3331.10.1016/S1359-6454(97)00494-1 ↗
7. 7. A. A. Gazder, Wenquan Cao, H.J. Davies Christopher and E. V. Pereloma, Mater. Sci. Eng. A, 2008, vol. 497, pp. 341–52.10.1016/j.msea.2008.07.030 ↗
8. 8. Saiyi Li, A. A.Gazder, I. J. Beyerlein and H.J. Davies Christopher, Pereloma E. V., Acta Mater., 2007, vol. 55, pp. 1017–32.10.1016/j.actamat.2006.09.022 ↗
9. 9. J. De Messemaeker, B. Verlinden and J. Van Humbeeck, Acta Mater., 2005, vol. 53, pp. 4245-47.10.1016/j.actamat.2005.05.024 ↗
10. 10. Saiyi Li, A.A. Gazder, Irene J. Beyerlein, E. V. Pereloma and H.J. Davies Christopher, Acta Mater., 2006, vol. 54, pp. 1087-1100.10.1016/j.actamat.2005.10.042 ↗
11. A.A. Gazder, F. Dalla Torre, C.F. Gu, C.H.J. Davies and E.V. Pereloma, Mater. Sci. Eng. A, 2006, vol. 415, pp. 126-139.10.1016/j.msea.2005.09.065 ↗
12. 12. O.Saray, G. Purcek and I. Karaman, Rev. Adv. Mater. Sci., 2010, vol. 25, pp. 42.
13. 13. O.Saray, G. Purcek, I. Karaman, T. Neindorf and H.J. Maier, Mater. Sci. Eng. A, 2011, vol. 528, pp. 6573-83.10.1016/j.msea.2011.05.014 ↗
14. 14. Tomáš Krajňák and Kristián Máthis, Mater. Eng., 2013, vol. 20, pp. 71-76.
15. 16. Sujoy S.Hazra, A. A. Gazder and E.V. Pereloma, Mater. Sci. Eng. A, 2009, vol. 524, pp. 158-167.10.1016/j.msea.2009.06.033 ↗
16. 17. Sujoy S.Hazra, E. V. Pereloma and A.A.Gazder, Acta Mater. 2011, vol. 59, pp. 4015-29.10.1016/j.actamat.2011.03.026 ↗
17. 18. Kristián Máthis, Tomáš Krajňák, Radomír Kuzel and Jeno Gubicza, J. Alloys Compds., 2011, vol. 509, pp. 3522-25.10.1016/j.jallcom.2010.12.142 ↗
18. 19. A.A. Gazder, Sujoy S. Hazra and E.V. Pereloma, Mater. Sci. Eng. A, 2011, vol. 530, pp. 492-503.10.1016/j.msea.2011.10.007 ↗
19. 21. Branislav Hadzima, Milos Janecek, Yuri Estrin and Hyoung Seop Kim, Mater. Sci. Eng. A, 2007, vol. 462, pp. 243-47.10.1016/j.msea.2005.11.081 ↗
20. 30. R.Z. Valiev, I.V. Alexandrov, Y.T. Zhu and T.C. Lowe, J. Mater. Res., 2002, vol.17, pp. 5-8.10.1557/JMR.2002.0002 ↗
21. R. Manna, N. K. Mukhopadhyay, G. V. S. Sastry, Metall. Mater. Trans. A, 2008, vol.39, pp.1525-1534.10.1007/s11661-007-9419-8 ↗
22. R.Manna, N. K. Mukhopadhyay, G. V. S. Sastry, Mater Sci. Forum, 2012, vol.702-703, pp.135-138.
23. O. Saray, P. Gencaga, K. Ibrahim and J.M. Hans, Metal. Mater. Trans. A., 2012, vol. 43, pp. 4320-30.10.1007/s11661-012-1238-x ↗
24. 30. P.B. Prangnell, J.R. Bowen, P.J. Apps, Mater. Sci. Eng. A, 2004, vol.375–377, pp. 178–185.10.1016/j.msea.2003.10.170 ↗
25. 31. Y. Iwahashi, M. Furukawa, Z. Horita, M. Nemoto, T.G. Langdon, Metall. Trans A. 1998, vol. 29, pp. 2245-2252.10.1007/s11661-998-0102-5 ↗
26. P.B. Prangnell and J.R. Bowen: in: Ultrafine Grained Materials II, TMS, Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran, T.C. Lowe, eds., 2002, pp. 89–98.10.1002/9781118804537.ch11 ↗
27. 40. S. Li, M. A. M. Bourke, I.J. Beyerlein, D.J. Alexander, B. Clausen, Mater. Sci. Eng. A, 2004, vol. 382, pp. 217–236.10.1016/j.msea.2004.04.067 ↗
28. 47. J.R. Bowen, A. Gholinia, S.M. Roberts, P.B. Prangnell, Mater. Sci. Eng. A, 2000, vol. 287, pp. 87–99.10.1016/S0921-5093(00)00834-0 ↗
29. 39. H. S. Kim, M. H. Seo, S. I. Hong, J. Mater. Proc. Technol. 2001, vol. 113, 622-626.10.1016/S0924-0136(01)00710-5 ↗
30. 38. V. M. Segal, Mater. Sci. Eng. A, 1999, vol. 271, pp. 322–333.10.1016/S0921-5093(99)00248-8 ↗
31. 41. S. R. Agnew, P. Mehrotra, T. M. Lillo, G. M. Stoica, P. K. Liaw, Mater. Sci. Eng A, 2005, vol. 408, pp. 72–78.10.1016/j.msea.2005.07.052 ↗
32. 45. Seung Chae Yoon, Hyoung Seop Kim, Mater. Sci. Eng A, 2008, vol. 490, pp. 438–444.10.1016/j.msea.2008.01.066 ↗
33. 42. R.K. Oruganti, P.R. Subramanian, J.S. Marte, Michael F. Gigliotti, Sundar Amancherla, Mater. Sci. Eng. A, 2005, vol. 406, pp. 102–109.10.1016/j.msea.2005.06.031 ↗
34. 46. Irene J. Beyerlein, László S. Tóth, Prog. Mater. Sci., 2009, vol. 54, 427–510.10.1016/j.pmatsci.2009.01.001 ↗
35. 44. Z. J. Zhang, I. H. Son, Y.T. Im, J.K. Park, Mater. Sci. Eng. A, 2007, vol. 447, pp134–141.10.1016/j.msea.2006.10.068 ↗
36. 43. N. M. Rusin, Phy. Metals and Metallo., 2006, vol. 102, pp. 242–249.
37. 23.R.Manna, N. K. Mukhopadhyay, G. V. S. Sastry, Mater Sci. Forum, 2012, vol. 710, pp. 241-246.10.4028/www.scientific.net/MSF.710.241 ↗
38. 25. Yoshinori Iwahashi, Jingtao Wang, Zenji Horita and Minoru Nemoto, Scripta Mater, 1996, vol. 35, pp. 143-146.10.1016/1359-6462(96)00107-8 ↗
39. 26. M. Furukawa, Y. Iwahashi, Z. Horita, M. Nemoto and T.G. Langdon, Mater. Sci. Eng. A, 1998, vol. 257, pp. 328-332.10.1016/S0921-5093(98)00750-3 ↗
40. 27. G.R. Stibitz, Phys. Rev., 1936, vol. 49, pp. 862-863.
41. 28. N. Rajmohan, Y. Hayakawa, J. A. Szpunar and J. H. Root, Acta Mater., 1997, vol. 45, pp. 2385-2494.10.1016/S1359-6454(96)00371-0 ↗
42. 29., A. Borbely, J. H. Driver and T. Ungar, Acta Mater., 2000, vol. 48, pp. 2005-16.10.1016/S1359-6454(99)00457-7 ↗
43. 33. G. E. Dieter; Mechanical Metallurgy, 3rd ed., McGraw-Hill, New York 1988, 241-265.
44. R.W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, 4th ed., Wiley India Pvt. Ltd., New York, 2011, pp. 290–298.
45. 35. W. D. Callister, Jr., Materials Science and Engineering an Introduction, 7th ed. Wiley, New York, 2010, pp. 388-391
46. V. Raghavan: Materials Science and Engineering, 5th ed., PHI learning Pvt. Ltd., New Delhi, 2010, pp. 298-310.
47. 37. José R. Tarpani, Maria H.P. Braz, Waldek W. Bose Filho, Dirceu Spinelli, Materials Research, 2002, vol. 5, pp. 357-364.10.1590/S1516-14392002000300022 ↗